Application Delivery - Waiting Room

If you find your Waiting Room feature does not work as expected, follow the steps below for troubleshooting:

1. Run the following diagnose debug commands:

   # diagnose policy wr-state list <policy-name>

   # diagnose debug proxy cmdb-module 7

   # diagnose debug proxy thread-wr 7

   # diagnose debug flow filter module-detail waiting-room 7

2. Run the following commands:

   # diagnose debug flow trace start

   # diagnose debug timestamp enable

   # diagnose debug flow filter flow 0

   # diagnose debug enable

3. Here is an example output of the debug command:

   • diagnose policy wr-state list <policy-name>

     This command check the waiting room policy statistics based on the specified server policy.

     

   • diagnose debug proxy cmdb-module 7

     This command shows the debug information for waiting room configuration load status.

     

   • diagnose debug proxy thread-wr 7

     This command shows the debug information for waiting room thread.

     

   • diagnose debug flow filter module-detail waiting-room 7

     This command checks all waiting room users' process information.