config wireless-controller snmp

Configure SNMP.

config wireless-controller snmp

Description: Configure SNMP.

set engine-id {string}

set contact-info {string}

set trap-high-cpu-threshold {integer}

set trap-high-mem-threshold {integer}

config community

Description: SNMP Community Configuration.

edit <id>

set name {string}

set status [enable|disable]

set query-v1-status [enable|disable]

set query-v2c-status [enable|disable]

set trap-v1-status [enable|disable]

set trap-v2c-status [enable|disable]

config hosts

Description: Configure IPv4 SNMP managers (hosts).

edit <id>

set ip {user}

next

end

next

end

config user

Description: SNMP User Configuration.

edit <name>

set status [enable|disable]

set queries [enable|disable]

set trap-status [enable|disable]

set security-level [no-auth-no-priv|auth-no-priv|...]

set auth-proto [md5|sha]

set auth-pwd {password}

set priv-proto [aes|des|...]

set priv-pwd {password}

set notify-hosts {ipv4-address}

next

end

end

config wireless-controller snmp

Parameter	Description	Type	Size
engine-id	AC SNMP engineId string (maximum 24 characters).	string	Not Specified
contact-info	Contact Information.	string	Not Specified
trap-high-cpu-threshold	CPU usage when trap is sent.	integer	Minimum value: 10 Maximum value: 100
trap-high-mem-threshold	Memory usage when trap is sent.	integer	Minimum value: 10 Maximum value: 100

config community

Parameter	Description	Type	Size
name	Community name.	string	Not Specified
status	Enable/disable this SNMP community.	option	-
	Option Description enable Enable setting. disable Disable setting.
query-v1-status	Enable/disable SNMP v1 queries.	option	-
	Option Description enable Enable setting. disable Disable setting.
query-v2c-status	Enable/disable SNMP v2c queries.	option	-
	Option Description enable Enable setting. disable Disable setting.
trap-v1-status	Enable/disable SNMP v1 traps.	option	-
	Option Description enable Enable setting. disable Disable setting.
trap-v2c-status	Enable/disable SNMP v2c traps.	option	-
	Option Description enable Enable setting. disable Disable setting.

config hosts

Parameter	Description	Type	Size
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

config user

Parameter	Description	Type	Size
status	SNMP User Enable	option	-
	Option Description enable Enable setting. disable Disable setting.
queries	Enable/disable SNMP queries for this user.	option	-
	Option Description enable Enable setting. disable Disable setting.
trap-status	Enable/disable traps for this SNMP user.	option	-
	Option Description enable Enable setting. disable Disable setting.
security-level	Security level for message authentication and encryption.	option	-
	Option Description no-auth-no-priv Message with no authentication and no privacy (encryption). auth-no-priv Message with authentication but no privacy (encryption). auth-priv Message with authentication and privacy (encryption).
auth-proto	Authentication protocol.	option	-
	Option Description md5 HMAC-MD5-96 authentication protocol. sha HMAC-SHA-96 authentication protocol.
auth-pwd	Password for authentication protocol.	password	Not Specified
priv-proto	Privacy (encryption) protocol.	option	-
	Option Description aes CFB128-AES-128 symmetric encryption protocol. des CBC-DES symmetric encryption protocol. aes256 CFB128-AES-256 symmetric encryption protocol. aes256cisco CFB128-AES-256 symmetric encryption protocol compatible with CISCO.
priv-pwd	Password for privacy (encryption) protocol.	password	Not Specified
notify-hosts	Configure SNMP User Notify Hosts.	ipv4-address	Not Specified