config switch-controller initial-config template
Description: Configure template for auto-generated VLANs.
edit <name>
set vlanid {integer}
set ip {ipv4-classnet-host}
set allowaccess {option1}, {option2}, ...
set auto-ip [enable|disable]
set dhcp-server [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| vlanid | Unique VLAN ID. | integer | Minimum value: 1 Maximum value: 4094 |
| ip | Interface IPv4 address and subnet mask. | ipv4-classnet-host | Not Specified |
| allowaccess | Permitted types of management access to this interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access. |
option | - |
| auto-ip | Automatically allocate interface address and subnet block. enable: Enable auto-ip status. disable: Disable auto-ip status. |
option | - |
| dhcp-server | Enable/disable a DHCP server on this interface. enable: Enable DHCP server. disable: Disable DHCP server. |
option | - |
config switch-controller initial-config template
Description: Configure template for auto-generated VLANs.
edit <name>
set vlanid {integer}
set ip {ipv4-classnet-host}
set allowaccess {option1}, {option2}, ...
set auto-ip [enable|disable]
set dhcp-server [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| vlanid | Unique VLAN ID. | integer | Minimum value: 1 Maximum value: 4094 |
| ip | Interface IPv4 address and subnet mask. | ipv4-classnet-host | Not Specified |
| allowaccess | Permitted types of management access to this interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access. |
option | - |
| auto-ip | Automatically allocate interface address and subnet block. enable: Enable auto-ip status. disable: Disable auto-ip status. |
option | - |
| dhcp-server | Enable/disable a DHCP server on this interface. enable: Enable DHCP server. disable: Disable DHCP server. |
option | - |