config wireless-controller timers
Configure CAPWAP timers.
config wireless-controller timers
Description: Configure CAPWAP timers.
set ble-scan-report-intv {integer}
set client-idle-timeout {integer}
set discovery-interval {integer}
set echo-interval {integer}
set fake-ap-log {integer}
set ipsec-intf-cleanup {integer}
set radio-stats-interval {integer}
set rogue-ap-log {integer}
set sta-capability-interval {integer}
set sta-locate-timer {integer}
set sta-stats-interval {integer}
set vap-stats-interval {integer}
end
config wireless-controller timers
|
Parameter |
Description |
Type |
Size |
|---|---|---|---|
|
ble-scan-report-intv |
Time between running Bluetooth Low Energy (BLE) reports (10 - 3600 sec, default = 30). |
integer |
Minimum value: 10 Maximum value: 3600 |
|
client-idle-timeout |
Time after which a client is considered idle and times out (20 - 3600 sec, default = 300, 0 for no timeout). |
integer |
Minimum value: 20 Maximum value: 3600 |
|
discovery-interval |
Time between discovery requests (2 - 180 sec, default = 5). |
integer |
Minimum value: 2 Maximum value: 180 |
|
echo-interval |
Time between echo requests sent by the managed WTP, AP, or FortiAP (1 - 255 sec, default = 30). |
integer |
Minimum value: 1 Maximum value: 255 |
|
fake-ap-log |
Time between recording logs about fake APs if periodic fake AP logging is configured (0 - 1440 min, default = 1). |
integer |
Minimum value: 1 Maximum value: 1440 |
|
ipsec-intf-cleanup |
Time period to keep IPsec VPN interfaces up after WTP sessions are disconnected (30 - 3600 sec, default = 120). |
integer |
Minimum value: 30 Maximum value: 3600 |
|
radio-stats-interval |
Time between running radio reports (1 - 255 sec, default = 15). |
integer |
Minimum value: 1 Maximum value: 255 |
|
rogue-ap-log |
Time between logging rogue AP messages if periodic rogue AP logging is configured (0 - 1440 min, default = 0). |
integer |
Minimum value: 0 Maximum value: 1440 |
|
sta-capability-interval |
Time between running station capability reports (1 - 255 sec, default = 30). |
integer |
Minimum value: 1 Maximum value: 255 |
|
sta-locate-timer |
Time between running client presence flushes to remove clients that are listed but no longer present (0 - 86400 sec, default = 1800). |
integer |
Minimum value: 0 Maximum value: 86400 |
|
sta-stats-interval |
Time between running client (station) reports (1 - 255 sec, default = 1). |
integer |
Minimum value: 1 Maximum value: 255 |
|
vap-stats-interval |
Time between running Virtual Access Point (VAP) reports (1 - 255 sec, default = 15). |
integer |
Minimum value: 1 Maximum value: 255 |