Adding an endpoint policy

To add an endpoint policy:

1. Go to Endpoint Policy & Components > Manage Policies.
2. Click Add.
3. Complete the following fields:

   Endpoint Policy Name	Enter the desired endpoint policy name.
   Endpoint Groups	Select the device and/or user group to apply the policy to. You can select a group from all imported domains and workgroups.
   Users	Search for and select desired domain users to apply the policy to.
   Profile	Include an endpoint profile in the policy. From the dropdown list, select the desired endpoint profile.
   Profile (Off-Fabric)	Include an endpoint profile in the policy to apply to the endpoint when it is off-fabric according to the on-fabric detection rules configured in this policy. For example, you may want to apply a more restrictive profile to the endpoint when it is determined to be off-fabric. From the dropdown list, select the desired endpoint profile. If including an off-fabric profile in a policy, also including on-fabric detection rules in the policy is recommended. Otherwise, EMS may not apply on-fabric and off-fabric profiles as desired.
   On-Fabric Detection Rules	Select the on-fabric detection rules to include in the policy. You can select multiple rules. You must have already created on-fabric detection rules to include them in an endpoint policy. See On-fabric Detection Rules.
   Comments	Enter any comments desired for the endpoint policy.
   Enable the Policy	Toggle to enable or disable the endpoint policy. You can enable or disable the policy at a later time from Endpoint Policy & Components Manage Policies.

4. Click Save. You can view the newly created policy on the Endpoint Policy & Components > Manage Policies page.

   

   EMS pushes these settings to the endpoint with the next Telemetry communication.