config system snmp community
Description: SNMP community configuration.
edit <id>
set name {string}
set status [enable|disable]
config hosts
Description: Configure IPv4 SNMP managers (hosts).
edit <id>
set source-ip {ipv4-address}
set ip {user}
set ha-direct [enable|disable]
set host-type [any|query|...]
next
end
config hosts6
Description: Configure IPv6 SNMP managers.
edit <id>
set source-ipv6 {ipv6-address}
set ipv6 {ipv6-prefix}
set ha-direct [enable|disable]
set host-type [any|query|...]
next
end
set query-v1-status [enable|disable]
set query-v1-port {integer}
set query-v2c-status [enable|disable]
set query-v2c-port {integer}
set trap-v1-status [enable|disable]
set trap-v1-lport {integer}
set trap-v1-rport {integer}
set trap-v2c-status [enable|disable]
set trap-v2c-lport {integer}
set trap-v2c-rport {integer}
set events {option1}, {option2}, ...
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Community name. | string | Maximum length: 35 |
| status | Enable/disable this SNMP community. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v1-status | Enable/disable SNMP v1 queries. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v1-port | SNMP v1 query port (default = 161). | integer | Minimum value: 1 Maximum value: 65535 |
| query-v2c-status | Enable/disable SNMP v2c queries. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v2c-port | SNMP v2c query port (default = 161). | integer | Minimum value: 0 Maximum value: 65535 |
| trap-v1-status | Enable/disable SNMP v1 traps. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-v1-lport | SNMP v1 trap local port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v1-rport | SNMP v1 trap remote port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v2c-status | Enable/disable SNMP v2c traps. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-v2c-lport | SNMP v2c trap local port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v2c-rport | SNMP v2c trap remote port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| events |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| source-ip | Source IPv4 address for SNMP traps. | ipv4-address | Not Specified |
| ip | IPv4 address of the SNMP manager (host). | user | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| host-type | Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. any: Accept queries from and send traps to this SNMP manager. query: Accept queries from this SNMP manager but do not send traps. trap: Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| source-ipv6 | Source IPv6 address for SNMP traps. | ipv6-address | Not Specified |
| ipv6 | SNMP manager IPv6 address prefix. | ipv6-prefix | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| host-type | Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. any: Accept queries from and send traps to this SNMP manager. query: Accept queries from this SNMP manager but do not send traps. trap: Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager. |
option | - |
config system snmp community
Description: SNMP community configuration.
edit <id>
set name {string}
set status [enable|disable]
config hosts
Description: Configure IPv4 SNMP managers (hosts).
edit <id>
set source-ip {ipv4-address}
set ip {user}
set ha-direct [enable|disable]
set host-type [any|query|...]
next
end
config hosts6
Description: Configure IPv6 SNMP managers.
edit <id>
set source-ipv6 {ipv6-address}
set ipv6 {ipv6-prefix}
set ha-direct [enable|disable]
set host-type [any|query|...]
next
end
set query-v1-status [enable|disable]
set query-v1-port {integer}
set query-v2c-status [enable|disable]
set query-v2c-port {integer}
set trap-v1-status [enable|disable]
set trap-v1-lport {integer}
set trap-v1-rport {integer}
set trap-v2c-status [enable|disable]
set trap-v2c-lport {integer}
set trap-v2c-rport {integer}
set events {option1}, {option2}, ...
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Community name. | string | Maximum length: 35 |
| status | Enable/disable this SNMP community. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v1-status | Enable/disable SNMP v1 queries. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v1-port | SNMP v1 query port (default = 161). | integer | Minimum value: 1 Maximum value: 65535 |
| query-v2c-status | Enable/disable SNMP v2c queries. enable: Enable setting. disable: Disable setting. |
option | - |
| query-v2c-port | SNMP v2c query port (default = 161). | integer | Minimum value: 0 Maximum value: 65535 |
| trap-v1-status | Enable/disable SNMP v1 traps. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-v1-lport | SNMP v1 trap local port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v1-rport | SNMP v1 trap remote port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v2c-status | Enable/disable SNMP v2c traps. enable: Enable setting. disable: Disable setting. |
option | - |
| trap-v2c-lport | SNMP v2c trap local port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| trap-v2c-rport | SNMP v2c trap remote port (default = 162). | integer | Minimum value: 1 Maximum value: 65535 |
| events |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| source-ip | Source IPv4 address for SNMP traps. | ipv4-address | Not Specified |
| ip | IPv4 address of the SNMP manager (host). | user | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| host-type | Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. any: Accept queries from and send traps to this SNMP manager. query: Accept queries from this SNMP manager but do not send traps. trap: Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| source-ipv6 | Source IPv6 address for SNMP traps. | ipv6-address | Not Specified |
| ipv6 | SNMP manager IPv6 address prefix. | ipv6-prefix | Not Specified |
| ha-direct | Enable/disable direct management of HA cluster members. enable: Enable setting. disable: Disable setting. |
option | - |
| host-type | Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. any: Accept queries from and send traps to this SNMP manager. query: Accept queries from this SNMP manager but do not send traps. trap: Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager. |
option | - |