Fortinet black logo

CLI Reference

diagnose debug cmdb

diagnose debug cmdb

Use this command to set the debug level for CLI commands. The debug messages are returned when you enter CLI commands.

Syntax

diagnose debug cmdb [<level>] <Enter>

<Enter>

If you do not specify a debug level and press Enter, the command displays the current debug level.

<level>

Valid range is 0 to 8, where 0 disables debug logs and 8 generates the most verbose logging.

Example

FortiADC-VM # diagnose debug cmdb 8

After you set the debug level, messages are written to the CLI when you enter commands:

FortiADC-VM # config system interface

FortiADC-VM (interface) # edit 2

Add new entry '2' for node 1

FortiADC-VM (2) # set ip 123

set attribute [4]ip

invalid ip address/mask 123.

data converting failed 4

Command fail. Return code is -39

FortiADC-VM (2) # end

attribute 'type' must be set

fgtlog: added a new entry '2' failed (-56) for "system interface"

Command fail. Return code is -56

FortiADC-VM #

diagnose debug cmdb

diagnose debug cmdb

Use this command to set the debug level for CLI commands. The debug messages are returned when you enter CLI commands.

Syntax

diagnose debug cmdb [<level>] <Enter>

<Enter>

If you do not specify a debug level and press Enter, the command displays the current debug level.

<level>

Valid range is 0 to 8, where 0 disables debug logs and 8 generates the most verbose logging.

Example

FortiADC-VM # diagnose debug cmdb 8

After you set the debug level, messages are written to the CLI when you enter commands:

FortiADC-VM # config system interface

FortiADC-VM (interface) # edit 2

Add new entry '2' for node 1

FortiADC-VM (2) # set ip 123

set attribute [4]ip

invalid ip address/mask 123.

data converting failed 4

Command fail. Return code is -39

FortiADC-VM (2) # end

attribute 'type' must be set

fgtlog: added a new entry '2' failed (-56) for "system interface"

Command fail. Return code is -56

FortiADC-VM #