config system npu

This command is available for model(s): FortiGate 1000D, FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 140E-POE, FortiGate 140E, FortiGate 1500DT, FortiGate 1500D, FortiGate 2000E, FortiGate 200E, FortiGate 201E, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 3000D, FortiGate 300D, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3810D, FortiGate 3815D, FortiGate 3960E, FortiGate 3980E, FortiGate 400D, FortiGate 400E Bypass, FortiGate 400E, FortiGate 401E, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 5001D, FortiGate 5001E1, FortiGate 5001E, FortiGate 500D, FortiGate 500E, FortiGate 501E, FortiGate 600D, FortiGate 600E, FortiGate 601E, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R.

It is not available for: FortiGate 100D, FortiGate 140D-POE, FortiGate 140D, FortiGate 30E 3G4G GBL, FortiGate 30E 3G4G INTL, FortiGate 30E 3G4G NAM, FortiGate 30E, FortiGate 50E, FortiGate 51E, FortiGate 52E, FortiGate 90E, FortiGate 91E, FortiGate 92D, FortiGate VM64, FortiGateRugged 30D, FortiGateRugged 90D, FortiWiFi 30E 3G4G INTL, FortiWiFi 30E 3G4G NAM, FortiWiFi 30E, FortiWiFi 50E 2R, FortiWiFi 50E, FortiWiFi 51E.

Configure NPU attributes.

config system npu
    Description: Configure NPU attributes.
    set capwap-offload [enable|disable]
    set dedicated-management-cpu [enable|disable]
    set fastpath [disable|enable]
    config fp-anomaly
        Description: NP6Lite anomaly protection (packet drop or send trap to host).
        set ipv4-ver-err [drop|trap-to-host]
        set ipv4-ihl-err [drop|trap-to-host]
        set ipv4-len-err [drop|trap-to-host]
        set ipv4-ttlzero-err [drop|trap-to-host]
        set ipv4-csum-err [drop|trap-to-host]
        set ipv4-opt-err [drop|trap-to-host]
        set tcp-hlen-err [drop|trap-to-host]
        set tcp-plen-err [drop|trap-to-host]
        set tcp-csum-err [drop|trap-to-host]
        set udp-plen-err [drop|trap-to-host]
        set udp-hlen-err [drop|trap-to-host]
        set udp-csum-err [drop|trap-to-host]
        set udp-len-err [drop|trap-to-host]
        set udplite-cover-err [drop|trap-to-host]
        set udplite-csum-err [drop|trap-to-host]
        set icmp-minlen-err [drop|trap-to-host]
        set icmp-csum-err [drop|trap-to-host]
        set esp-minlen-err [drop|trap-to-host]
        set unknproto-minlen-err [drop|trap-to-host]
        set ipv6-ver-err [drop|trap-to-host]
        set ipv6-ihl-err [drop|trap-to-host]
        set ipv6-plen-zero [drop|trap-to-host]
        set ipv6-exthdr-order-err [drop|trap-to-host]
        set ipv6-exthdr-len-err [drop|trap-to-host]
    end
    set gtp-enhanced-cpu-range [0|1|...]
    set gtp-enhanced-mode [enable|disable]
    set host-shortcut-mode [bi-directional|host-shortcut]
    set htx-gtse-quota [100Mbps|200Mbps|...]
    set iph-rsvd-re-cksum [enable|disable]
    set ipsec-dec-subengine-mask {user}
    set ipsec-enc-subengine-mask {user}
    set ipsec-inbound-cache [enable|disable]
    set ipsec-mtu-override [disable|enable]
    set ipsec-over-vlink [enable|disable]
    config isf-np-queues
        Description: Configure queues of switch port connected to NP6 XAUI on ingress path.
        set cos0 {string}
        set cos1 {string}
        set cos2 {string}
        set cos3 {string}
        set cos4 {string}
        set cos5 {string}
        set cos6 {string}
        set cos7 {string}
    end
    set lag-out-port-select [disable|enable]
    set mcast-session-accounting [tpe-based|session-based|...]
    set np6-cps-optimization-mode [enable|disable]
    set per-session-accounting [disable|traffic-log-only|...]
    config port-cpu-map
        Description: Configure NPU interface to CPU core mapping.
        edit <interface>
            set cpu-core {string}
        next
    end
    config port-npu-map
        Description: Configure port to NPU group mapping.
        edit <interface>
            set npu-group-index {integer}
        next
    end
    config priority-protocol
        Description: Configure NPU priority protocol.
        set bgp [enable|disable]
        set slbc [enable|disable]
        set bfd [enable|disable]
    end
    set qos-mode [disable|priority|...]
    set rdp-offload [enable|disable]
    set recover-np6-link [enable|disable]
    set sse-backpressure [enable|disable]
    set strip-clear-text-padding [enable|disable]
    set strip-esp-padding [enable|disable]
    set sw-np-bandwidth [0G|2G|...]
    set switch-np-hash [src-ip|dst-ip|...]
    set uesp-offload [enable|disable]
end

config system npu

Parameter

Description

Type

Size

capwap-offload *

Enable/disable offloading managed FortiAP and FortiLink CAPWAP sessions.

option

Option	Description
enable	Enable CAPWAP offload.
disable	Disable CAPWAP offload.

dedicated-management-cpu *

Enable to dedicate one CPU for GUI and CLI connections when NPs are busy.

option

Option	Description
enable	Enable dedication of CPU #0 for management tasks.
disable	Disable dedication of CPU #0 for management tasks.

fastpath *

Enable/disable NP6 offloading (also called fast path).

option

Option	Description
disable	Disable NP6 offloading (fast path).
enable	Enable NP6 offloading (fast path).

gtp-enhanced-cpu-range *

GTP enhanced CPU range option.

option

Option	Description
0	Inspect GTPU packets by all CPUs.
1	Inspect GTPU packets by Master CPUs.
2	Inspect GTPU packets by Slave CPUs.

gtp-enhanced-mode *

Enable/disable GTP enhanced mode.

option

Option	Description
enable	Enable GTP enhanced mode.
disable	Disable GTP enhanced mode.

host-shortcut-mode *

Set np6 host shortcut mode.

option

Option	Description
bi-directional	Offload TCP and IP Tunnel sessions in both directions between 10G and 1G interfaces (normal operation).
host-shortcut	Only offload TCP and IP Tunnel sessions received by 1G interfaces. Select if packets are dropped for offloaded traffic between 10G to 1G interfaces.

htx-gtse-quota *

Configure HTX GTSE quota.

option

Option	Description
100Mbps	100Mbps.
200Mbps	200Mbps.
300Mbps	300Mbps.
400Mbps	400Mbps.
500Mbps	500Mbps.
600Mbps	600Mbps.
700Mbps	700Mbps.
800Mbps	800Mbps.
900Mbps	900Mbps.
1Gbps	1Gbps.
2Gbps	2Gbps.
4Gbps	4Gbps.
8Gbps	8Gbps.
10Gbps	10Gbps.

iph-rsvd-re-cksum *

Enable/disable IP checksum re-calculation for packets with iph.reserved bit set.

option

Option	Description
enable	Enable IP checksum re-calculation for packets with iph.reserved bit set.
disable	Disable IP checksum re-calculation for packets with iph.reserved bit set.

ipsec-dec-subengine-mask *

IPsec decryption subengine mask.

user

Not Specified

ipsec-enc-subengine-mask *

IPsec encryption subengine mask.

user

Not Specified

ipsec-inbound-cache *

Enable/disable IPsec inbound cache for anti-replay.

option

Option	Description
enable	Enable inbound cache always.
disable	Disable inbound cache when IPsec anti-replay is on.

ipsec-mtu-override *

Enable/disable NP6 IPsec MTU override.

option

Option	Description
disable	Disable NP6 IPsec MTU override.
enable	Enable NP6 IPsec MTU override.

ipsec-over-vlink *

Enable/disable IPSEC over vlink.

option

Option	Description
enable	Enable IPSEC over vlink.
disable	Disable IPSEC over vlink.

lag-out-port-select *

Enable/disable LAG outgoing port selection based on incoming traffic port.

option

Option	Description
disable	Disable LAG outgoing port selection based on incoming traffic port.
enable	Enable LAG outgoing port selection based on incoming traffic port.

mcast-session-accounting *

Enable/disable traffic accounting for each multicast session through TAE counter.

option

Option	Description
tpe-based	Enable TPE-based multicast session accounting.
session-based	Enable session-based multicast session accounting.
disable	Disable multicast session accounting.

np6-cps-optimization-mode *

Enable/disable NP6 connection per second (CPS) optimization mode.

option

Option	Description
enable	Enable NP6 connection per second (CPS) optimization mode.
disable	Disable NP6 connection per second (CPS) optimization mode.

per-session-accounting *

Enable/disable per-session accounting.

option

Option	Description
disable	Disable per-session accounting.
traffic-log-only	Per-session accounting only for sessions with traffic logging enabled in firewall policy.
enable	Per-session accounting for all sessions.

qos-mode *

QoS mode on switch and NP.

option

Option	Description
disable	Disable QoS on switch and NP.
priority	Priority based.
round-robin	Round Robin Scheduler.

rdp-offload *

Enable/disable rdp offload.

option

Option	Description
enable	Enable reliable datagram protocol traffic offload.
disable	Disable reliable datagram protocol traffic offload.

recover-np6-link *

Enable/disable internal link failure check and recovery after boot up.

option

Option	Description
enable	Enable internal link failure check and recovery after boot up.
disable	Disable internal link failure check and recovery after boot up.

sse-backpressure *

Enable/disable sse backpressure.

option

Option	Description
enable	Enable sse backpressureg.
disable	Disable sse backpressureg.

strip-clear-text-padding *

Enable/disable stripping clear text padding.

option

Option	Description
enable	Enable stripping clear text padding.
disable	Disable stripping clear text padding.

strip-esp-padding *

Enable/disable stripping ESP padding.

option

Option	Description
enable	Enable stripping ESP padding.
disable	Disable stripping ESP padding.

sw-np-bandwidth *

Bandwidth from switch to NP.

option

Option	Description
0G	Default value. No bandwidth control.
2G	2Gbps.
4G	4Gbps.
5G	5Gbps.
6G	6Gbps.

switch-np-hash *

Switch-NP trunk port selection Criteria.

option

Option	Description
src-ip	Source IP address.
dst-ip	Destination IP address.
src-dst-ip	Source+dest IP address.

uesp-offload *

Enable/disable UDP-encapsulated ESP offload.

option

Option	Description
enable	Enable UDP-encapsulated ESP traffic offload.
disable	Disable UDP-encapsulated ESP traffic offload.

* This parameter may not exist in some models.

config fp-anomaly

Parameter

Description

Type

Size

ipv4-ver-err

Invalid IPv4 header version anomalies.

option

Option	Description
drop	Drop IPv4 invalid header version.
trap-to-host	Forward IPv4 invalid header version to main CPU for processing.

ipv4-ihl-err

Invalid IPv4 header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid header length.
trap-to-host	Forward IPv4 invalid header length to main CPU for processing.

ipv4-len-err

Invalid IPv4 packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid packet length.
trap-to-host	Forward IPv4 invalid packet length to main CPU for processing.

ipv4-ttlzero-err

Invalid IPv4 TTL field zero anomalies.

option

Option	Description
drop	Drop IPv4 invalid TTL field zero.
trap-to-host	Forward IPv4 invalid TTL field zero to main CPU for processing.

ipv4-csum-err

Invalid IPv4 packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid L3 checksum.
trap-to-host	Forward IPv4 invalid L3 checksum to main CPU for processing.

ipv4-opt-err

Invalid IPv4 option parsing anomalies.

option

Option	Description
drop	Drop IPv4 invalid option parsing.
trap-to-host	Forward IPv4 invalid option parsing to main CPU for processing.

tcp-hlen-err

Invalid IPv4 TCP header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet header length.
trap-to-host	Forward IPv4 invalid TCP packet header length to main CPU for processing.

tcp-plen-err

Invalid IPv4 TCP packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet length.
trap-to-host	Forward IPv4 invalid TCP packet length to main CPU for processing.

tcp-csum-err

Invalid IPv4 TCP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet checksum.
trap-to-host	Forward IPv4 invalid TCP packet checksum to main CPU for processing.

udp-plen-err

Invalid IPv4 UDP packet minimum length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet minimum length.
trap-to-host	Forward IPv4 invalid UDP packet minimum length to main CPU for processing.

udp-hlen-err

Invalid IPv4 UDP packet header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP header length.
trap-to-host	Forward IPv4 invalid UDP header length to main CPU for processing.

udp-csum-err

Invalid IPv4 UDP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet checksum.
trap-to-host	Forward IPv4 invalid UDP packet checksum to main CPU for processing.

udp-len-err

Invalid IPv4 UDP packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet length.
trap-to-host	Forward IPv4 invalid UDP packet length to main CPU for processing.

udplite-cover-err

Invalid IPv4 UDP-Lite packet coverage anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP-Lite packet coverage.
trap-to-host	Forward IPv4 invalid UDP-Lite packet coverage to main CPU for processing.

udplite-csum-err

Invalid IPv4 UDP-Lite packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP-Lite packet checksum.
trap-to-host	Forward IPv4 invalid UDP-Lite packet checksum to main CPU for processing.

icmp-minlen-err

Invalid IPv4 ICMP short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid ICMP short packet.
trap-to-host	Forward IPv4 invalid ICMP short packet to main CPU for processing.

icmp-csum-err

Invalid IPv4 ICMP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid ICMP checksum.
trap-to-host	Forward IPv4 invalid ICMP checksum to main CPU for processing.

esp-minlen-err

Invalid IPv4 ESP short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid ESP short packet.
trap-to-host	Forward IPv4 invalid ESP short packet to main CPU for processing.

unknproto-minlen-err

Invalid IPv4 L4 unknown protocol short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid L4 unknown protocol short packet.
trap-to-host	Forward IPv4 invalid L4 unknown protocol short packet to main CPU for processing.

ipv6-ver-err

Invalid IPv6 packet version anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet version.
trap-to-host	Forward IPv6 with invalid packet version to FortiOS.

ipv6-ihl-err

Invalid IPv6 packet length anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet length.
trap-to-host	Forward IPv6 with invalid packet length to FortiOS.

ipv6-plen-zero

Invalid IPv6 packet payload length zero anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet payload length zero.
trap-to-host	Forward IPv6 with invalid packet payload length zero to FortiOS.

ipv6-exthdr-order-err

Invalid IPv6 packet extension header ordering anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet extension header ordering.
trap-to-host	Forward IPv6 with invalid packet extension header ordering to FortiOS.

ipv6-exthdr-len-err

Invalid IPv6 packet chain extension header total length anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet chain extension header total length.
trap-to-host	Forward IPv6 with invalid packet chain extension header total length to FortiOS.

config isf-np-queues

Parameter	Description	Type	Size
cos0	CoS profile name for CoS 0.	string	Maximum length: 35
cos1	CoS profile name for CoS 1.	string	Maximum length: 35
cos2	CoS profile name for CoS 2.	string	Maximum length: 35
cos3	CoS profile name for CoS 3.	string	Maximum length: 35
cos4	CoS profile name for CoS 4.	string	Maximum length: 35
cos5	CoS profile name for CoS 5.	string	Maximum length: 35
cos6	CoS profile name for CoS 6.	string	Maximum length: 35
cos7	CoS profile name for CoS 7.	string	Maximum length: 35

config port-cpu-map

Parameter	Description	Type	Size
interface	The interface to map to a CPU core.	string	Maximum length: 15
cpu-core	The CPU core to map to an interface.	string	Maximum length: 31

config port-npu-map

Parameter	Description	Type	Size
interface	Set npu interface port to NPU group map.	string	Maximum length: 15
npu-group-index	Mapping NPU group index.	integer	Minimum value: 0 Maximum value: 4294967295

config priority-protocol

Parameter

Description

Type

Size

bgp

Enable/disable NPU BGP priority protocol.

option

Option	Description
enable	Enable NPU BGP priority protocol.
disable	Disable NPU BGP priority protocol.

slbc

Enable/disable NPU SLBC priority protocol.

option

Option	Description
enable	Enable NPU SLBC priority protocol.
disable	Disable NPU SLBC priority protocol.

bfd

Enable/disable NPU BFD priority protocol.

option

Option	Description
enable	Enable NPU BFD priority protocol.
disable	Disable NPU BFD priority protocol.

config system npu

Configure NPU attributes.

config system npu
    Description: Configure NPU attributes.
    set capwap-offload [enable|disable]
    set dedicated-management-cpu [enable|disable]
    set fastpath [disable|enable]
    config fp-anomaly
        Description: NP6Lite anomaly protection (packet drop or send trap to host).
        set ipv4-ver-err [drop|trap-to-host]
        set ipv4-ihl-err [drop|trap-to-host]
        set ipv4-len-err [drop|trap-to-host]
        set ipv4-ttlzero-err [drop|trap-to-host]
        set ipv4-csum-err [drop|trap-to-host]
        set ipv4-opt-err [drop|trap-to-host]
        set tcp-hlen-err [drop|trap-to-host]
        set tcp-plen-err [drop|trap-to-host]
        set tcp-csum-err [drop|trap-to-host]
        set udp-plen-err [drop|trap-to-host]
        set udp-hlen-err [drop|trap-to-host]
        set udp-csum-err [drop|trap-to-host]
        set udp-len-err [drop|trap-to-host]
        set udplite-cover-err [drop|trap-to-host]
        set udplite-csum-err [drop|trap-to-host]
        set icmp-minlen-err [drop|trap-to-host]
        set icmp-csum-err [drop|trap-to-host]
        set esp-minlen-err [drop|trap-to-host]
        set unknproto-minlen-err [drop|trap-to-host]
        set ipv6-ver-err [drop|trap-to-host]
        set ipv6-ihl-err [drop|trap-to-host]
        set ipv6-plen-zero [drop|trap-to-host]
        set ipv6-exthdr-order-err [drop|trap-to-host]
        set ipv6-exthdr-len-err [drop|trap-to-host]
    end
    set gtp-enhanced-cpu-range [0|1|...]
    set gtp-enhanced-mode [enable|disable]
    set host-shortcut-mode [bi-directional|host-shortcut]
    set htx-gtse-quota [100Mbps|200Mbps|...]
    set iph-rsvd-re-cksum [enable|disable]
    set ipsec-dec-subengine-mask {user}
    set ipsec-enc-subengine-mask {user}
    set ipsec-inbound-cache [enable|disable]
    set ipsec-mtu-override [disable|enable]
    set ipsec-over-vlink [enable|disable]
    config isf-np-queues
        Description: Configure queues of switch port connected to NP6 XAUI on ingress path.
        set cos0 {string}
        set cos1 {string}
        set cos2 {string}
        set cos3 {string}
        set cos4 {string}
        set cos5 {string}
        set cos6 {string}
        set cos7 {string}
    end
    set lag-out-port-select [disable|enable]
    set mcast-session-accounting [tpe-based|session-based|...]
    set np6-cps-optimization-mode [enable|disable]
    set per-session-accounting [disable|traffic-log-only|...]
    config port-cpu-map
        Description: Configure NPU interface to CPU core mapping.
        edit <interface>
            set cpu-core {string}
        next
    end
    config port-npu-map
        Description: Configure port to NPU group mapping.
        edit <interface>
            set npu-group-index {integer}
        next
    end
    config priority-protocol
        Description: Configure NPU priority protocol.
        set bgp [enable|disable]
        set slbc [enable|disable]
        set bfd [enable|disable]
    end
    set qos-mode [disable|priority|...]
    set rdp-offload [enable|disable]
    set recover-np6-link [enable|disable]
    set sse-backpressure [enable|disable]
    set strip-clear-text-padding [enable|disable]
    set strip-esp-padding [enable|disable]
    set sw-np-bandwidth [0G|2G|...]
    set switch-np-hash [src-ip|dst-ip|...]
    set uesp-offload [enable|disable]
end

config system npu

Parameter

Description

Type

Size

capwap-offload *

Enable/disable offloading managed FortiAP and FortiLink CAPWAP sessions.

option

Option	Description
enable	Enable CAPWAP offload.
disable	Disable CAPWAP offload.

dedicated-management-cpu *

Enable to dedicate one CPU for GUI and CLI connections when NPs are busy.

option

Option	Description
enable	Enable dedication of CPU #0 for management tasks.
disable	Disable dedication of CPU #0 for management tasks.

fastpath *

Enable/disable NP6 offloading (also called fast path).

option

Option	Description
disable	Disable NP6 offloading (fast path).
enable	Enable NP6 offloading (fast path).

gtp-enhanced-cpu-range *

GTP enhanced CPU range option.

option

Option	Description
0	Inspect GTPU packets by all CPUs.
1	Inspect GTPU packets by Master CPUs.
2	Inspect GTPU packets by Slave CPUs.

gtp-enhanced-mode *

Enable/disable GTP enhanced mode.

option

Option	Description
enable	Enable GTP enhanced mode.
disable	Disable GTP enhanced mode.

host-shortcut-mode *

Set np6 host shortcut mode.

option

Option	Description
bi-directional	Offload TCP and IP Tunnel sessions in both directions between 10G and 1G interfaces (normal operation).
host-shortcut	Only offload TCP and IP Tunnel sessions received by 1G interfaces. Select if packets are dropped for offloaded traffic between 10G to 1G interfaces.

htx-gtse-quota *

Configure HTX GTSE quota.

option

Option	Description
100Mbps	100Mbps.
200Mbps	200Mbps.
300Mbps	300Mbps.
400Mbps	400Mbps.
500Mbps	500Mbps.
600Mbps	600Mbps.
700Mbps	700Mbps.
800Mbps	800Mbps.
900Mbps	900Mbps.
1Gbps	1Gbps.
2Gbps	2Gbps.
4Gbps	4Gbps.
8Gbps	8Gbps.
10Gbps	10Gbps.

iph-rsvd-re-cksum *

Enable/disable IP checksum re-calculation for packets with iph.reserved bit set.

option

Option	Description
enable	Enable IP checksum re-calculation for packets with iph.reserved bit set.
disable	Disable IP checksum re-calculation for packets with iph.reserved bit set.

ipsec-dec-subengine-mask *

IPsec decryption subengine mask.

user

Not Specified

ipsec-enc-subengine-mask *

IPsec encryption subengine mask.

user

Not Specified

ipsec-inbound-cache *

Enable/disable IPsec inbound cache for anti-replay.

option

Option	Description
enable	Enable inbound cache always.
disable	Disable inbound cache when IPsec anti-replay is on.

ipsec-mtu-override *

Enable/disable NP6 IPsec MTU override.

option

Option	Description
disable	Disable NP6 IPsec MTU override.
enable	Enable NP6 IPsec MTU override.

ipsec-over-vlink *

Enable/disable IPSEC over vlink.

option

Option	Description
enable	Enable IPSEC over vlink.
disable	Disable IPSEC over vlink.

lag-out-port-select *

Enable/disable LAG outgoing port selection based on incoming traffic port.

option

Option	Description
disable	Disable LAG outgoing port selection based on incoming traffic port.
enable	Enable LAG outgoing port selection based on incoming traffic port.

mcast-session-accounting *

Enable/disable traffic accounting for each multicast session through TAE counter.

option

Option	Description
tpe-based	Enable TPE-based multicast session accounting.
session-based	Enable session-based multicast session accounting.
disable	Disable multicast session accounting.

np6-cps-optimization-mode *

Enable/disable NP6 connection per second (CPS) optimization mode.

option

Option	Description
enable	Enable NP6 connection per second (CPS) optimization mode.
disable	Disable NP6 connection per second (CPS) optimization mode.

per-session-accounting *

Enable/disable per-session accounting.

option

Option	Description
disable	Disable per-session accounting.
traffic-log-only	Per-session accounting only for sessions with traffic logging enabled in firewall policy.
enable	Per-session accounting for all sessions.

qos-mode *

QoS mode on switch and NP.

option

Option	Description
disable	Disable QoS on switch and NP.
priority	Priority based.
round-robin	Round Robin Scheduler.

rdp-offload *

Enable/disable rdp offload.

option

Option	Description
enable	Enable reliable datagram protocol traffic offload.
disable	Disable reliable datagram protocol traffic offload.

recover-np6-link *

Enable/disable internal link failure check and recovery after boot up.

option

Option	Description
enable	Enable internal link failure check and recovery after boot up.
disable	Disable internal link failure check and recovery after boot up.

sse-backpressure *

Enable/disable sse backpressure.

option

Option	Description
enable	Enable sse backpressureg.
disable	Disable sse backpressureg.

strip-clear-text-padding *

Enable/disable stripping clear text padding.

option

Option	Description
enable	Enable stripping clear text padding.
disable	Disable stripping clear text padding.

strip-esp-padding *

Enable/disable stripping ESP padding.

option

Option	Description
enable	Enable stripping ESP padding.
disable	Disable stripping ESP padding.

sw-np-bandwidth *

Bandwidth from switch to NP.

option

Option	Description
0G	Default value. No bandwidth control.
2G	2Gbps.
4G	4Gbps.
5G	5Gbps.
6G	6Gbps.

switch-np-hash *

Switch-NP trunk port selection Criteria.

option

Option	Description
src-ip	Source IP address.
dst-ip	Destination IP address.
src-dst-ip	Source+dest IP address.

uesp-offload *

Enable/disable UDP-encapsulated ESP offload.

option

Option	Description
enable	Enable UDP-encapsulated ESP traffic offload.
disable	Disable UDP-encapsulated ESP traffic offload.

* This parameter may not exist in some models.

config fp-anomaly

Parameter

Description

Type

Size

ipv4-ver-err

Invalid IPv4 header version anomalies.

option

Option	Description
drop	Drop IPv4 invalid header version.
trap-to-host	Forward IPv4 invalid header version to main CPU for processing.

ipv4-ihl-err

Invalid IPv4 header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid header length.
trap-to-host	Forward IPv4 invalid header length to main CPU for processing.

ipv4-len-err

Invalid IPv4 packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid packet length.
trap-to-host	Forward IPv4 invalid packet length to main CPU for processing.

ipv4-ttlzero-err

Invalid IPv4 TTL field zero anomalies.

option

Option	Description
drop	Drop IPv4 invalid TTL field zero.
trap-to-host	Forward IPv4 invalid TTL field zero to main CPU for processing.

ipv4-csum-err

Invalid IPv4 packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid L3 checksum.
trap-to-host	Forward IPv4 invalid L3 checksum to main CPU for processing.

ipv4-opt-err

Invalid IPv4 option parsing anomalies.

option

Option	Description
drop	Drop IPv4 invalid option parsing.
trap-to-host	Forward IPv4 invalid option parsing to main CPU for processing.

tcp-hlen-err

Invalid IPv4 TCP header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet header length.
trap-to-host	Forward IPv4 invalid TCP packet header length to main CPU for processing.

tcp-plen-err

Invalid IPv4 TCP packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet length.
trap-to-host	Forward IPv4 invalid TCP packet length to main CPU for processing.

tcp-csum-err

Invalid IPv4 TCP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid TCP packet checksum.
trap-to-host	Forward IPv4 invalid TCP packet checksum to main CPU for processing.

udp-plen-err

Invalid IPv4 UDP packet minimum length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet minimum length.
trap-to-host	Forward IPv4 invalid UDP packet minimum length to main CPU for processing.

udp-hlen-err

Invalid IPv4 UDP packet header length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP header length.
trap-to-host	Forward IPv4 invalid UDP header length to main CPU for processing.

udp-csum-err

Invalid IPv4 UDP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet checksum.
trap-to-host	Forward IPv4 invalid UDP packet checksum to main CPU for processing.

udp-len-err

Invalid IPv4 UDP packet length anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP packet length.
trap-to-host	Forward IPv4 invalid UDP packet length to main CPU for processing.

udplite-cover-err

Invalid IPv4 UDP-Lite packet coverage anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP-Lite packet coverage.
trap-to-host	Forward IPv4 invalid UDP-Lite packet coverage to main CPU for processing.

udplite-csum-err

Invalid IPv4 UDP-Lite packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid UDP-Lite packet checksum.
trap-to-host	Forward IPv4 invalid UDP-Lite packet checksum to main CPU for processing.

icmp-minlen-err

Invalid IPv4 ICMP short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid ICMP short packet.
trap-to-host	Forward IPv4 invalid ICMP short packet to main CPU for processing.

icmp-csum-err

Invalid IPv4 ICMP packet checksum anomalies.

option

Option	Description
drop	Drop IPv4 invalid ICMP checksum.
trap-to-host	Forward IPv4 invalid ICMP checksum to main CPU for processing.

esp-minlen-err

Invalid IPv4 ESP short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid ESP short packet.
trap-to-host	Forward IPv4 invalid ESP short packet to main CPU for processing.

unknproto-minlen-err

Invalid IPv4 L4 unknown protocol short packet anomalies.

option

Option	Description
drop	Drop IPv4 invalid L4 unknown protocol short packet.
trap-to-host	Forward IPv4 invalid L4 unknown protocol short packet to main CPU for processing.

ipv6-ver-err

Invalid IPv6 packet version anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet version.
trap-to-host	Forward IPv6 with invalid packet version to FortiOS.

ipv6-ihl-err

Invalid IPv6 packet length anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet length.
trap-to-host	Forward IPv6 with invalid packet length to FortiOS.

ipv6-plen-zero

Invalid IPv6 packet payload length zero anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet payload length zero.
trap-to-host	Forward IPv6 with invalid packet payload length zero to FortiOS.

ipv6-exthdr-order-err

Invalid IPv6 packet extension header ordering anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet extension header ordering.
trap-to-host	Forward IPv6 with invalid packet extension header ordering to FortiOS.

ipv6-exthdr-len-err

Invalid IPv6 packet chain extension header total length anomalies.

option

Option	Description
drop	Drop IPv6 with invalid packet chain extension header total length.
trap-to-host	Forward IPv6 with invalid packet chain extension header total length to FortiOS.

config isf-np-queues

Parameter	Description	Type	Size
cos0	CoS profile name for CoS 0.	string	Maximum length: 35
cos1	CoS profile name for CoS 1.	string	Maximum length: 35
cos2	CoS profile name for CoS 2.	string	Maximum length: 35
cos3	CoS profile name for CoS 3.	string	Maximum length: 35
cos4	CoS profile name for CoS 4.	string	Maximum length: 35
cos5	CoS profile name for CoS 5.	string	Maximum length: 35
cos6	CoS profile name for CoS 6.	string	Maximum length: 35
cos7	CoS profile name for CoS 7.	string	Maximum length: 35

config port-cpu-map

Parameter	Description	Type	Size
interface	The interface to map to a CPU core.	string	Maximum length: 15
cpu-core	The CPU core to map to an interface.	string	Maximum length: 31

config port-npu-map

Parameter	Description	Type	Size
interface	Set npu interface port to NPU group map.	string	Maximum length: 15
npu-group-index	Mapping NPU group index.	integer	Minimum value: 0 Maximum value: 4294967295

config priority-protocol

Parameter

Description

Type

Size

bgp

Enable/disable NPU BGP priority protocol.

option

Option	Description
enable	Enable NPU BGP priority protocol.
disable	Disable NPU BGP priority protocol.

slbc

Enable/disable NPU SLBC priority protocol.

option

Option	Description
enable	Enable NPU SLBC priority protocol.
disable	Disable NPU SLBC priority protocol.

bfd

Enable/disable NPU BFD priority protocol.

option

Option	Description
enable	Enable NPU BFD priority protocol.
disable	Disable NPU BFD priority protocol.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config system npu

config system npu

config system npu

config fp-anomaly

config isf-np-queues

config port-cpu-map

config port-npu-map

config priority-protocol

config system npu

config system npu

config system npu

config fp-anomaly

config isf-np-queues