Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

Password

Use this command to set a password. This password is used for authentication between the GLB and the server. The same password must be set on both, otherwise the two will not be able to sync.

Before you begin:

  • You must have read-write permission for global load balancing settings.

Syntax

config global-load-balance setting

set auth-type <none/TCP_MD5SIG/auth_verify>

set password <string>

end

auth-type

Select one of the following:

  • none
  • TCP_MD5SIG
  • auth_verify

password

If you choose TCP_MD5SIG or auth_verify for auth-type, then you must enter the corresponding password.

Example

FortiADC-docs # config global-load-balance setting

FortiADC-docs (setting) # get

password : *

proximity-detect-protocol : icmp

proximity-detect-retry-count : 3

proximity-cache-mask-length : 24

proximity-cache-mask-length6 : 64

proximity-detect-interval : 3

proximity-cache-aging-period : 86400

persistence-mask-length : 24

persistence-mask-length6 : 64

persistence-timeout : 60

set auth-type TCP_MD5SIG

FortiADC-docs (setting) #set password *

FortiADC-docs (setting) # end

Password

Use this command to set a password. This password is used for authentication between the GLB and the server. The same password must be set on both, otherwise the two will not be able to sync.

Before you begin:

  • You must have read-write permission for global load balancing settings.

Syntax

config global-load-balance setting

set auth-type <none/TCP_MD5SIG/auth_verify>

set password <string>

end

auth-type

Select one of the following:

  • none
  • TCP_MD5SIG
  • auth_verify

password

If you choose TCP_MD5SIG or auth_verify for auth-type, then you must enter the corresponding password.

Example

FortiADC-docs # config global-load-balance setting

FortiADC-docs (setting) # get

password : *

proximity-detect-protocol : icmp

proximity-detect-retry-count : 3

proximity-cache-mask-length : 24

proximity-cache-mask-length6 : 64

proximity-detect-interval : 3

proximity-cache-aging-period : 86400

persistence-mask-length : 24

persistence-mask-length6 : 64

persistence-timeout : 60

set auth-type TCP_MD5SIG

FortiADC-docs (setting) #set password *

FortiADC-docs (setting) # end