config switch-controller snmp-community

Configure FortiSwitch SNMP v1/v2c communities globally.

config switch-controller snmp-community

Description: Configure FortiSwitch SNMP v1/v2c communities globally.

edit <id>

set name {string}

set status [disable|enable]

config hosts

Description: Configure IPv4 SNMP managers (hosts).

edit <id>

set ip {user}

next

end

set query-v1-status [disable|enable]

set query-v1-port {integer}

set query-v2c-status [disable|enable]

set query-v2c-port {integer}

set trap-v1-status [disable|enable]

set trap-v1-lport {integer}

set trap-v1-rport {integer}

set trap-v2c-status [disable|enable]

set trap-v2c-lport {integer}

set trap-v2c-rport {integer}

set events {option1}, {option2}, ...

next

end

config switch-controller snmp-community

Parameter	Description	Type	Size	Default
name	SNMP community name.	string	Maximum length: 35
status	Enable/disable this SNMP community.	option	-	enable
	Option Description disable Disable SNMP community. enable Enable SNMP community.
query-v1-status	Enable/disable SNMP v1 queries.	option	-	enable
	Option Description disable Disable SNMP v1 queries. enable Enable SNMP v1 queries.
query-v1-port	SNMP v1 query port (default = 161).	integer	Minimum value: 0 Maximum value: 65535	161
query-v2c-status	Enable/disable SNMP v2c queries.	option	-	enable
	Option Description disable Disable SNMP v2c queries. enable Enable SNMP v2c queries.
query-v2c-port	SNMP v2c query port (default = 161).	integer	Minimum value: 0 Maximum value: 65535	161
trap-v1-status	Enable/disable SNMP v1 traps.	option	-	enable
	Option Description disable Disable SNMP v1 traps. enable Enable SNMP v1 traps.
trap-v1-lport	SNMP v2c trap local port (default = 162).	integer	Minimum value: 0 Maximum value: 65535	162
trap-v1-rport	SNMP v2c trap remote port (default = 162).	integer	Minimum value: 0 Maximum value: 65535	162
trap-v2c-status	Enable/disable SNMP v2c traps.	option	-	enable
	Option Description disable Disable SNMP v2c traps. enable Enable SNMP v2c traps.
trap-v2c-lport	SNMP v2c trap local port (default = 162).	integer	Minimum value: 0 Maximum value: 65535	162
trap-v2c-rport	SNMP v2c trap remote port (default = 162).	integer	Minimum value: 0 Maximum value: 65535	162
events	SNMP notifications (traps) to send.	option	-	cpu-high mem-low log-full intf-ip ent-conf-change
	Option Description cpu-high Send a trap when CPU usage too high. mem-low Send a trap when available memory is low. log-full Send a trap when log disk space becomes low. intf-ip Send a trap when an interface IP address is changed. ent-conf-change Send a trap when an entity MIB change occurs (RFC4133).

config hosts

Parameter	Description	Type	Size	Default
ip	IPv4 address of the SNMP manager (host).	user	Not Specified