config auto-switch

Description: Configures settings related to SIM card switching.

Set by-disconnect [enable | disable]

Set by-signal [enable | disable]

Set by-data-plan [enable | disable]

Set switch-back [by-time | by-timer]

Set switch-back-time (HH:MM) *only available if by-time is set

Set switch-back-timer (3600 – 2147483647)

Set pause-modem-manager [enable | disable]

Set cert-mode [enable | disable]

Set default-sim [sim1 | sim2 | by-carrier | by-cost]

Set preferred-carrier <name > *only available if default-sim is set to by-carrier

Set session-down-detection (1 – 60)

Set gps [enable | disable]

Set sim1-pin [enable | disable]

Set sim1-pin-code {0,4} *only accepts integers [0-9] when sim1-pin is enabled

Set sim2-pin [enable | disable]

Set sim2-pin-code {0,4} *only accepts integers [0-9] when sim2-pin is enabled

Unset

Show

End

Sample command:

FX201E5919000057 (modem1) # show

config lte setting modem1

set pause-modem-manager disable

set default-sim by-carrier

set preferred-carrier Verizon

set session-down-detection 3

set gps enable

set sim1-pin disable

set sim2-pin disable

config auto-switch

set by-disconnect enable

set by-signal enable

set by-data-plan enable

set disconnect-threshold 3

set disconnect-period 600

set switch-back by-time by-timer

set switch-back-time 12:22

set switch-back-timer 3600

end

end