config wireless-controller wtp
Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
config wireless-controller wtp
Description: Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
edit <wtp-id>
set index {integer}
set admin [discovered|disable|...]
set name {string}
set location {string}
set region {string}
set region-x {string}
set region-y {string}
set wtp-profile {string}
set wtp-mode [normal|remote]
set bonjour-profile {string}
set override-led-state [enable|disable]
set led-state [enable|disable]
set override-wan-port-mode [enable|disable]
set wan-port-mode [wan-lan|wan-only]
set override-ip-fragment [enable|disable]
set ip-fragment-preventing {option1}, {option2}, ...
set tun-mtu-uplink {integer}
set tun-mtu-downlink {integer}
set override-split-tunnel [enable|disable]
set split-tunneling-acl-path [tunnel|local]
set split-tunneling-acl-local-ap-subnet [enable|disable]
config split-tunneling-acl
Description: Split tunneling ACL filter list.
edit <id>
set dest-ip {ipv4-classnet}
next
end
set override-lan [enable|disable]
config lan
Description: WTP LAN port mapping.
set port-mode [offline|nat-to-wan|...]
set port-ssid {string}
set port1-mode [offline|nat-to-wan|...]
set port1-ssid {string}
set port2-mode [offline|nat-to-wan|...]
set port2-ssid {string}
set port3-mode [offline|nat-to-wan|...]
set port3-ssid {string}
set port4-mode [offline|nat-to-wan|...]
set port4-ssid {string}
set port5-mode [offline|nat-to-wan|...]
set port5-ssid {string}
set port6-mode [offline|nat-to-wan|...]
set port6-ssid {string}
set port7-mode [offline|nat-to-wan|...]
set port7-ssid {string}
set port8-mode [offline|nat-to-wan|...]
set port8-ssid {string}
end
set override-allowaccess [enable|disable]
set allowaccess {option1}, {option2}, ...
set override-login-passwd-change [enable|disable]
set login-passwd-change [yes|default|...]
set login-passwd {password}
config radio-1
Description: Configuration options for radio 1.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-analysis [enable|disable]
set spectrum-analysis [enable|disable]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
end
config radio-2
Description: Configuration options for radio 2.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-analysis [enable|disable]
set spectrum-analysis [enable|disable]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
end
config radio-3
Description: Configuration options for radio 3.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-analysis [enable|disable]
set spectrum-analysis [enable|disable]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
end
config radio-4
Description: Configuration options for radio 4.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-analysis [enable|disable]
set spectrum-analysis [enable|disable]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
end
set image-download [enable|disable]
set mesh-bridge-enable [default|enable|...]
set coordinate-latitude {string}
set coordinate-longitude {string}
next
end
config wireless-controller wtp
|
Parameter |
Description |
Type |
Size |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
index |
Index . |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||
|
admin |
Configure how the FortiGate operating as a wireless controller discovers and manages this WTP, AP or FortiAP. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
name |
WTP, AP or FortiAP configuration name. |
string |
Maximum length: 35 |
|||||||||
|
location |
Field for describing the physical location of the WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|||||||||
|
region |
Region name WTP is associated with. |
string |
Maximum length: 35 |
|||||||||
|
region-x |
Relative horizontal region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
|||||||||
|
region-y |
Relative vertical region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
|||||||||
|
wtp-profile |
WTP profile name to apply to this WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|||||||||
|
wtp-mode |
WTP, AP, or FortiAP operating mode; normal or remote. A tunnel mode SSID can be assigned to an AP in normal mode but not remote mode, while a local-bridge mode SSID can be assigned to an AP in either normal mode or remote mode. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
bonjour-profile |
Bonjour profile name. |
string |
Maximum length: 35 |
|||||||||
|
override-led-state |
Enable to override the profile LED state setting for this FortiAP. You must enable this option to use the led-state command to turn off the FortiAP's LEDs. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
led-state |
Enable to allow the FortiAPs LEDs to light. Disable to keep the LEDs off. You may want to keep the LEDs off so they are not distracting in low light areas etc. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-wan-port-mode |
Enable/disable overriding the wan-port-mode in the WTP profile. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
wan-port-mode |
Enable/disable using the FortiAP WAN port as a LAN port. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-ip-fragment |
Enable/disable overriding the WTP profile IP fragment prevention setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
ip-fragment-preventing |
Method. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
tun-mtu-uplink |
The maximum transmission unit . |
integer |
Minimum value: 576 Maximum value: 1500 |
|||||||||
|
tun-mtu-downlink |
The MTU of downlink CAPWAP tunnel . |
integer |
Minimum value: 576 Maximum value: 1500 |
|||||||||
|
override-split-tunnel |
Enable/disable overriding the WTP profile split tunneling setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
split-tunneling-acl-path |
Split tunneling ACL path is local/tunnel. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
split-tunneling-acl-local-ap-subnet |
Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL . |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-lan |
Enable to override the WTP profile LAN port setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-allowaccess |
Enable to override the WTP profile management access configuration. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
allowaccess |
Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-login-passwd-change |
Enable to override the WTP profile login-password (administrator password) setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
login-passwd-change |
Change or reset the administrator password of a managed WTP, FortiAP or AP . |
option |
- |
|||||||||
|
|
|
|||||||||||
|
login-passwd |
Set the managed WTP, FortiAP, or AP's administrator password. |
password |
Not Specified |
|||||||||
|
image-download |
Enable/disable WTP image download. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
mesh-bridge-enable |
Enable/disable mesh Ethernet bridge when WTP is configured as a mesh branch/leaf AP. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
coordinate-latitude |
WTP latitude coordinate. |
string |
Maximum length: 19 |
|||||||||
|
coordinate-longitude |
WTP longitude coordinate. |
string |
Maximum length: 19 |
|||||||||
config split-tunneling-acl
|
Parameter |
Description |
Type |
Size |
|---|---|---|---|
|
dest-ip |
Destination IP and mask for the split-tunneling subnet. |
ipv4-classnet |
Not Specified |
config lan
|
Parameter |
Description |
Type |
Size |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port-mode |
LAN port mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port-ssid |
Bridge LAN port to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port1-mode |
LAN port 1 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port1-ssid |
Bridge LAN port 1 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port2-mode |
LAN port 2 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port2-ssid |
Bridge LAN port 2 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port3-mode |
LAN port 3 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port3-ssid |
Bridge LAN port 3 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port4-mode |
LAN port 4 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port4-ssid |
Bridge LAN port 4 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port5-mode |
LAN port 5 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port5-ssid |
Bridge LAN port 5 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port6-mode |
LAN port 6 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port6-ssid |
Bridge LAN port 6 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port7-mode |
LAN port 7 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port7-ssid |
Bridge LAN port 7 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port8-mode |
LAN port 8 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port8-ssid |
Bridge LAN port 8 to SSID. |
string |
Maximum length: 15 |
|||||||||||
config radio-1
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 1 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power . |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-2
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 2 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power . |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-3
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 3 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power . |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-4
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 4 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power . |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points . |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||