config switch-controller snmp-community

This command is available for model(s): FortiGate 1000D, FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 140E-POE, FortiGate 140E, FortiGate 1500DT, FortiGate 1500D, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 201E, FortiGate 201F, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 3000D, FortiGate 300D, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3401E, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3815D, FortiGate 3960E, FortiGate 3980E, FortiGate 400D, FortiGate 400E Bypass, FortiGate 400E, FortiGate 401E, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F, FortiGate 4400F, FortiGate 4401F, FortiGate 500D, FortiGate 500E, FortiGate 501E, FortiGate 600D, FortiGate 600E, FortiGate 601E, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGate 90E, FortiGate 91E, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60E DSLJ, FortiWiFi 60E DSL, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R.

It is not available for: FortiGate 5001D, FortiGate 5001E1, FortiGate 5001E.

Configure FortiSwitch SNMP v1/v2c communities globally.

config switch-controller snmp-community
    Description: Configure FortiSwitch SNMP v1/v2c communities globally.
    edit <id>
        set events {option1}, {option2}, ...
        config hosts
            Description: Configure IPv4 SNMP managers (hosts).
            edit <id>
                set ip {user}
            next
        end
        set name {string}
        set query-v1-port {integer}
        set query-v1-status [disable|enable]
        set query-v2c-port {integer}
        set query-v2c-status [disable|enable]
        set status [disable|enable]
        set trap-v1-lport {integer}
        set trap-v1-rport {integer}
        set trap-v1-status [disable|enable]
        set trap-v2c-lport {integer}
        set trap-v2c-rport {integer}
        set trap-v2c-status [disable|enable]
    next
end

config switch-controller snmp-community

Parameter

Description

Type

Size

Default

events

SNMP notifications (traps) to send.

option

cpu-high mem-low log-full intf-ip ent-conf-change

Option	Description
cpu-high	Send a trap when CPU usage too high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).

SNMP community ID.

integer

Minimum value: 0 Maximum value: 4294967295

name

SNMP community name.

string

Maximum length: 35

query-v1-port

SNMP v1 query port.

integer

Minimum value: 0 Maximum value: 65535

161

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
disable	Disable SNMP v1 queries.
enable	Enable SNMP v1 queries.

query-v2c-port

SNMP v2c query port.

integer

Minimum value: 0 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
disable	Disable SNMP v2c queries.
enable	Enable SNMP v2c queries.

status

Enable/disable this SNMP community.

option

enable

Option	Description
disable	Disable SNMP community.
enable	Enable SNMP community.

trap-v1-lport

SNMP v2c trap local port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-rport

SNMP v2c trap remote port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
disable	Disable SNMP v1 traps.
enable	Enable SNMP v1 traps.

trap-v2c-lport

SNMP v2c trap local port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
disable	Disable SNMP v2c traps.
enable	Enable SNMP v2c traps.

config hosts

Parameter	Description	Type	Size	Default
id	Host entry ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

config switch-controller snmp-community

It is not available for: FortiGate 5001D, FortiGate 5001E1, FortiGate 5001E.

Configure FortiSwitch SNMP v1/v2c communities globally.

config switch-controller snmp-community
    Description: Configure FortiSwitch SNMP v1/v2c communities globally.
    edit <id>
        set events {option1}, {option2}, ...
        config hosts
            Description: Configure IPv4 SNMP managers (hosts).
            edit <id>
                set ip {user}
            next
        end
        set name {string}
        set query-v1-port {integer}
        set query-v1-status [disable|enable]
        set query-v2c-port {integer}
        set query-v2c-status [disable|enable]
        set status [disable|enable]
        set trap-v1-lport {integer}
        set trap-v1-rport {integer}
        set trap-v1-status [disable|enable]
        set trap-v2c-lport {integer}
        set trap-v2c-rport {integer}
        set trap-v2c-status [disable|enable]
    next
end

config switch-controller snmp-community

Parameter

Description

Type

Size

Default

events

SNMP notifications (traps) to send.

option

cpu-high mem-low log-full intf-ip ent-conf-change

Option	Description
cpu-high	Send a trap when CPU usage too high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).

SNMP community ID.

integer

Minimum value: 0 Maximum value: 4294967295

name

SNMP community name.

string

Maximum length: 35

query-v1-port

SNMP v1 query port.

integer

Minimum value: 0 Maximum value: 65535

161

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
disable	Disable SNMP v1 queries.
enable	Enable SNMP v1 queries.

query-v2c-port

SNMP v2c query port.

integer

Minimum value: 0 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
disable	Disable SNMP v2c queries.
enable	Enable SNMP v2c queries.

status

Enable/disable this SNMP community.

option

enable

Option	Description
disable	Disable SNMP community.
enable	Enable SNMP community.

trap-v1-lport

SNMP v2c trap local port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-rport

SNMP v2c trap remote port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
disable	Disable SNMP v1 traps.
enable	Enable SNMP v1 traps.

trap-v2c-lport

SNMP v2c trap local port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port.

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
disable	Disable SNMP v2c traps.
enable	Enable SNMP v2c traps.

config hosts

Parameter	Description	Type	Size	Default
id	Host entry ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config switch-controller snmp-community

config switch-controller snmp-community

config switch-controller snmp-community

config hosts

config switch-controller snmp-community

config switch-controller snmp-community

config switch-controller snmp-community

config hosts