Creating network interfaces
Create the following network interfaces:
- The first network interface is for FortiSandbox port1.
- The second network interface is for FortiSandbox port2.
- If you want to use HA-Cluster on multiple FortiSandbox Azure units, create a third network interface is for FortiSandbox port3.
To create a network interface in Azure:
- In the Azure portal, click Network interfaces in the left pane.
- Click Add to create a new network interface.
- Enter the following information:
Name
VM name.
Virtual network
Select your VNet.
Subnet
One subnet under your VNet. Each interface you create must be on a different subnet.
Static.
Private IP address
Self-defined static IP address.
Network security group
Select the security group you created.
Private IP address (IPv6)
Unchecked.
Subscription
Subscription type.
Resource group
The resource group you created in the Creating a resource group step.
Location
Select the same location used while setting up the resource group.
- Repeat these steps to create the network interfaces you need.
- Associate the network interface used for the FSA admin port (port1) with the Public IP address in the IP configuration section.