Known issues
The following known issues have been identified with FortiSwitchOS 7.2.4. For inquiries about a particular bug or to report a bug, please contact Fortinet Customer Service & Support.
| Bug ID | Description |
|---|---|
| 382518, 417024, 417073, 417099, 438441 | DHCP snooping and dynamic ARP inspection (DAI) do not work with private VLANs (PVLANs). |
| 414972 | IGMP snooping might not work correctly when used with 802.1x Dynamic VLAN functionality. |
| 510943 | The time-domain reflectometer (TDR) function (cable diagnostics feature) reports unexpected values. Workaround: When using the cable diagnostics feature on a port (with the diagnose switch physical-ports cable-diag <physical port name> CLI command), ensure that the physical link on its neighbor port is down. You can disable the neighbor ports or physically remove the cables. |
| 548783 | Some models support setting the mirror destination to “internal.” This is intended only for debugging purposes and might prevent critical protocols from operating on ports being used as mirror sources. |
| 609375 | The FortiSwitchOS supports four priority levels (critical, high, medium, and low); however, The SNMP Power Ethernet MIB only supports three levels. To support the MIB, a power priority of medium is returned as low for the PoE MIB. |
|
748210 |
The MAC authentication bypass (MAB) sometimes does not work on the FS-424E when a third-party hub is disconnected and then reconnected. |
|
793145 |
VXLAN does not work with the following:
|
|
829807 |
eBGP does not advertise routes to its peer by default unless the |