Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

IPv6 support

The features below support IPv6-to-IPv6 forwarding in Reverse Proxy, Offline Protection, True Transparent Proxy, and Transparent Inspection operation modes.

NAT64 and NAT46 are supported only in Reverse Proxy mode. No matter the virtual server and the back-end server are in IPv4 or IPv6 addresses, or mixed with both, IPv4-to-IPv6 and IPv6-to-IPv4 forwarding are fully supported by the following features in Reverse Proxy mode.

Features not yet supported are:

If a policy has any virtual servers or server pools that contain physical or domain servers with IPv6 addresses, it does not apply these features, even if they are selected.
  • Shared IP
  • Policy bypasses for known search engines
  • Firewall
  • Log-based reports
  • Alert email
  • Syslog and FortiAnalyzer IP addresses
  • NTP
  • FTP immediate/scheduled
  • SCEP
  • Anti-defacement
  • HA/Configuration sync
  • exec restore
  • exec backup
  • exec traceroute
  • exec telnet

IPv6 support

The features below support IPv6-to-IPv6 forwarding in Reverse Proxy, Offline Protection, True Transparent Proxy, and Transparent Inspection operation modes.

NAT64 and NAT46 are supported only in Reverse Proxy mode. No matter the virtual server and the back-end server are in IPv4 or IPv6 addresses, or mixed with both, IPv4-to-IPv6 and IPv6-to-IPv4 forwarding are fully supported by the following features in Reverse Proxy mode.

Features not yet supported are:

If a policy has any virtual servers or server pools that contain physical or domain servers with IPv6 addresses, it does not apply these features, even if they are selected.
  • Shared IP
  • Policy bypasses for known search engines
  • Firewall
  • Log-based reports
  • Alert email
  • Syslog and FortiAnalyzer IP addresses
  • NTP
  • FTP immediate/scheduled
  • SCEP
  • Anti-defacement
  • HA/Configuration sync
  • exec restore
  • exec backup
  • exec traceroute
  • exec telnet