config hchk

Configures measuring latency/loss/jitter.

Config hchk

Edit <name>
		Set protocol [ping | http | dns]
		Set interval [1 – 3600]
		Set probe-cnt [1 – 10]
		Set probe-tm [1 – 10]
		Set *probe-target {ipv4-address}
		Set port [1 – 65535] *available when protocol is set to http
		Set http-get {string} *available when protocol is set to http
		Set interface <name1>
		Set src-type [none | interface | ip]
		Set *stc-iface <name1> *available when src-type is set to interval
		Set *src-ip {ipv4-address} *available when src-type is set to ip 
		Set filter <name1>, <name2>, …
		Unset
		Next 
		Show
		Abort
		End
	Delete <name>
	Purge
	Show
	End
Show
End

Sample command:

FX201E5919000057 (hmon) # show
config hmon
    config interface-monitoring
        edit 1
            set interval 30
            set interface wan
            set filter rx-bps rx-bytes rx-dropped rx-packets
        next
    end
    config hchk
        edit 1
            set protocol ping
            set interval 5
            set probe-cnt 1
            set probe-tm 2
            set probe-target 8.8.8.8
            set interface wan
            set src-type interface
            set src-iface wan
            set filter rtt loss
        next
    end
end