Configuring a RADIUS server

To configure a RADIUS server:

1. Go to Security > Firewall Objects.

2. Select RADIUS Servers from the User & Device dropdown.

3. Click Create or select an existing server from the list and click Edit.

4. In the form, enter the following information:

   Settings	Guidelines
   Name	Enter the display name for this server.
   Primary Server Name/IP	Enter the server IP address or FQDN.
   Primary Server Secret	Enter the connection secret for the server.
   Secondary Server Name/IP	Enter the secondary server IP address or FQDN.
   Secondary Server Secret	Enter the secondary connection secret for the server.
   Authentication Scheme	Select the authentication scheme from the following: AUTO MSCHAPv2 MSCHAP CHAP PAP
   NAS IP	Enter the IP address for the network access server (NAS) for RADIUS requests.
   All User Group	Enable or disable adding the RADIUS server to all user groups.
   Additional Accounting Server	Click Create to add additional RADIUS accounting servers.

5. Click Save.