config system geoip-override

Configure geographical location mapping for IP address(es) to override mappings from FortiGuard.

config system geoip-override
    Description: Configure geographical location mapping for IP address(es) to override mappings from FortiGuard.
    edit <name>
        set description {string}
        set country-id {string}
        config ip-range
            Description: Table of IP ranges assigned to country.
            edit <id>
                set start-ip {ipv4-address}
                set end-ip {ipv4-address}
            next
        end
        config ip6-range
            Description: Table of IPv6 ranges assigned to country.
            edit <id>
                set start-ip {ipv6-address}
                set end-ip {ipv6-address}
            next
        end
    next
end

config system geoip-override

Parameter	Description	Type	Size	Default
description	Description.	string	Maximum length: 127
country-id	Two character Country ID code.	string	Maximum length: 2

config ip-range

Parameter	Description	Type	Size	Default
start-ip	Starting IP address, inclusive, of the address range (format: xxx.xxx.xxx.xxx).	ipv4-address	Not Specified	0.0.0.0
end-ip	Ending IP address, inclusive, of the address range (format: xxx.xxx.xxx.xxx).	ipv4-address	Not Specified	0.0.0.0

config ip6-range

Parameter	Description	Type	Size	Default
start-ip	Starting IP address, inclusive, of the address range (format: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx).	ipv6-address	Not Specified	::
end-ip	Ending IP address, inclusive, of the address range (format: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx).	ipv6-address	Not Specified	::