config firewall multicast-policy6
Configure IPv6 multicast NAT policies.
config firewall multicast-policy6
Description: Configure IPv6 multicast NAT policies.
edit <id>
set action [accept|deny]
set auto-asic-offload [enable|disable]
set dstaddr <name1>, <name2>, ...
set dstintf {string}
set end-port {integer}
set logtraffic [enable|disable]
set protocol {integer}
set srcaddr <name1>, <name2>, ...
set srcintf {string}
set start-port {integer}
set status [enable|disable]
next
end
config firewall multicast-policy6
|
Parameter |
Description |
Type |
Size |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
action |
Accept or deny traffic matching the policy. |
option |
- |
|||||||
|
|
|
|||||||||
|
auto-asic-offload * |
Enable/disable offloading policy traffic for hardware acceleration. |
option |
- |
|||||||
|
|
|
|||||||||
|
dstaddr |
IPv6 destination address name. Address name. |
string |
Maximum length: 79 |
|||||||
|
dstintf |
IPv6 destination interface name. |
string |
Maximum length: 35 |
|||||||
|
end-port |
Integer value for ending TCP/UDP/SCTP destination port in range. |
integer |
Minimum value: 0 Maximum value: 65535 |
|||||||
|
id |
Policy ID. |
integer |
Minimum value: 0 Maximum value: 4294967294 |
|||||||
|
logtraffic |
Enable/disable logging traffic accepted by this policy. |
option |
- |
|||||||
|
|
|
|||||||||
|
protocol |
Integer value for the protocol type as defined by IANA. |
integer |
Minimum value: 0 Maximum value: 255 |
|||||||
|
srcaddr |
IPv6 source address name. Address name. |
string |
Maximum length: 79 |
|||||||
|
srcintf |
IPv6 source interface name. |
string |
Maximum length: 35 |
|||||||
|
start-port |
Integer value for starting TCP/UDP/SCTP destination port in range. |
integer |
Minimum value: 0 Maximum value: 65535 |
|||||||
|
status |
Enable/disable this policy. |
option |
- |
|||||||
|
|
|
|||||||||
* This parameter may not exist in some models.