Resolved issues
The following issues have been fixed in FortiOS 7.2.5. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
|
730472 |
Initial ARP resolutions are slow when FortiSwitch-enabled VLANs are using access VLANs and proxy ARP. |
|
762615, 765283 |
The FortiLink flcfg daemon crashes when the configurations pushed to the FortiSwitch unit include the quarantine MAC addresses. |
| 814674 |
When upgrading a FortiAP or FortiSwitch unit that is connected to a downstream FortiGate device, a “Failed to retrieve upgrade progress” message appears. |
| 828901 | FortiSwitch and FortiAP units are disconnected when the wireless system daemon (hostapd) crashes. |
|
831439 |
Multiple DHCP servers can be configured for the same range on an interface when the interface name contains a comma. |
|
848822 |
The Security Rating page incorrectly lists the version number of the 7.2 FortiAP and FortiSwitch firmware as unknown. |
|
853414 |
After upgrading from 7.0.5 to 7.0.7, the Policy and Dashboard widgets do not load when the FortiGate device manages a FortiSwitch unit with tenant ports. |
|
853718 |
After upgrading to build 1255 (FortiOS 7.2.2 GA), the layer-3 FortiLink should come up. |
| 853811 | The Link Aggregation Control Protocol (LACP) flaps after the interfaces connecting to LACP are shut down and then restarted from the switch side. |
|
854104 |
There was high CPU usage when DHCP-snooping was enabled on 30 VLANs. |
| 857778 | When a VLAN is changed on a FortiGate device, the changes are pushed to the managed FortiSwitch unit but do not take effect. |
| 858113 | When the admin profile was created on a FortiGate device, the Diagnostics and Tools page for a FortiSwitch unit cannot be displayed with limited access permissions. |
| 859845 | Sometimes the correct host names for access points are not displayed in the FortiSwitch Ports window. |
| 876021 | After the FortiGate device is restarted, the FortiLink virtual managed-switch port status is not pushed. |
| 886887 | The FortiAnalyzer event log receives too many messages about FortiSwitch MAC entries being discovered. |
|
897004 |
On rare occasions, the FortiOS GUI might display blank pages when the user navigates from one menu to another if there is a managed FortiSwitch unit present. |