System configuration checklist
The System configuration checklist is located in the banner next the CLI Console. This checklist automatically detects the status of key configurations to ensure a normal operational state and warns you when an action is required. To modify the configurations, click the recommendation in the list to be redirected to the respective configuration page. To ignore a warning, click the alarm clock icon to turn it off.
|
Item |
Warning |
Recommended action |
Notes |
|---|---|---|---|
|
FSA-VM license |
Expired and invalid Firmware licenses |
Upload the license file. |
Only for FSA-VM model. |
|
Service Licenses |
Expired and invalid licenses |
Renew the service contract and upload the new license file. |
|
|
Network configured |
Port link down, no static route, etc. |
Check network configuration and connection, whether there is a port down, or DNS and routing misconfigurations. |
|
|
Engines downloaded |
No valid trace and rating engines, FDN Connection or Download Failure |
Check if the license is valid, FortiGuard configuration and FDN server connection. |
|
|
Default VM installed |
No default VM installed |
Install the default VM. Only for VM models. |
This item is not supported in Public Cloud Models (AWS, Azure, GCP, OCI). |
|
VM internet connectivity |
Port3 cannot access the internet |
Go to System >Settings page and enable the VM External Network Access. |
This item is not supported in Public Cloud Models (AWS, Azure, GCP, OCI). |
|
Cloud VM Region Selected |
Windows Cloud VM Region Setting |
Go to System > FortiGuard page to configure FortiSandbox Windows Cloud VM Settings |
As long as Windows Cloud VM is activated with 1 or more clones, there will be a warning to remind users checking Window Cloud VM region setting. |
|
Dynamic scan configured |
No any VM clones enabled |
Enable at least one VM clone. |
Not available in the Cluster environment |
|
VM file type associated |
No enabled clones associated with the file type. |
Go to Scan Profile page to associate the proper file types to the enabled VMs. |
|
|
Latest firmware |
New firmware upgrade is available |
Update the firmware to the latest version. Click the warning item, and navigate to the firmware upgrade page. The upgradable firmware should be listed. For more information, see FortiSandbox Release Notes. |
|
|
Remote logging |
No log server is configured and enabled |
Configure logging to a remote server (for example, FortiAnalyzer, Syslog). |
|