execute log filter

Use this command to select log messages for viewing or deletion. You can view one log category on one device at a time. Optionally, you can filter the messages to select only specified date ranges or severities of log messages. For traffic logs, you can filter log messages by source or destination IP address.

Commands are cumulative. If you omit a required variable, the command displays the current setting.

Use as many execute log filter commands as you need to define the log messages that you want to view.

execute log filter category <category>   Category name; press Enter for options.

execute log filter device <device>   Device name to get the log from; press Enter for options.

execute log filter dump  Dump current filter settings.

execute log filter field  Filter by field.
	<name>   Field name; press Enter for options.
		<argument 1>   Field search argument 1; press Enter for more help.
			<argument 2>   Field search argument 2
				<argument 3>   Field search argument 3
					<argument 4>   Field search argument 4
						<argument 5>   Field search argument 5
							<argument 6>   Field search argument 6
								<argument 7>   Field search argument 7

execute log filter ha-member <sn>   Serial number of HA member.
	
execute log filter max-checklines  Maximum number of lines to check.
	<number>   0 or (100 - 1000000).

execute log filter reset  Reset filter.
	{enter | all | <field>}   Use <enter | all> to reset all or <field> to reset only the field.

execute log filter start-line  Start line to display.
	<number>   Greater than or equal to 1

execute log filter view-lines  Lines per view.
	<number>   Number of lines to view (5 - 1000).