Resolved issues
The following issues have been fixed in FortiProxy 7.0.3. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
|
775193 |
Frequent WAD crashes cause the system to go down. |
|
775966 |
When an address group used for full inspection exemption has been changed, the change is not propagated until the SSL/SSH Inspection Profile configuration is changed in the CLI or GUI. |
| 778421 | When FortiProxy 400E is running 7.0.1, the unit uses a high amount of memory and goes into conserve mode. |
| 779259 | The documentation links in the rightmost pane do not work. |
|
779804 |
The SSH filter does not work with the explicit-web policy for SSH over HTTP traffic. |
| 781006 | FortiView does not display information for the source or destination. |
|
781096 |
When the |
| 781248 | When the arp-reply is enabled, the FortiProxy unit does not respond with the VIP of the ZTNA server. |
| 781308 | HTTPS traffic to the ZTNA server is blocked. |
|
781368 |
When a policy receives an HTTPS HEAD request and NTLM authentication is required, the connection is dropped. |
|
781893 |
Explicit proxy over transparent proxy traffic with session-based authentication and a captive portal fails. |
| 781924 | When a VIP is configured with a transparent firewall policy, the real server behind the FortiProxy unit cannot be accesses. |
| 782168 | The set remote-group command cannot be set for the system administrator. |
| 782351 | Enabling the “Show Matching Logs” option in the policy rule does not work. |
| 783235 | Deep scanning does not work when the transparent proxy policy has the proxy address and deep inspection enabled and there is another transparent proxy policy with a proxy address and certificate inspection. |
|
782865 |
If the SNI does not match the CN, the connection should not be exempted. |
|
782426 |
After upgrading from FortiOS 7.0.3 to 7.0.5 , the WAD process crashes with a signal 11 (segmentation fault) and a signal 6 (aborted). |
|
783112 |
The WAD process uses a high amount of memory, causing the system to enter conserve mode. |
|
783983 |
The transparent/explicit firewall policy is missing the “IP/MAC Based Access Control” option in the GUI. |
|
784327 |
IPv6 address objects cannot be selected in the GUI. |
|
784340 |
IPv6 explicit proxy requests are not accepted. |
|
785223 |
When the access proxy configuration is changed, there is a memory leak. |
|
785337 |
The forwarding-server-without-DNS-lookup feature is not working in FortiProxy 7.0.0 and higher. |