Configuring port speed and status
To set port speed and other base port settings:
config switch-controller managed-switch
edit <FortiSwitch_serial_number>
config ports
edit <port_name>
set description <text>
set speed <speed>
set status {down | up}
end
end
For example:
config switch-controller managed-switch
edit S524DF4K15000024
config ports
edit port1
set description "First port"
set speed auto
set status up
end
end
To check the port properties:
diagnose switch-controller switch-info port-properties [<FortiSwitch_serial_number>] [<port_name>]
If the FortiSwitch serial number is not specified, results for all FortiSwitch units are returned. If the port name is not specified, results for all ports are returned.
For example:
FSWMVMTM21000005 (vdom1) # diagnose switch-controller switch-info port-properties S108DVTM20002500 port2 Switch: S108DVTM20002500 Port: port2 PoE : Connector : RJ45 Speed :