config wanopt cache-service

Designate cache-service for wan-optimization and webcache.

config wanopt cache-service
    Description: Designate cache-service for wan-optimization and webcache.
    set prefer-scenario [balance|prefer-speed|...]
    set collaboration [enable|disable]
    set device-id {string}
    set acceptable-connections [any|peers]
    config dst-peer
        Description: Modify cache-service destination peer list.
        edit <device-id>
            set auth-type {integer}
            set encode-type {integer}
            set priority {integer}
            set ip {ipv4-address-any}
        next
    end
    config src-peer
        Description: Modify cache-service source peer list.
        edit <device-id>
            set auth-type {integer}
            set encode-type {integer}
            set priority {integer}
            set ip {ipv4-address-any}
        next
    end
end

config wanopt cache-service

Parameter	Description	Type	Size	Default
prefer-scenario	Set the preferred cache behavior towards the balance between latency and hit-ratio.	option	-	prefer-speed
	Option Description balance Balance between speed and cache hit ratio. prefer-speed Prefer response speed at the expense of increased cache bypasses. prefer-cache Prefer improving hit-ratio through increasing latency tolerance.
collaboration	Enable/disable cache-collaboration between cache-service clusters.	option	-	disable
	Option Description enable Enable cache cache-collaboration. disable Disable cache cache-collaboration.
device-id	Set identifier for this cache device.	string	Maximum length: 35	default_dev_id
acceptable-connections	Set strategy when accepting cache collaboration connection.	option	-	any
	Option Description any We can accept any cache-collaboration connection. peers We can only accept connections that are already in src-peers.

config dst-peer

Parameter	Description	Type	Size	Default
auth-type	Set authentication type for this peer.	integer	Minimum value: 0 Maximum value: 255	0
encode-type	Set encode type for this peer.	integer	Minimum value: 0 Maximum value: 255	0
priority	Set priority for this peer.	integer	Minimum value: 0 Maximum value: 255	1
ip	Set cluster IP address of this peer.	ipv4-address-any	Not Specified	0.0.0.0

config src-peer

Parameter	Description	Type	Size	Default
auth-type	Set authentication type for this peer.	integer	Minimum value: 0 Maximum value: 255	0
encode-type	Set encode type for this peer.	integer	Minimum value: 0 Maximum value: 255	0
priority	Set priority for this peer.	integer	Minimum value: 0 Maximum value: 255	1
ip	Set cluster IP address of this peer.	ipv4-address-any	Not Specified	0.0.0.0