Fortinet black logo

Browser Isolation Deployment

Home FortiProxy 7.2.0 Browser Isolation Deployment
7.2.0
7.4.3
7.4.2
7.4.1
7.4.0
7.2.10
7.2.9
7.2.8
7.2.7
7.2.0

Prerequisites

Prerequisites

Before you deploy the Native Browser Isolation (NBI), perform the following preparation tasks:

  1. Make sure the deployment machine runs Microsoft Windows 10 (build 20H1 19041 or later) with Google Chrome installed. You can also deploy the Native Browser Isolation on VMware with a minimum of 4 GB RAM and 2 CPUs (with Hardware virtualization enabled). Refer to the FortiProxy VMware vSphere Deployment Guide for more information.

  2. Contact the customer support or sales team to request the FortiNBI isolator image by referencing ticket ID 876947. You will need to upload the image during the Browser Isolation deployment.

  3. Install FortiProxy 7.2, which is required in order to install the FortiNBI application for browser isolation. For more information about installing FortiProxy, refer to the FortiProxy Release Notes.

Previous
Next

Prerequisites

Before you deploy the Native Browser Isolation (NBI), perform the following preparation tasks:

  1. Make sure the deployment machine runs Microsoft Windows 10 (build 20H1 19041 or later) with Google Chrome installed. You can also deploy the Native Browser Isolation on VMware with a minimum of 4 GB RAM and 2 CPUs (with Hardware virtualization enabled). Refer to the FortiProxy VMware vSphere Deployment Guide for more information.

  2. Contact the customer support or sales team to request the FortiNBI isolator image by referencing ticket ID 876947. You will need to upload the image during the Browser Isolation deployment.

  3. Install FortiProxy 7.2, which is required in order to install the FortiNBI application for browser isolation. For more information about installing FortiProxy, refer to the FortiProxy Release Notes.

Previous
Next