config system pppoe-interface

Configure the PPPoE interfaces.

config system pppoe-interface

Description: Configure the PPPoE interfaces.

edit <name>

set dial-on-demand [enable|disable]

set ipv6 [enable|disable]

set device {string}

set username {string}

set password {password}

set auth-type [auto|pap|...]

set ipunnumbered {ipv4-address}

set pppoe-unnumbered-negotiate [enable|disable]

set idle-timeout {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

next

end

config system pppoe-interface

Parameter	Description	Type	Size
dial-on-demand	Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.	option	-
	Option Description enable Enable dial on demand. disable Disable dial on demand.
ipv6	Enable/disable IPv6 Control Protocol (IPv6CP).	option	-
	Option Description enable Enable IPv6CP. disable Disable IPv6CP.
device	Name for the physical interface.	string	Maximum length: 15
username	User name.	string	Maximum length: 64
password	Enter the password.	password	Not Specified
auth-type	PPP authentication type to use.	option	-
	Option Description auto Automatically choose the authentication method. pap PAP authentication. chap CHAP authentication. mschapv1 MS-CHAPv1 authentication. mschapv2 MS-CHAPv2 authentication.
ipunnumbered	PPPoE unnumbered IP.	ipv4-address	Not Specified
pppoe-unnumbered-negotiate	Enable/disable PPPoE unnumbered negotiation.	option	-
	Option Description enable Enable PPPoE unnumbered negotiation. disable Disable PPPoE unnumbered negotiation.
idle-timeout	PPPoE auto disconnect after idle timeout .	integer	Minimum value: 0 Maximum value: 4294967295
disc-retry-timeout	PPPoE discovery init timeout value in .	integer	Minimum value: 0 Maximum value: 4294967295
padt-retry-timeout	PPPoE terminate timeout value in .	integer	Minimum value: 0 Maximum value: 4294967295
service-name	PPPoE service name.	string	Maximum length: 63
ac-name	PPPoE AC name.	string	Maximum length: 63
lcp-echo-interval	Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.	integer	Minimum value: 0 Maximum value: 32767
lcp-max-echo-fails	Maximum missed LCP echo messages before disconnect.	integer	Minimum value: 0 Maximum value: 32767