config router multicast6
Configure IPv6 multicast.
config router multicast6
Description: Configure IPv6 multicast.
set multicast-routing [enable|disable]
set multicast-pmtu [enable|disable]
config interface
Description: Protocol Independent Multicast (PIM) interfaces.
edit <name>
set hello-interval {integer}
set hello-holdtime {integer}
next
end
config pim-sm-global
Description: PIM sparse-mode global settings.
set register-rate-limit {integer}
config rp-address
Description: Statically configured RP addresses.
edit <id>
set ip6-address {ipv6-address}
next
end
end
end
config router multicast6
Parameter |
Description |
Type |
Size |
|||||||
---|---|---|---|---|---|---|---|---|---|---|
multicast-routing |
Enable/disable IPv6 multicast routing. |
option |
- |
|||||||
|
|
|||||||||
multicast-pmtu |
Enable/disable PMTU for IPv6 multicast. |
option |
- |
|||||||
|
|
config interface
Parameter |
Description |
Type |
Size |
---|---|---|---|
hello-interval |
Interval between sending PIM hello messages .. |
integer |
Minimum value: 1 Maximum value: 65535 |
hello-holdtime |
Time before old neighbour information expires . |
integer |
Minimum value: 1 Maximum value: 65535 |
config pim-sm-global
Parameter |
Description |
Type |
Size |
---|---|---|---|
register-rate-limit |
Limit of packets/sec per source registered through this RP (0 means unlimited). |
integer |
Minimum value: 0 Maximum value: 65535 |
config rp-address
Parameter |
Description |
Type |
Size |
---|---|---|---|
ip6-address |
RP router IPv6 address. |
ipv6-address |
Not Specified |