Fortinet black logo

Managed Switch Release Notes

Home FortiSwitch 7.0.8 Managed Switch Release Notes
7.0.8
7.0.14
7.0.13
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.6
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.15
6.4.13
6.4.12
6.4.11
6.4.10
6.4.9
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.11
6.2.10
6.2.9
6.2.8
6.2.4
6.2.3
6.2.2
6.2.1
6.2.0

Resolved issues

Resolved issues

The following issues have been fixed in FortiOS 7.0.8. For inquiries about a particular bug, please contact Customer Service & Support.

Bug ID Description

777145

The Managed FortiSwitches page incorrectly shows a warning about an unregistered FortiSwitch unit even though it is registered. This only impacts transferred or RMAed FortiSwitch units. This is only a display issue with no impact on the FortiSwitch unitʼs operation.
794026 The number of targets that can be configured in the config user quarantine command has been raised from 256 to 4,000.

803307

The Security Rating message of “Enable STP” was changed to “To avoid a switching loop, enable STP on the FortiSwitch ports once network topology is stable.”
805154 The pre-configuration for FS-108F-POE shows the wrong number of PoE ports.
810550 When synchronizing the configuration between the FortiGate device and some managed FortiSwitch units, “errno = 6” appears in the error logs.

825377

After upgrading to FortiOS 7.0.6, there are multiple problems in the GUI for a FortiLink topology with VDOMs enabled.

836604

The command for the managed switch port speed for a 40-Gbps copper interface was missing. You can now select set speed 40000cr4.

838110

The set speed 25000cr4 command was changed to set speed 25000cr, and the set speed 25000sr4 command was changed to set speed 25000sr.

838880

When you use NAC policies with EMS tags and switch groups, the endpoint does not match any policy if the endpoint matches both EMS tags and the switch groups are different.
Previous
Next

Resolved issues

The following issues have been fixed in FortiOS 7.0.8. For inquiries about a particular bug, please contact Customer Service & Support.

Bug ID Description

777145

The Managed FortiSwitches page incorrectly shows a warning about an unregistered FortiSwitch unit even though it is registered. This only impacts transferred or RMAed FortiSwitch units. This is only a display issue with no impact on the FortiSwitch unitʼs operation.
794026 The number of targets that can be configured in the config user quarantine command has been raised from 256 to 4,000.

803307

The Security Rating message of “Enable STP” was changed to “To avoid a switching loop, enable STP on the FortiSwitch ports once network topology is stable.”
805154 The pre-configuration for FS-108F-POE shows the wrong number of PoE ports.
810550 When synchronizing the configuration between the FortiGate device and some managed FortiSwitch units, “errno = 6” appears in the error logs.

825377

After upgrading to FortiOS 7.0.6, there are multiple problems in the GUI for a FortiLink topology with VDOMs enabled.

836604

The command for the managed switch port speed for a 40-Gbps copper interface was missing. You can now select set speed 40000cr4.

838110

The set speed 25000cr4 command was changed to set speed 25000cr, and the set speed 25000sr4 command was changed to set speed 25000sr.

838880

When you use NAC policies with EMS tags and switch groups, the endpoint does not match any policy if the endpoint matches both EMS tags and the switch groups are different.
Previous
Next