Resolved issues
The following issues have been fixed in FortiOS 7.2.1. For inquiries about a particular bug, please contact Customer Service & Support.
Bug ID | Description |
---|---|
746618 | The FortiSwitch Ports page for a VDOM does not show the correct link status for exported ports. |
774441 | FortiLink topology only displays partially. |
782734 | Managed switches in VDOMs are not being synchronized in an HA cluster. |
794026 | The number of targets that can be configured in the config user quarantine command has been raised from 256 to 4,000. |
795687 |
Some managed FortiSwitch units are not shown on the Fabric Management page. |
799860 | SNMP takes longer to report the change in the managed FortiSwitch status than the CLI. |
802786 | Virtual IP addresses cannot be used in a FortiGate device to redirect the public IP address to the private IP address of the FortiSwitch unit. |
803307 | The Security Rating message for enabling STP should be changed to cover all managed switch ports, instead of just edge ports. |
805154 |
The pre-configuration for FS-108F-POE shows the wrong number of PoE ports. |
810550 |
When synchronizing the configuration between the FortiGate device and some managed FortiSwitch units, “errno = 6” appears in the error logs. |