config firewall ippool
Configure IPv4 IP pools.
config firewall ippool
Description: Configure IPv4 IP pools.
edit <name>
set type [overload|one-to-one|...]
set startip {ipv4-address-any}
set endip {ipv4-address-any}
set source-startip {ipv4-address-any}
set source-endip {ipv4-address-any}
set block-size {integer}
set num-blocks-per-user {integer}
set pba-timeout {integer}
set permit-any-host [disable|enable]
set arp-reply [disable|enable]
set arp-intf {string}
set associated-interface {string}
set comments {var-string}
next
end
config firewall ippool
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
type |
IP pool type (overload, one-to-one, fixed port range, or port block allocation). |
option |
- |
overload |
||||||||||
|
|
|
|||||||||||||
|
startip |
First IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||
|
endip |
Final IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||
|
source-startip |
First IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||
|
source-endip |
Final IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default: 0.0.0.0). |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||||
|
block-size |
Number of addresses in a block . |
integer |
Minimum value: 64 Maximum value: 4096 |
128 |
||||||||||
|
num-blocks-per-user |
Number of addresses blocks that can be used by a user . |
integer |
Minimum value: 1 Maximum value: 128 |
8 |
||||||||||
|
pba-timeout |
Port block allocation timeout (seconds). |
integer |
Minimum value: 3 Maximum value: 300 |
30 |
||||||||||
|
permit-any-host |
Enable/disable full cone NAT. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
arp-reply |
Enable/disable replying to ARP requests when an IP Pool is added to a policy . |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
arp-intf |
Select an interface from available options that will reply to ARP requests. (If blank, any is selected). |
string |
Maximum length: 15 |
|
||||||||||
|
associated-interface |
Associated interface name. |
string |
Maximum length: 15 |
|
||||||||||
|
comments |
Comment. |
var-string |
Maximum length: 255 |
|
||||||||||