config user exchange
Description: Configure MS Exchange server entries.
edit <name>
set server-name {string}
set domain-name {string}
set username {string}
set password {password}
set ip {ipv4-address-any}
set connect-protocol [rpc-over-tcp|rpc-over-http|...]
set auth-type [spnego|ntlm|...]
set auth-level [connect|call|...]
set http-auth-type [basic|ntlm]
set ssl-min-proto-version [default|SSLv3|...]
set auto-discover-kdc [enable|disable]
set kdc-ip <ipv41>, <ipv42>, ...
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| server-name | MS Exchange server hostname. | string | Maximum length: 63 |
| domain-name | MS Exchange server fully qualified domain name. | string | Maximum length: 79 |
| username | User name used to sign in to the server. Must have proper permissions for service. | string | Maximum length: 64 |
| password | Password for the specified username. | password | Not Specified |
| ip | Server IPv4 address. | ipv4-address-any | Not Specified |
| connect-protocol | Connection protocol used to connect to MS Exchange service. rpc-over-tcp: Connect using RPC-over-TCP. Use for MS Exchange 2010 and earlier versions. Supported in MS Exchange 2013. rpc-over-http: Connect using RPC-over-HTTP. Use for MS Exchange 2016 and later versions. Supported in MS Exchange 2013. rpc-over-https: Connect using RPC-over-HTTPS. Use for MS Exchange 2016 and later versions. Supported in MS Exchange 2013. |
option | - |
| auth-type | Authentication security type used for the RPC protocol layer. spnego: Negotiate authentication. ntlm: NTLM authentication. kerberos: Kerberos authentication. |
option | - |
| auth-level | Authentication security level used for the RPC protocol layer. connect: RPC authentication level 'connect'. call: RPC authentication level 'call'. packet: RPC authentication level 'packet'. integrity: RPC authentication level 'integrity'. privacy: RPC authentication level 'privacy'. |
option | - |
| http-auth-type | Authentication security type used for the HTTP transport. basic: Basic HTTP authentication. ntlm: NTLM HTTP authentication. |
option | - |
| ssl-min-proto-version | Minimum SSL/TLS protocol version for HTTPS transport (default is to follow system global setting). default: Follow system global setting. SSLv3: SSLv3. TLSv1: TLSv1. TLSv1-1: TLSv1.1. TLSv1-2: TLSv1.2. |
option | - |
| auto-discover-kdc | Enable/disable automatic discovery of KDC IP addresses. enable: Enable automatic discovery of KDC IP addresses. disable: Disable automatic discovery of KDC IP addresses. |
option | - |
kdc-ip <ipv4> |
KDC IPv4 addresses for Kerberos authentication. KDC IPv4 addresses for Kerberos authentication. |
string | Maximum length: 79 |
config user exchange
Description: Configure MS Exchange server entries.
edit <name>
set server-name {string}
set domain-name {string}
set username {string}
set password {password}
set ip {ipv4-address-any}
set connect-protocol [rpc-over-tcp|rpc-over-http|...]
set auth-type [spnego|ntlm|...]
set auth-level [connect|call|...]
set http-auth-type [basic|ntlm]
set ssl-min-proto-version [default|SSLv3|...]
set auto-discover-kdc [enable|disable]
set kdc-ip <ipv41>, <ipv42>, ...
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| server-name | MS Exchange server hostname. | string | Maximum length: 63 |
| domain-name | MS Exchange server fully qualified domain name. | string | Maximum length: 79 |
| username | User name used to sign in to the server. Must have proper permissions for service. | string | Maximum length: 64 |
| password | Password for the specified username. | password | Not Specified |
| ip | Server IPv4 address. | ipv4-address-any | Not Specified |
| connect-protocol | Connection protocol used to connect to MS Exchange service. rpc-over-tcp: Connect using RPC-over-TCP. Use for MS Exchange 2010 and earlier versions. Supported in MS Exchange 2013. rpc-over-http: Connect using RPC-over-HTTP. Use for MS Exchange 2016 and later versions. Supported in MS Exchange 2013. rpc-over-https: Connect using RPC-over-HTTPS. Use for MS Exchange 2016 and later versions. Supported in MS Exchange 2013. |
option | - |
| auth-type | Authentication security type used for the RPC protocol layer. spnego: Negotiate authentication. ntlm: NTLM authentication. kerberos: Kerberos authentication. |
option | - |
| auth-level | Authentication security level used for the RPC protocol layer. connect: RPC authentication level 'connect'. call: RPC authentication level 'call'. packet: RPC authentication level 'packet'. integrity: RPC authentication level 'integrity'. privacy: RPC authentication level 'privacy'. |
option | - |
| http-auth-type | Authentication security type used for the HTTP transport. basic: Basic HTTP authentication. ntlm: NTLM HTTP authentication. |
option | - |
| ssl-min-proto-version | Minimum SSL/TLS protocol version for HTTPS transport (default is to follow system global setting). default: Follow system global setting. SSLv3: SSLv3. TLSv1: TLSv1. TLSv1-1: TLSv1.1. TLSv1-2: TLSv1.2. |
option | - |
| auto-discover-kdc | Enable/disable automatic discovery of KDC IP addresses. enable: Enable automatic discovery of KDC IP addresses. disable: Disable automatic discovery of KDC IP addresses. |
option | - |
kdc-ip <ipv4> |
KDC IPv4 addresses for Kerberos authentication. KDC IPv4 addresses for Kerberos authentication. |
string | Maximum length: 79 |