Resolved issues
The following issues have been fixed in FortiOS 7.4.2. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
|
676306, 719694 |
When there is a connection issue between the FortiGate device and a managed FortiSwitch unit, unexpected behavior might occur in the HTTP and HTTPS daemon when navigating between switch-controller-related GUI pages. |
|
703374 |
The FGT-100F with FS-124F does not work with SP-CABLE-FS-SFP+3 or SP-CABLE-FS-SFP+5. |
|
816790 |
After disconnecting a managed switch and then re-connecting it to the FortiGate device, the console displays “dsl entry for is NULL” error messages. |
|
818116 |
The link status of the managed switch port needs to be reported as part of the CMDB status. |
| 891642 | The FortiGate 6000 and 7000 platforms do not support managing FortiSwitch devices over FortiLink. |
| 904834 | The FortiGate and FortiManager devices have different definitions for poe-detection-type for the FS-108E-FPOE model. |
|
911232 |
After a FortiGate device is upgraded to FortiOS 7.2.4, the Security Rating Issues incorrectly show the FortiSwitch units as “Not Registered.” |
|
924654 |
The MAC address flaps on the FortiSwitch unit when a UDP packet passes through a virtual wire pair multiple times with ASIC offload. |
| 931694 | The FortiGate log should show the FortiSwitch port number in the event log for rogue DHCP server detection. |
| 931710 | The FortiLink VXLAN topology displayed in the FortiGate GUI does not match the actual topology. |
| 941673 | The FortiLink event logs show the FortiSwitch identifier instead of the serial number when the status of CAPWAP changes. |
|
945426 |
After a managed switch is restarted, the link aggregation group (LAG) members are not displaying the correct status on the FortiGate device. |
| 945779 | The FortiLink daemon increases the FortiGate VM's CPU consumption when managing too many switches. |
|
946943 |
The WiFi & Switch Controller menu options should not be available in the management VDOM on Session-Aware Load Balanced Cluster (SLBC) devices. |
|
949377 |
The network access control (NAC) policy is not matching the MAC address with the correct VLAN unless the NAC policy is deleted and then re-created. |
|
953918 |
The FortiGate NAC segment is not showing the assigned dynamic VLAN on the FortiSwitch ports. |
|
954356 |
If you connect to the FortiGate GUI on a mobile phone, the table content on some pages (for example, Network > Interfaces, Policies & Objects > Firewall Policies, and Wifi & Switch Controller > Managed FortiSwitches) is cut off. |
|
961188, 963375, 972931 |
There are three related issues:
|
|
961997 |
Using the object identifier (OID) 1.3.6.1.2.1.2.2.1.2 does not retrieve interface descriptions for the FortiLink ports. |
|
978169 |
When the FS-1048E is an MCLAG ICL peer, it does not join FortiLink. |