Known Issues
These are the known issues in this release of FortiWLC. Controller issues listed in this section are applicable on all models unless specified; AP issues are applicable to specific models.
|
Tracking ID |
Description |
Impact |
Workaround |
|---|---|---|---|
|
564529 |
Clients do not obtain an IP address when Port Profile is configured in the in tunnel mode. |
|
|
|
655788 |
[FAP-U43xF/FAP-U231F] Intermittent loss of data observed as continuous Request To Send (RTS) frames are not acknowledged with Clear To Send (CTS) by the AP. |
|
|
| 678464 | Rogue AP scanning does not work post upgrade. |
Configure the token in Rogue AP settings. |
|
| 684659 | The syslog host configuration is lost after migration. | ||
| 685389 | [FAP-U42xEV/U43F] The VLAN trunking feature is not working. | ||
| 697607 | [FAP-U23xF] : Multicast traffic does not pass with power-save client if the Multicast-to-Unicast Conversion is disabled. | Client connectivity impacted. | |
|
732150 |
[FAP-U432F] Wired client is unable to obtain the IP address. | ||
|
763190 |
Fault Tolerance not supported in VM deployed with ESXi version 7.0. |
|
|