diagnose ip arp

Use these commands to manage ARP table entries:

diagnose ip arp list   Display the ARP table.
diagnose ip arp add <interface_name> <IPv4_address>   Add an ARP entry.
diagnose ip arp delete <interface_name> <IPv4_address>   Delete an ARP entry.

Example output

This is sample output of the diagnose ip arp list command:

# diagnose ip arp list

index=13 ifname=port1 172.18.20.100 00:27:0e:11:92:ba state=00000004 use=16382 confirm=14231 update=11476 ref=0

index=1 ifname=lo 0.0.0.0 00:00:00:00:00:00 state=00000040 use=43028 confirm=49028 update=43028 ref=0

index=14 ifname=port2 10.1.1.111 00:0c:29:f8:82:80 state=00000008 use=393 confirm=4092 update=394 ref=1

index=13 ifname=port1 172.18.20.62 e0:d5:5e:2c:5d:52 state=00000002 use=2794 confirm=2292 update=2292 ref=1

index=13 ifname=port1 172.18.20.71 00:09:0f:cf:64:f8 state=00000002 use=4142 confirm=0 update=3844 ref=1

index=13 ifname=port1 172.18.20.1 90:6c:ac:27:dc:2c state=00000004 use=40345 confirm=46345 update=40345 ref=0

index=13 ifname=port1 172.18.20.102 48:4d:7e:af:07:b1 state=00000002 use=16935 confirm=92 update=16780 ref=1