Fixed Issues
These are the fixed issues in this release of FortiWLC. Controller issues listed in this section are applicable on all models unless specified; AP issues are applicable to specific models.
|
Tracking ID |
Description |
|---|---|
|
695771 |
[FAP-U431/FAP-U432F/FAP-U433F] The age inactive timer was not cleared for probe clients. |
| 705366 | [FAP-U431F/FAP-U433F] Low download speed on clients connecting on bridge SSID. |
|
718500 |
Lag observed in BLE location stream. |
|
728707 |
[FAP-U431F/FAP-U433F] Random connection drops or ping drops to gateway observed from mobile devices. |
|
733836 |
[FAP-U431F/FAP-U433F] Zero channel utilization was reported. |
|
735449 |
Unable to upgrade the controller sometimes. |
|
747942 |
Random hostapd crashes observed; none of the clients were able to associate to 802.1x SSID. |
|
762682 |
Unable to add APs to the controller, after the AP ID count of 9999 is reached. |
|
783465 |
[FAP-U431F/FAP-U433F/FAP-U231F] 802.11 radio interfaces operate in the Power Down state due to AF power. |
|
787488 |
Some configurations are not included in the running configuration file when FortiWLC diagnostics were collected. |
|
798376 |
[Nplus1] The replacement controller did not take over configuration from standby/active. |
|
801801 |
The FortiAP memory usage increased consistently over time causing client connectivity issues. |
|
802859 |
The FWC-200D controller became unresponsive after running the poweroff controller command. |
|
805305 |
VLAN, security profile, and RADIUS profile configurations were missing from the diagnostics file. |
|
809406 |
[FAP-U231F] Sometimes clients were unable to connect to the SSID until the AP was rebooted. |
|
810327 |
Local admin user with privilege level 1 could not view AP information in Config > Devices > APs. |
|
820925 |
Admins were not able to create new guest users with privilege level 10. |
| 821826 | [AP822] Random AP reboot. |
| 823566 | SSID not broadcasted on DFS channels with country code set to South Africa. |
|
825761 |
[FAP-U433F] Unable to change the channel or the channel width to 80Mhz on the 5Ghz band. |