Fortinet white logo
Fortinet white logo

CLI Reference

config system interface

config system interface

Configure interfaces.

config system interface

Description: Configure interfaces.

edit <name>

set vdom {string}

set vrf {integer}

set cli-conn-status {integer}

set fortilink [enable|disable]

set switch-controller-source-ip [outbound|fixed]

set mode [static|dhcp|...]

config client-options

Description: DHCP client options.

edit <id>

set code {integer}

set type [hex|string|...]

set value {string}

set ip {user}

next

end

set distance {integer}

set priority {integer}

set dhcp-relay-interface-select-method [auto|sdwan|...]

set dhcp-relay-interface {string}

set dhcp-relay-service [disable|enable]

set dhcp-relay-ip {user}

set dhcp-relay-request-all-server [disable|enable]

set dhcp-relay-type [regular|ipsec]

set dhcp-relay-agent-option [enable|disable]

set management-ip {ipv4-classnet-host}

set ip {ipv4-classnet-host}

set allowaccess {option1}, {option2}, ...

set gwdetect [enable|disable]

set ping-serv-status {integer}

set detectserver {user}

set detectprotocol {option1}, {option2}, ...

set ha-priority {integer}

set fail-detect [enable|disable]

set fail-detect-option {option1}, {option2}, ...

set fail-alert-method [link-failed-signal|link-down]

set fail-action-on-extender [soft-restart|hard-restart|...]

set fail-alert-interfaces <name1>, <name2>, ...

set dhcp-client-identifier {string}

set dhcp-renew-time {integer}

set ipunnumbered {ipv4-address}

set username {string}

set pppoe-unnumbered-negotiate [enable|disable]

set password {password}

set idle-timeout {integer}

set detected-peer-mtu {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

set defaultgw [enable|disable]

set dns-server-override [enable|disable]

set auth-type [auto|pap|...]

set pptp-client [enable|disable]

set pptp-user {string}

set pptp-password {password}

set pptp-server-ip {ipv4-address}

set pptp-auth-type [auto|pap|...]

set pptp-timeout {integer}

set arpforward [enable|disable]

set ndiscforward [enable|disable]

set broadcast-forward [enable|disable]

set bfd [global|enable|...]

set bfd-desired-min-tx {integer}

set bfd-detect-mult {integer}

set bfd-required-min-rx {integer}

set l2forward [enable|disable]

set icmp-send-redirect [enable|disable]

set icmp-accept-redirect [enable|disable]

set vlanforward [enable|disable]

set stpforward [enable|disable]

set stpforward-mode [rpl-all-ext-id|rpl-bridge-ext-id|...]

set ips-sniffer-mode [enable|disable]

set ident-accept [enable|disable]

set ipmac [enable|disable]

set subst [enable|disable]

set macaddr {mac-address}

set substitute-dst-mac {mac-address}

set speed [auto|10full|...]

set status [up|down]

set netbios-forward [disable|enable]

set wins-ip {ipv4-address}

set type [physical|vlan|...]

set dedicated-to [none|management]

set trust-ip-1 {ipv4-classnet-any}

set trust-ip-2 {ipv4-classnet-any}

set trust-ip-3 {ipv4-classnet-any}

set trust-ip6-1 {ipv6-prefix}

set trust-ip6-2 {ipv6-prefix}

set trust-ip6-3 {ipv6-prefix}

set mtu-override [enable|disable]

set mtu {integer}

set wccp [enable|disable]

set netflow-sampler [disable|tx|...]

set sflow-sampler [enable|disable]

set drop-overlapped-fragment [enable|disable]

set drop-fragment [enable|disable]

set src-check [enable|disable]

set sample-rate {integer}

set polling-interval {integer}

set sample-direction [tx|rx|...]

set explicit-web-proxy [enable|disable]

set explicit-ftp-proxy [enable|disable]

set proxy-captive-portal [enable|disable]

set tcp-mss {integer}

set inbandwidth {integer}

set outbandwidth {integer}

set egress-shaping-profile {string}

set ingress-shaping-profile {string}

set disconnect-threshold {integer}

set spillover-threshold {integer}

set ingress-spillover-threshold {integer}

set weight {integer}

set interface {string}

set external [enable|disable]

set vlan-protocol [8021q|8021ad]

set vlanid {integer}

set forward-domain {integer}

set remote-ip {ipv4-classnet-host}

set member <interface-name1>, <interface-name2>, ...

set lacp-mode [static|passive|...]

set lacp-ha-slave [enable|disable]

set lacp-speed [slow|fast]

set min-links {integer}

set min-links-down [operational|administrative]

set algorithm [L2|L3|...]

set link-up-delay {integer}

set priority-override [enable|disable]

set aggregate {string}

set redundant-interface {string}

set devindex {integer}

set vindex {integer}

set switch {string}

set description {var-string}

set alias {string}

set security-mode [none|captive-portal|...]

set security-mac-auth-bypass [mac-auth-only|enable|...]

set security-external-web {var-string}

set security-external-logout {string}

set replacemsg-override-group {string}

set security-redirect-url {var-string}

set security-exempt-list {string}

set security-groups <name1>, <name2>, ...

set device-identification [enable|disable]

set device-user-identification [enable|disable]

set lldp-reception [enable|disable|...]

set lldp-transmission [enable|disable|...]

set lldp-network-policy {string}

set estimated-upstream-bandwidth {integer}

set estimated-downstream-bandwidth {integer}

set measured-upstream-bandwidth {integer}

set measured-downstream-bandwidth {integer}

set bandwidth-measure-time {integer}

set monitor-bandwidth [enable|disable]

set vrrp-virtual-mac [enable|disable]

config vrrp

Description: VRRP configuration.

edit <vrid>

set version [2|3]

set vrgrp {integer}

set vrip {ipv4-address-any}

set priority {integer}

set adv-interval {integer}

set start-time {integer}

set preempt [enable|disable]

set accept-mode [enable|disable]

set vrdst {ipv4-address-any}

set vrdst-priority {integer}

set ignore-default-route [enable|disable]

set status [enable|disable]

config proxy-arp

Description: VRRP Proxy ARP configuration.

edit <id>

set ip {user}

next

end

next

end

set role [lan|wan|...]

set snmp-index {integer}

set secondary-IP [enable|disable]

config secondaryip

Description: Second IP address of interface.

edit <id>

set ip {ipv4-classnet-host}

set allowaccess {option1}, {option2}, ...

set gwdetect [enable|disable]

set ping-serv-status {integer}

set detectserver {user}

set detectprotocol {option1}, {option2}, ...

set ha-priority {integer}

next

end

set preserve-session-route [enable|disable]

set auto-auth-extension-device [enable|disable]

set ap-discover [enable|disable]

set fortilink-neighbor-detect [lldp|fortilink]

set ip-managed-by-fortiipam [enable|disable]

set managed-subnetwork-size [256|512|...]

set fortilink-split-interface [enable|disable]

set internal {integer}

set fortilink-backup-link {integer}

set switch-controller-access-vlan [enable|disable]

set switch-controller-traffic-policy {string}

set switch-controller-rspan-mode [disable|enable]

set switch-controller-mgmt-vlan {integer}

set switch-controller-igmp-snooping [enable|disable]

set switch-controller-igmp-snooping-proxy [enable|disable]

set switch-controller-igmp-snooping-fast-leave [enable|disable]

set switch-controller-dhcp-snooping [enable|disable]

set switch-controller-dhcp-snooping-verify-mac [enable|disable]

set switch-controller-dhcp-snooping-option82 [enable|disable]

set switch-controller-arp-inspection [enable|disable]

set switch-controller-learning-limit {integer}

set switch-controller-nac {string}

set switch-controller-dynamic {string}

set switch-controller-feature [none|default-vlan|...]

set switch-controller-iot-scanning [enable|disable]

set swc-vlan {integer}

set swc-first-create {integer}

set color {integer}

config tagging

Description: Config object tagging.

edit <name>

set category {string}

set tags <name1>, <name2>, ...

next

end

config egress-queues

Description: Configure queues of NP port on egress path.

set cos0 {string}

set cos1 {string}

set cos2 {string}

set cos3 {string}

set cos4 {string}

set cos5 {string}

set cos6 {string}

set cos7 {string}

end

set ingress-cos [disable|cos0|...]

set egress-cos [disable|cos0|...]

config ipv6

Description: IPv6 of interface.

set ip6-mode [static|dhcp|...]

set nd-mode [basic|SEND-compatible]

set nd-cert {string}

set nd-security-level {integer}

set nd-timestamp-delta {integer}

set nd-timestamp-fuzz {integer}

set nd-cga-modifier {user}

set ip6-dns-server-override [enable|disable]

set ip6-address {ipv6-prefix}

config ip6-extra-addr

Description: Extra IPv6 address prefixes of interface.

edit <prefix>

next

end

set ip6-allowaccess {option1}, {option2}, ...

set ip6-send-adv [enable|disable]

set icmp6-send-redirect [enable|disable]

set ip6-manage-flag [enable|disable]

set ip6-other-flag [enable|disable]

set ip6-max-interval {integer}

set ip6-min-interval {integer}

set ip6-link-mtu {integer}

set ra-send-mtu [enable|disable]

set ip6-reachable-time {integer}

set ip6-retrans-time {integer}

set ip6-default-life {integer}

set ip6-hop-limit {integer}

set autoconf [enable|disable]

set unique-autoconf-addr [enable|disable]

set interface-identifier {ipv6-address}

set ip6-prefix-mode [dhcp6|ra]

set ip6-upstream-interface {string}

set ip6-subnet {ipv6-prefix}

config ip6-prefix-list

Description: Advertised prefix list.

edit <prefix>

set autonomous-flag [enable|disable]

set onlink-flag [enable|disable]

set valid-life-time {integer}

set preferred-life-time {integer}

set rdnss {user}

set dnssl <domain1>, <domain2>, ...

next

end

config ip6-delegated-prefix-list

Description: Advertised IPv6 delegated prefix list.

edit <prefix-id>

set upstream-interface {string}

set autonomous-flag [enable|disable]

set onlink-flag [enable|disable]

set subnet {ipv6-network}

set rdnss-service [delegated|default|...]

set rdnss {user}

next

end

set dhcp6-relay-service [disable|enable]

set dhcp6-relay-type {option}

set dhcp6-relay-ip {user}

set dhcp6-client-options {option1}, {option2}, ...

set dhcp6-prefix-delegation [enable|disable]

set dhcp6-information-request [enable|disable]

set dhcp6-prefix-hint {ipv6-network}

set dhcp6-prefix-hint-plt {integer}

set dhcp6-prefix-hint-vlt {integer}

set cli-conn6-status {integer}

set vrrp-virtual-mac6 [enable|disable]

set vrip6_link_local {ipv6-address}

config vrrp6

Description: IPv6 VRRP configuration.

edit <vrid>

set vrgrp {integer}

set vrip6 {ipv6-address}

set priority {integer}

set adv-interval {integer}

set start-time {integer}

set preempt [enable|disable]

set accept-mode [enable|disable]

set vrdst6 {ipv6-address}

set status [enable|disable]

next

end

end

next

end

config system interface

Parameter

Description

Type

Size

Default

vdom

Interface is in this virtual domain (VDOM).

string

Maximum length: 31

vrf

Virtual Routing Forwarding ID.

integer

Minimum value: 0 Maximum value: 31

0

cli-conn-status

CLI connection status.

integer

Minimum value: 0 Maximum value: 4294967295

0

fortilink

Enable FortiLink to dedicate this interface to manage other Fortinet devices.

option

-

disable

Option

Description

enable

Enable FortiLink to dedicated interface for managing FortiSwitch devices.

disable

Disable FortiLink to dedicated interface for managing FortiSwitch devices.

switch-controller-source-ip

Source IP address used in FortiLink over L3 connections.

option

-

outbound

Option

Description

outbound

Source IP address is that of the outbound interface.

fixed

Source IP address is that of the FortiLink interface.

mode

Addressing mode (static, DHCP, PPPoE).

option

-

static

Option

Description

static

Static setting.

dhcp

External DHCP client mode.

pppoe

External PPPoE mode.

distance

Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.

integer

Minimum value: 1 Maximum value: 255

5

priority

Priority of learned routes.

integer

Minimum value: 0 Maximum value: 4294967295

0

dhcp-relay-interface-select-method

Specify how to select outgoing interface to reach server.

option

-

auto

Option

Description

auto

Set outgoing interface automatically.

sdwan

Set outgoing interface by SD-WAN or policy routing rules.

specify

Set outgoing interface manually.

dhcp-relay-interface

Specify outgoing interface to reach server.

string

Maximum length: 15

dhcp-relay-service

Enable/disable allowing this interface to act as a DHCP relay.

option

-

disable

Option

Description

disable

None.

enable

DHCP relay agent.

dhcp-relay-ip

DHCP relay IP address.

user

Not Specified

dhcp-relay-request-all-server

Enable/disable sending of DHCP requests to all servers.

option

-

disable

Option

Description

disable

Send DHCP requests only to a matching server.

enable

Send DHCP requests to all servers.

dhcp-relay-type

DHCP relay type (regular or IPsec).

option

-

regular

Option

Description

regular

Regular DHCP relay.

ipsec

DHCP relay for IPsec.

dhcp-relay-agent-option

Enable/disable DHCP relay agent option.

option

-

enable

Option

Description

enable

Enable DHCP relay agent option.

disable

Disable DHCP relay agent option.

management-ip

High Availability in-band management IP address of this interface.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

ip

Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

allowaccess

Permitted types of management access to this interface.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

radius-acct

RADIUS accounting access.

probe-response

Probe access.

fabric

Security Fabric access.

ftm

FTM access.

gwdetect

Enable/disable detect gateway alive for first.

option

-

disable

Option

Description

enable

Enable detect gateway alive for first.

disable

Disable detect gateway alive for first.

ping-serv-status

PING server status.

integer

Minimum value: 0 Maximum value: 255

0

detectserver

Gateway's ping server for this IP.

user

Not Specified

detectprotocol

Protocols used to detect the server.

option

-

ping

Option

Description

ping

PING.

tcp-echo

TCP echo.

udp-echo

UDP echo.

ha-priority

HA election priority for the PING server.

integer

Minimum value: 1 Maximum value: 50

1

fail-detect

Enable/disable fail detection features for this interface.

option

-

disable

Option

Description

enable

Enable interface failed option status.

disable

Disable interface failed option status.

fail-detect-option

Options for detecting that this interface has failed.

option

-

link-down

Option

Description

detectserver

Use a ping server to determine if the interface has failed.

link-down

Use port detection to determine if the interface has failed.

fail-alert-method

Select link-failed-signal or link-down method to alert about a failed link.

option

-

link-down

Option

Description

link-failed-signal

Link-failed-signal.

link-down

Link-down.

fail-action-on-extender

Action on extender when interface fail .

option

-

soft-restart

Option

Description

soft-restart

Soft-restart-on-extender.

hard-restart

Hard-restart-on-extender.

reboot

Reboot-on-extender.

fail-alert-interfaces <name>

Names of the FortiGate interfaces to which the link failure alert is sent.

Names of the non-virtual interface.

string

Maximum length: 79

dhcp-client-identifier

DHCP client identifier.

string

Maximum length: 48

dhcp-renew-time

DHCP renew time in seconds , 0 means use the renew time provided by the server.

integer

Minimum value: 300 Maximum value: 604800

0

ipunnumbered

Unnumbered IP used for PPPoE interfaces for which no unique local address is provided.

ipv4-address

Not Specified

0.0.0.0

username

Username of the PPPoE account, provided by your ISP.

string

Maximum length: 64

pppoe-unnumbered-negotiate

Enable/disable PPPoE unnumbered negotiation.

option

-

enable

Option

Description

enable

Enable IP address negotiating for unnumbered.

disable

Disable IP address negotiating for unnumbered.

password

PPPoE account's password.

password

Not Specified

idle-timeout

PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.

integer

Minimum value: 0 Maximum value: 32767

0

detected-peer-mtu

MTU of detected peer .

integer

Minimum value: 0 Maximum value: 4294967295

0

disc-retry-timeout

Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.

integer

Minimum value: 0 Maximum value: 4294967295

1

padt-retry-timeout

PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.

integer

Minimum value: 0 Maximum value: 4294967295

1

service-name

PPPoE service name.

string

Maximum length: 63

ac-name

PPPoE server name.

string

Maximum length: 63

lcp-echo-interval

Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.

integer

Minimum value: 0 Maximum value: 32767

5

lcp-max-echo-fails

Maximum missed LCP echo messages before disconnect.

integer

Minimum value: 0 Maximum value: 32767

3

defaultgw

Enable to get the gateway IP from the DHCP or PPPoE server.

option

-

enable

Option

Description

enable

Enable default gateway.

disable

Disable default gateway.

dns-server-override

Enable/disable use DNS acquired by DHCP or PPPoE.

option

-

enable

Option

Description

enable

Use DNS acquired by DHCP or PPPoE.

disable

No not use DNS acquired by DHCP or PPPoE.

auth-type

PPP authentication type to use.

option

-

auto

Option

Description

auto

Automatically choose authentication.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

pptp-client

Enable/disable PPTP client.

option

-

disable

Option

Description

enable

Enable PPTP client.

disable

Disable PPTP client.

pptp-user

PPTP user name.

string

Maximum length: 64

pptp-password

PPTP password.

password

Not Specified

pptp-server-ip

PPTP server IP address.

ipv4-address

Not Specified

0.0.0.0

pptp-auth-type

PPTP authentication type.

option

-

auto

Option

Description

auto

Automatically choose authentication.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

pptp-timeout

Idle timer in minutes (0 for disabled).

integer

Minimum value: 0 Maximum value: 65535

0

arpforward

Enable/disable ARP forwarding.

option

-

enable

Option

Description

enable

Enable ARP forwarding.

disable

Disable ARP forwarding.

ndiscforward

Enable/disable NDISC forwarding.

option

-

enable

Option

Description

enable

Enable NDISC forwarding.

disable

Disable NDISC forwarding.

broadcast-forward

Enable/disable broadcast forwarding.

option

-

disable

Option

Description

enable

Enable broadcast forwarding.

disable

Disable broadcast forwarding.

bfd

Bidirectional Forwarding Detection (BFD) settings.

option

-

global

Option

Description

global

BFD behavior of this interface will be based on global configuration.

enable

Enable BFD on this interface and ignore global configuration.

disable

Disable BFD on this interface and ignore global configuration.

bfd-desired-min-tx

BFD desired minimal transmit interval.

integer

Minimum value: 1 Maximum value: 100000

250

bfd-detect-mult

BFD detection multiplier.

integer

Minimum value: 1 Maximum value: 50

3

bfd-required-min-rx

BFD required minimal receive interval.

integer

Minimum value: 1 Maximum value: 100000

250

l2forward

Enable/disable l2 forwarding.

option

-

disable

Option

Description

enable

Enable L2 forwarding.

disable

Disable L2 forwarding.

icmp-send-redirect

Enable/disable sending of ICMP redirects.

option

-

enable

Option

Description

enable

Enable sending of ICMP redirects.

disable

Disable sending of ICMP redirects.

icmp-accept-redirect

Enable/disable ICMP accept redirect.

option

-

enable

Option

Description

enable

Enable ICMP accept redirect.

disable

Disable ICMP accept redirect.

vlanforward

Enable/disable traffic forwarding between VLANs on this interface.

option

-

disable

Option

Description

enable

Enable traffic forwarding.

disable

Disable traffic forwarding.

stpforward

Enable/disable STP forwarding.

option

-

disable

Option

Description

enable

Enable STP forwarding.

disable

Disable STP forwarding.

stpforward-mode

Configure STP forwarding mode.

option

-

rpl-all-ext-id

Option

Description

rpl-all-ext-id

Replace all extension IDs (root, bridge).

rpl-bridge-ext-id

Replace the bridge extension ID only.

rpl-nothing

Replace nothing.

ips-sniffer-mode

Enable/disable the use of this interface as a one-armed sniffer.

option

-

disable

Option

Description

enable

Enable IPS sniffer mode.

disable

Disable IPS sniffer mode.

ident-accept

Enable/disable authentication for this interface.

option

-

disable

Option

Description

enable

Enable determining a user's identity from packet identification.

disable

Disable determining a user's identity from packet identification.

ipmac

Enable/disable IP/MAC binding.

option

-

disable

Option

Description

enable

Enable IP/MAC binding.

disable

Disable IP/MAC binding.

subst

Enable to always send packets from this interface to a destination MAC address.

option

-

disable

Option

Description

enable

Send packets from this interface.

disable

Do not send packets from this interface.

macaddr

Change the interface's MAC address.

mac-address

Not Specified

00:00:00:00:00:00 **

substitute-dst-mac

Destination MAC address that all packets are sent to from this interface.

mac-address

Not Specified

00:00:00:00:00:00

speed

Interface speed. The default setting and the options available depend on the interface hardware.

option

-

auto

Option

Description

auto

Automatically adjust speed.

10full

10M full-duplex.

10half

10M half-duplex.

100full

100M full-duplex.

100half

100M half-duplex.

1000full

1000M full-duplex.

1000half

1000M half-duplex.

1000auto

1000M auto adjust.

10000full

10G full-duplex.

status

Bring the interface up or shut the interface down.

option

-

up

Option

Description

up

Bring the interface up.

down

Shut the interface down.

netbios-forward

Enable/disable NETBIOS forwarding.

option

-

disable

Option

Description

disable

Disable NETBIOS forwarding.

enable

Enable NETBIOS forwarding.

wins-ip

WINS server IP.

ipv4-address

Not Specified

0.0.0.0

type

Interface type.

option

-

vlan

Option

Description

physical

Physical interface.

vlan

VLAN interface.

aggregate

Aggregate interface.

redundant

Redundant interface.

tunnel

Tunnel interface.

vdom-link

VDOM link interface.

loopback

Loopback interface.

switch

Software switch interface.

vap-switch

VAP interface.

wl-mesh

WLAN mesh interface.

fext-wan

FortiExtender interface.

vxlan

VXLAN interface.

geneve

GENEVE interface.

hdlc

T1/E1 interface.

switch-vlan

Switch VLAN interface.

emac-vlan

EMAC VLAN interface.

ssl

SSL VPN client interface.

dedicated-to

Configure interface for single purpose.

option

-

none

Option

Description

none

Interface not dedicated for any purpose.

management

Dedicate this interface for management purposes only.

trust-ip-1

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip-2

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip-3

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip6-1

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

trust-ip6-2

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

trust-ip6-3

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

mtu-override

Enable to set a custom MTU for this interface.

option

-

disable

Option

Description

enable

Override default MTU.

disable

Use default MTU.

mtu

MTU value for this interface.

integer

Minimum value: 0 Maximum value: 4294967295

1500

wccp

Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.

option

-

disable

Option

Description

enable

Enable WCCP protocol on this interface.

disable

Disable WCCP protocol on this interface.

netflow-sampler

Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).

option

-

disable

Option

Description

disable

Disable NetFlow protocol on this interface.

tx

Monitor transmitted traffic on this interface.

rx

Monitor received traffic on this interface.

both

Monitor transmitted/received traffic on this interface.

sflow-sampler

Enable/disable sFlow on this interface.

option

-

disable

Option

Description

enable

Enable sFlow protocol on this interface.

disable

Disable sFlow protocol on this interface.

drop-overlapped-fragment

Enable/disable drop overlapped fragment packets.

option

-

disable

Option

Description

enable

Enable drop of overlapped fragment packets.

disable

Disable drop of overlapped fragment packets.

drop-fragment

Enable/disable drop fragment packets.

option

-

disable

Option

Description

enable

Enable/disable drop fragment packets.

disable

Do not drop fragment packets.

src-check

Enable/disable source IP check.

option

-

enable

Option

Description

enable

Enable source IP check.

disable

Disable source IP check.

sample-rate

sFlow sample rate .

integer

Minimum value: 10 Maximum value: 99999

2000

polling-interval

sFlow polling interval .

integer

Minimum value: 1 Maximum value: 255

20

sample-direction

Data that NetFlow collects (rx, tx, or both).

option

-

both

Option

Description

tx

Monitor transmitted traffic on this interface.

rx

Monitor received traffic on this interface.

both

Monitor transmitted/received traffic on this interface.

explicit-web-proxy

Enable/disable the explicit web proxy on this interface.

option

-

disable

Option

Description

enable

Enable explicit Web proxy on this interface.

disable

Disable explicit Web proxy on this interface.

explicit-ftp-proxy

Enable/disable the explicit FTP proxy on this interface.

option

-

disable

Option

Description

enable

Enable explicit FTP proxy on this interface.

disable

Disable explicit FTP proxy on this interface.

proxy-captive-portal

Enable/disable proxy captive portal on this interface.

option

-

disable

Option

Description

enable

Enable proxy captive portal on this interface.

disable

Disable proxy captive portal on this interface.

tcp-mss

TCP maximum segment size. 0 means do not change segment size.

integer

Minimum value: 0 Maximum value: 4294967295

0

inbandwidth

Bandwidth limit for incoming traffic , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

outbandwidth

Bandwidth limit for outgoing traffic , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

egress-shaping-profile

Outgoing traffic shaping profile.

string

Maximum length: 35

ingress-shaping-profile

Incoming traffic shaping profile.

string

Maximum length: 35

disconnect-threshold

Time in milliseconds to wait before sending a notification that this interface is down or disconnected.

integer

Minimum value: 0 Maximum value: 10000

0

spillover-threshold

Egress Spillover threshold , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

ingress-spillover-threshold

Ingress Spillover threshold , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

weight

Default weight for static routes (if route has no weight configured).

integer

Minimum value: 0 Maximum value: 255

0

interface

Interface name.

string

Maximum length: 15

external

Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).

option

-

disable

Option

Description

enable

Enable identifying the interface as an external interface.

disable

Disable identifying the interface as an external interface.

vlan-protocol

Ethernet protocol of VLAN.

option

-

8021q

Option

Description

8021q

IEEE 802.1Q.

8021ad

IEEE 802.1AD.

vlanid

VLAN ID .

integer

Minimum value: 1 Maximum value: 4094

0

forward-domain

Transparent mode forward domain.

integer

Minimum value: 0 Maximum value: 2147483647

0

remote-ip

Remote IP address of tunnel.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

member <interface-name>

Physical interfaces that belong to the aggregate or redundant interface.

Physical interface name.

string

Maximum length: 79

lacp-mode

LACP mode.

option

-

active

Option

Description

static

Use static aggregation, do not send and ignore any LACP messages.

passive

Passively use LACP to negotiate 802.3ad aggregation.

active

Actively use LACP to negotiate 802.3ad aggregation.

lacp-ha-slave

LACP HA slave.

option

-

enable

Option

Description

enable

Allow HA slave to send/receive LACP messages.

disable

Block HA slave from sending/receiving LACP messages.

lacp-speed

How often the interface sends LACP messages.

option

-

slow

Option

Description

slow

Send LACP message every 30 seconds.

fast

Send LACP message every second.

min-links

Minimum number of aggregated ports that must be up.

integer

Minimum value: 1 Maximum value: 32

1

min-links-down

Action to take when less than the configured minimum number of links are active.

option

-

operational

Option

Description

operational

Set the aggregate operationally down.

administrative

Set the aggregate administratively down.

algorithm

Frame distribution algorithm.

option

-

L4

Option

Description

L2

Use layer 2 address for distribution.

L3

Use layer 3 address for distribution.

L4

Use layer 4 information for distribution.

link-up-delay

Number of milliseconds to wait before considering a link is up.

integer

Minimum value: 50 Maximum value: 3600000

50

priority-override

Enable/disable fail back to higher priority port once recovered.

option

-

enable

Option

Description

enable

Enable fail back to higher priority port once recovered.

disable

Disable fail back to higher priority port once recovered.

aggregate

Aggregate interface.

string

Maximum length: 15

redundant-interface

Redundant interface.

string

Maximum length: 15

devindex

Device Index.

integer

Minimum value: 0 Maximum value: 4294967295

0

vindex

Switch control interface VLAN ID.

integer

Minimum value: 0 Maximum value: 65535

0

switch

Contained in switch.

string

Maximum length: 15

description

Description.

var-string

Maximum length: 255

alias

Alias will be displayed with the interface name to make it easier to distinguish.

string

Maximum length: 25

security-mode

Turn on captive portal authentication for this interface.

option

-

none

Option

Description

none

No security option.

captive-portal

Captive portal authentication.

802.1X

802.1X port-based authentication.

security-mac-auth-bypass

Enable/disable MAC authentication bypass.

option

-

disable

Option

Description

mac-auth-only

Enable MAC authentication bypass without EAP.

enable

Enable MAC authentication bypass.

disable

Disable MAC authentication bypass.

security-external-web

URL of external authentication web server.

var-string

Maximum length: 1023

security-external-logout

URL of external authentication logout server.

string

Maximum length: 127

replacemsg-override-group

Replacement message override group.

string

Maximum length: 35

security-redirect-url

URL redirection after disclaimer/authentication.

var-string

Maximum length: 1023

security-exempt-list

Name of security-exempt-list.

string

Maximum length: 35

security-groups <name>

User groups that can authenticate with the captive portal.

Names of user groups that can authenticate with the captive portal.

string

Maximum length: 79

device-identification

Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.

option

-

disable

Option

Description

enable

Enable passive gathering of identity information about hosts.

disable

Disable passive gathering of identity information about hosts.

device-user-identification

Enable/disable passive gathering of user identity information about users on this interface.

option

-

enable

Option

Description

enable

Enable passive gathering of user identity information about users.

disable

Disable passive gathering of user identity information about users.

lldp-reception

Enable/disable Link Layer Discovery Protocol (LLDP) reception.

option

-

vdom

Option

Description

enable

Enable reception of Link Layer Discovery Protocol (LLDP).

disable

Disable reception of Link Layer Discovery Protocol (LLDP).

vdom

Use VDOM Link Layer Discovery Protocol (LLDP) reception configuration setting.

lldp-transmission

Enable/disable Link Layer Discovery Protocol (LLDP) transmission.

option

-

vdom

Option

Description

enable

Enable transmission of Link Layer Discovery Protocol (LLDP).

disable

Disable transmission of Link Layer Discovery Protocol (LLDP).

vdom

Use VDOM Link Layer Discovery Protocol (LLDP) transmission configuration setting.

lldp-network-policy

LLDP-MED network policy profile.

string

Maximum length: 35

estimated-upstream-bandwidth

Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.

integer

Minimum value: 0 Maximum value: 4294967295

0

estimated-downstream-bandwidth

Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.

integer

Minimum value: 0 Maximum value: 4294967295

0

measured-upstream-bandwidth

Measured upstream bandwidth (kbps).

integer

Minimum value: 0 Maximum value: 4294967295

0

measured-downstream-bandwidth

Measured downstream bandwidth (kbps).

integer

Minimum value: 0 Maximum value: 4294967295

0

bandwidth-measure-time

Bandwidth measure time

integer

Minimum value: 0 Maximum value: 4294967295

0

monitor-bandwidth

Enable monitoring bandwidth on this interface.

option

-

disable

Option

Description

enable

Enable monitoring bandwidth on this interface.

disable

Disable monitoring bandwidth on this interface.

vrrp-virtual-mac

Enable/disable use of virtual MAC for VRRP.

option

-

disable

Option

Description

enable

Enable use of virtual MAC for VRRP.

disable

Disable use of virtual MAC for VRRP.

role

Interface role.

option

-

undefined

Option

Description

lan

Connected to local network of endpoints.

wan

Connected to Internet.

dmz

Connected to server zone.

undefined

Interface has no specific role.

snmp-index

Permanent SNMP Index of the interface.

integer

Minimum value: 1 Maximum value: 2147483647

0

secondary-IP

Enable/disable adding a secondary IP to this interface.

option

-

disable

Option

Description

enable

Enable secondary IP.

disable

Disable secondary IP.

preserve-session-route

Enable/disable preservation of session route when dirty.

option

-

disable

Option

Description

enable

Enable preservation of session route when dirty.

disable

Disable preservation of session route when dirty.

auto-auth-extension-device

Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.

option

-

disable

Option

Description

enable

Enable automatic authorization of dedicated Fortinet extension device on this interface.

disable

Disable automatic authorization of dedicated Fortinet extension device on this interface.

ap-discover

Enable/disable automatic registration of unknown FortiAP devices.

option

-

enable

Option

Description

enable

Enable automatic registration of unknown FortiAP devices.

disable

Disable automatic registration of unknown FortiAP devices.

fortilink-neighbor-detect

Protocol for FortiGate neighbor discovery.

option

-

fortilink

Option

Description

lldp

Detect FortiLink neighbors using LLDP protocol.

fortilink

Detect FortiLink neighbors using FortiLink protocol.

ip-managed-by-fortiipam

Enable/disable automatic IP address assignment of this interface by FortiIPAM.

option

-

disable

Option

Description

enable

Enable automatic IP address assignment of this interface by FortiIPAM.

disable

Disable automatic IP address assignment of this interface by FortiIPAM.

managed-subnetwork-size

Number of IP addresses to be allocated by FortiIPAM and used by this FortiGate unit's DHCP server settings.

option

-

256

Option

Description

256

Allocate a subnet with 256 IP addresses.

512

Allocate a subnet with 512 IP addresses.

1024

Allocate a subnet with 1024 IP addresses.

2048

Allocate a subnet with 2048 IP addresses.

4096

Allocate a subnet with 4096 IP addresses.

8192

Allocate a subnet with 8192 IP addresses.

16384

Allocate a subnet with 16384 IP addresses.

32768

Allocate a subnet with 32768 IP addresses.

65536

Allocate a subnet with 65536 IP addresses.

fortilink-split-interface

Enable/disable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy.

option

-

enable

Option

Description

enable

Enable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy.

disable

Disable FortiLink split interface.

internal

Implicitly created.

integer

Minimum value: 0 Maximum value: 255

0

fortilink-backup-link

fortilink split interface backup link.

integer

Minimum value: 0 Maximum value: 255

0

switch-controller-access-vlan

Block FortiSwitch port-to-port traffic.

option

-

disable

Option

Description

enable

Block FortiSwitch port-to-port traffic on the VLAN, only permitting traffic to and from the FortiGate.

disable

Allow normal VLAN traffic.

switch-controller-traffic-policy

Switch controller traffic policy for the VLAN.

string

Maximum length: 63

switch-controller-rspan-mode

Stop Layer2 MAC learning and interception of BPDUs and other packets on this interface.

option

-

disable

Option

Description

disable

Disable RSPAN passthrough mode on this VLAN interface.

enable

Enable RSPAN passthrough mode on this VLAN interface.

switch-controller-mgmt-vlan

VLAN to use for FortiLink management purposes.

integer

Minimum value: 1 Maximum value: 4094

4094

switch-controller-igmp-snooping

Switch controller IGMP snooping.

option

-

disable

Option

Description

enable

Enable IGMP snooping.

disable

Disable IGMP snooping.

switch-controller-igmp-snooping-proxy

Switch controller IGMP snooping proxy.

option

-

disable

Option

Description

enable

Enable IGMP snooping proxy.

disable

Disable IGMP snooping proxy.

switch-controller-igmp-snooping-fast-leave

Switch controller IGMP snooping fast-leave.

option

-

disable

Option

Description

enable

Enable IGMP snooping fast-leave.

disable

Disable IGMP snooping fast-leave.

switch-controller-dhcp-snooping

Switch controller DHCP snooping.

option

-

disable

Option

Description

enable

Enable DHCP snooping for FortiSwitch devices.

disable

Disable DHCP snooping for FortiSwitch devices.

switch-controller-dhcp-snooping-verify-mac

Switch controller DHCP snooping verify MAC.

option

-

disable

Option

Description

enable

Enable DHCP snooping verify source MAC for FortiSwitch devices.

disable

Disable DHCP snooping verify source MAC for FortiSwitch devices.

switch-controller-dhcp-snooping-option82

Switch controller DHCP snooping option82.

option

-

disable

Option

Description

enable

Enable DHCP snooping insert option82 for FortiSwitch devices.

disable

Disable DHCP snooping insert option82 for FortiSwitch devices.

switch-controller-arp-inspection

Enable/disable FortiSwitch ARP inspection.

option

-

disable

Option

Description

enable

Enable ARP inspection for FortiSwitch devices.

disable

Disable ARP inspection for FortiSwitch devices.

switch-controller-learning-limit

Limit the number of dynamic MAC addresses on this VLAN .

integer

Minimum value: 0 Maximum value: 128

0

switch-controller-nac

Integrated FortiLink settings for managed FortiSwitch.

string

Maximum length: 35

switch-controller-dynamic

Integrated FortiLink settings for managed FortiSwitch.

string

Maximum length: 35

switch-controller-feature

Interface's purpose when assigning traffic (read only).

option

-

none

Option

Description

none

VLAN for generic purpose.

default-vlan

Default VLAN (native) assigned to all switch ports upon discovery.

quarantine

VLAN for quarantined traffic.

rspan

VLAN for RSPAN/ERSPAN mirrored traffic.

voice

VLAN dedicated for voice devices.

video

VLAN dedicated for camera devices.

nac

VLAN dedicated for NAC onboarding devices.

switch-controller-iot-scanning

Enable/disable managed FortiSwitch IoT scanning.

option

-

disable

Option

Description

enable

Enable IoT scanning for managed FortiSwitch devices.

disable

Disable IoT scanning for managed FortiSwitch devices.

swc-vlan

Creation status for switch-controller VLANs.

integer

Minimum value: 0 Maximum value: 4294967295

0

swc-first-create

Initial create for switch-controller VLANs.

integer

Minimum value: 0 Maximum value: 4294967295

0

color

Color of icon on the GUI.

integer

Minimum value: 0 Maximum value: 32

0

ingress-cos *

Override incoming CoS in user VLAN tag on VLAN interface or assign a priority VLAN tag on physical interface.

option

-

disable

Option

Description

disable

Disable.

cos0

CoS 0.

cos1

CoS 1.

cos2

CoS 2.

cos3

CoS 3.

cos4

CoS 4.

cos5

CoS 5.

cos6

CoS 6.

cos7

CoS 7.

egress-cos *

Override outgoing CoS in user VLAN tag.

option

-

disable

Option

Description

disable

Disable.

cos0

CoS 0.

cos1

CoS 1.

cos2

CoS 2.

cos3

CoS 3.

cos4

CoS 4.

cos5

CoS 5.

cos6

CoS 6.

cos7

CoS 7.

* This parameter may not exist in some models.

** Values may differ between models.

config client-options

Parameter

Description

Type

Size

Default

code

DHCP client option code.

integer

Minimum value: 0 Maximum value: 255

0

type

DHCP client option type.

option

-

hex

Option

Description

hex

DHCP option in hex.

string

DHCP option in string.

ip

DHCP option in IP.

fqdn

DHCP option in domain search option format.

value

DHCP client option value.

string

Maximum length: 312

ip

DHCP option IPs.

user

Not Specified

config vrrp

Parameter

Description

Type

Size

Default

version

VRRP version.

option

-

2

Option

Description

2

VRRP version 2.

3

VRRP version 3.

vrgrp

VRRP group ID .

integer

Minimum value: 1 Maximum value: 65535

0

vrip

IP address of the virtual router.

ipv4-address-any

Not Specified

0.0.0.0

priority

Priority of the virtual router .

integer

Minimum value: 1 Maximum value: 255

100

adv-interval

Advertisement interval .

integer

Minimum value: 1 Maximum value: 255

1

start-time

Startup time .

integer

Minimum value: 1 Maximum value: 255

3

preempt

Enable/disable preempt mode.

option

-

enable

Option

Description

enable

Enable preempt mode.

disable

Disable preempt mode.

accept-mode

Enable/disable accept mode.

option

-

enable

Option

Description

enable

Enable accept mode.

disable

Disable accept mode.

vrdst

Monitor the route to this destination.

ipv4-address-any

Not Specified

vrdst-priority

Priority of the virtual router when the virtual router destination becomes unreachable .

integer

Minimum value: 0 Maximum value: 254

0

ignore-default-route

Enable/disable ignoring of default route when checking destination.

option

-

disable

Option

Description

enable

Enable ignoring of default route when checking destination.

disable

Disable ignoring of default route when checking destination.

status

Enable/disable this VRRP configuration.

option

-

enable

Option

Description

enable

Enable this VRRP configuration.

disable

Disable this VRRP configuration.

config proxy-arp

Parameter

Description

Type

Size

Default

ip

Set IP addresses of proxy ARP.

user

Not Specified

config secondaryip

Parameter

Description

Type

Size

Default

ip

Secondary IP address of the interface.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

allowaccess

Management access settings for the secondary IP address.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

radius-acct

RADIUS accounting access.

probe-response

Probe access.

fabric

Security Fabric access.

ftm

FTM access.

gwdetect

Enable/disable detect gateway alive for first.

option

-

disable

Option

Description

enable

Enable detect gateway alive for first.

disable

Disable detect gateway alive for first.

ping-serv-status

PING server status.

integer

Minimum value: 0 Maximum value: 255

0

detectserver

Gateway's ping server for this IP.

user

Not Specified

detectprotocol

Protocols used to detect the server.

option

-

ping

Option

Description

ping

PING.

tcp-echo

TCP echo.

udp-echo

UDP echo.

ha-priority

HA election priority for the PING server.

integer

Minimum value: 1 Maximum value: 50

1

config tagging

Parameter

Description

Type

Size

Default

category

Tag category.

string

Maximum length: 63

tags <name>

Tags.

Tag name.

string

Maximum length: 79

config egress-queues

Parameter

Description

Type

Size

Default

cos0

CoS profile name for CoS 0.

string

Maximum length: 35

cos1

CoS profile name for CoS 1.

string

Maximum length: 35

cos2

CoS profile name for CoS 2.

string

Maximum length: 35

cos3

CoS profile name for CoS 3.

string

Maximum length: 35

cos4

CoS profile name for CoS 4.

string

Maximum length: 35

cos5

CoS profile name for CoS 5.

string

Maximum length: 35

cos6

CoS profile name for CoS 6.

string

Maximum length: 35

cos7

CoS profile name for CoS 7.

string

Maximum length: 35

config ipv6

Parameter

Description

Type

Size

Default

ip6-mode

Addressing mode (static, DHCP, delegated).

option

-

static

Option

Description

static

Static setting.

dhcp

DHCPv6 client mode.

pppoe

IPv6 over PPPoE mode.

delegated

IPv6 address with delegated prefix.

nd-mode

Neighbor discovery mode.

option

-

basic

Option

Description

basic

Do not support SEND.

SEND-compatible

Support SEND.

nd-cert

Neighbor discovery certificate.

string

Maximum length: 35

nd-security-level

Neighbor discovery security level .

integer

Minimum value: 0 Maximum value: 7

0

nd-timestamp-delta

Neighbor discovery timestamp delta value .

integer

Minimum value: 1 Maximum value: 3600

300

nd-timestamp-fuzz

Neighbor discovery timestamp fuzz factor .

integer

Minimum value: 1 Maximum value: 60

1

nd-cga-modifier

Neighbor discovery CGA modifier.

user

Not Specified

ip6-dns-server-override

Enable/disable using the DNS server acquired by DHCP.

option

-

enable

Option

Description

enable

Enable using the DNS server acquired by DHCP.

disable

Disable using the DNS server acquired by DHCP.

ip6-address

Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx

ipv6-prefix

Not Specified

::/0

ip6-allowaccess

Allow management access to the interface.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

fabric

Fabric access.

ip6-send-adv

Enable/disable sending advertisements about the interface.

option

-

disable

Option

Description

enable

Enable sending advertisements about this interface.

disable

Disable sending advertisements about this interface.

icmp6-send-redirect

Enable/disable sending of ICMPv6 redirects.

option

-

enable

Option

Description

enable

Enable sending of ICMPv6 redirects.

disable

Disable sending of ICMPv6 redirects.

ip6-manage-flag

Enable/disable the managed flag.

option

-

disable

Option

Description

enable

Enable the managed IPv6 flag.

disable

Disable the managed IPv6 flag.

ip6-other-flag

Enable/disable the other IPv6 flag.

option

-

disable

Option

Description

enable

Enable the other IPv6 flag.

disable

Disable the other IPv6 flag.

ip6-max-interval

IPv6 maximum interval (4 to 1800 sec).

integer

Minimum value: 4 Maximum value: 1800

600

ip6-min-interval

IPv6 minimum interval (3 to 1350 sec).

integer

Minimum value: 3 Maximum value: 1350

198

ip6-link-mtu

IPv6 link MTU.

integer

Minimum value: 1280 Maximum value: 16000

0

ra-send-mtu

Enable/disable sending link MTU in RA packet.

option

-

enable

Option

Description

enable

Enable sending link MTU in RA packet.

disable

Disable sending link MTU in RA packet.

ip6-reachable-time

IPv6 reachable time (milliseconds; 0 means unspecified).

integer

Minimum value: 0 Maximum value: 3600000

0

ip6-retrans-time

IPv6 retransmit time (milliseconds; 0 means unspecified).

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-default-life

Default life (sec).

integer

Minimum value: 0 Maximum value: 9000

1800

ip6-hop-limit

Hop limit (0 means unspecified).

integer

Minimum value: 0 Maximum value: 255

0

autoconf

Enable/disable address auto config.

option

-

disable

Option

Description

enable

Enable auto-configuration.

disable

Disable auto-configuration.

unique-autoconf-addr

Enable/disable unique auto config address.

option

-

disable

Option

Description

enable

Enable unique auto-configuration address.

disable

Disable unique auto-configuration address.

interface-identifier

IPv6 interface identifier.

ipv6-address

Not Specified

::

ip6-prefix-mode

Assigning a prefix from DHCP or RA.

option

-

dhcp6

Option

Description

dhcp6

Use delegated prefix from a DHCPv6 client to form a delegated IPv6 address.

ra

Use prefix from RA to form a delegated IPv6 address.

ip6-upstream-interface

Interface name providing delegated information.

string

Maximum length: 15

ip6-subnet

Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx

ipv6-prefix

Not Specified

::/0

dhcp6-relay-service

Enable/disable DHCPv6 relay.

option

-

disable

Option

Description

disable

Disable DHCPv6 relay

enable

Enable DHCPv6 relay.

dhcp6-relay-type

DHCPv6 relay type.

option

-

regular

Option

Description

regular

Regular DHCP relay.

dhcp6-relay-ip

DHCPv6 relay IP address.

user

Not Specified

dhcp6-client-options

DHCPv6 client options.

option

-

Option

Description

rapid

Send rapid commit option.

iapd

Send including IA-PD option.

iana

Send including IA-NA option.

dhcp6-prefix-delegation

Enable/disable DHCPv6 prefix delegation.

option

-

disable

Option

Description

enable

Enable DHCPv6 prefix delegation.

disable

Disable DHCPv6 prefix delegation.

dhcp6-information-request

Enable/disable DHCPv6 information request.

option

-

disable

Option

Description

enable

Enable DHCPv6 information request.

disable

Disable DHCPv6 information request.

dhcp6-prefix-hint

DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server.

ipv6-network

Not Specified

::/0

dhcp6-prefix-hint-plt

DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time.

integer

Minimum value: 0 Maximum value: 4294967295

604800

dhcp6-prefix-hint-vlt

DHCPv6 prefix hint valid life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

2592000

cli-conn6-status

CLI IPv6 connection status.

integer

Minimum value: 0 Maximum value: 4294967295

0

vrrp-virtual-mac6

Enable/disable virtual MAC for VRRP.

option

-

disable

Option

Description

enable

Enable virtual MAC for VRRP.

disable

Disable virtual MAC for VRRP.

vrip6_link_local

Link-local IPv6 address of virtual router.

ipv6-address

Not Specified

::

config ip6-prefix-list

Parameter

Description

Type

Size

Default

autonomous-flag

Enable/disable the autonomous flag.

option

-

enable

Option

Description

enable

Enable the autonomous flag.

disable

Disable the autonomous flag.

onlink-flag

Enable/disable the onlink flag.

option

-

enable

Option

Description

enable

Enable the onlink flag.

disable

Disable the onlink flag.

valid-life-time

Valid life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

2592000

preferred-life-time

Preferred life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

604800

rdnss

Recursive DNS server option.

user

Not Specified

dnssl <domain>

DNS search list option.

Domain name.

string

Maximum length: 79

config ip6-delegated-prefix-list

Parameter

Description

Type

Size

Default

upstream-interface

Name of the interface that provides delegated information.

string

Maximum length: 15

autonomous-flag

Enable/disable the autonomous flag.

option

-

enable

Option

Description

enable

Enable the autonomous flag.

disable

Disable the autonomous flag.

onlink-flag

Enable/disable the onlink flag.

option

-

enable

Option

Description

enable

Enable the onlink flag.

disable

Disable the onlink flag.

subnet

Add subnet ID to routing prefix.

ipv6-network

Not Specified

::/0

rdnss-service

Recursive DNS service option.

option

-

specify

Option

Description

delegated

Delegated RDNSS settings.

default

System RDNSS settings.

specify

Specify recursive DNS servers.

rdnss

Recursive DNS server option.

user

Not Specified

config vrrp6

Parameter

Description

Type

Size

Default

vrgrp

VRRP group ID .

integer

Minimum value: 1 Maximum value: 65535

0

vrip6

IPv6 address of the virtual router.

ipv6-address

Not Specified

::

priority

Priority of the virtual router .

integer

Minimum value: 1 Maximum value: 255

100

adv-interval

Advertisement interval .

integer

Minimum value: 1 Maximum value: 255

1

start-time

Startup time .

integer

Minimum value: 1 Maximum value: 255

3

preempt

Enable/disable preempt mode.

option

-

enable

Option

Description

enable

Enable preempt mode.

disable

Disable preempt mode.

accept-mode

Enable/disable accept mode.

option

-

enable

Option

Description

enable

Enable accept mode.

disable

Disable accept mode.

vrdst6

Monitor the route to this destination.

ipv6-address

Not Specified

status

Enable/disable VRRP.

option

-

enable

Option

Description

enable

Enable VRRP.

disable

Disable VRRP.

config system interface

config system interface

Configure interfaces.

config system interface

Description: Configure interfaces.

edit <name>

set vdom {string}

set vrf {integer}

set cli-conn-status {integer}

set fortilink [enable|disable]

set switch-controller-source-ip [outbound|fixed]

set mode [static|dhcp|...]

config client-options

Description: DHCP client options.

edit <id>

set code {integer}

set type [hex|string|...]

set value {string}

set ip {user}

next

end

set distance {integer}

set priority {integer}

set dhcp-relay-interface-select-method [auto|sdwan|...]

set dhcp-relay-interface {string}

set dhcp-relay-service [disable|enable]

set dhcp-relay-ip {user}

set dhcp-relay-request-all-server [disable|enable]

set dhcp-relay-type [regular|ipsec]

set dhcp-relay-agent-option [enable|disable]

set management-ip {ipv4-classnet-host}

set ip {ipv4-classnet-host}

set allowaccess {option1}, {option2}, ...

set gwdetect [enable|disable]

set ping-serv-status {integer}

set detectserver {user}

set detectprotocol {option1}, {option2}, ...

set ha-priority {integer}

set fail-detect [enable|disable]

set fail-detect-option {option1}, {option2}, ...

set fail-alert-method [link-failed-signal|link-down]

set fail-action-on-extender [soft-restart|hard-restart|...]

set fail-alert-interfaces <name1>, <name2>, ...

set dhcp-client-identifier {string}

set dhcp-renew-time {integer}

set ipunnumbered {ipv4-address}

set username {string}

set pppoe-unnumbered-negotiate [enable|disable]

set password {password}

set idle-timeout {integer}

set detected-peer-mtu {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

set defaultgw [enable|disable]

set dns-server-override [enable|disable]

set auth-type [auto|pap|...]

set pptp-client [enable|disable]

set pptp-user {string}

set pptp-password {password}

set pptp-server-ip {ipv4-address}

set pptp-auth-type [auto|pap|...]

set pptp-timeout {integer}

set arpforward [enable|disable]

set ndiscforward [enable|disable]

set broadcast-forward [enable|disable]

set bfd [global|enable|...]

set bfd-desired-min-tx {integer}

set bfd-detect-mult {integer}

set bfd-required-min-rx {integer}

set l2forward [enable|disable]

set icmp-send-redirect [enable|disable]

set icmp-accept-redirect [enable|disable]

set vlanforward [enable|disable]

set stpforward [enable|disable]

set stpforward-mode [rpl-all-ext-id|rpl-bridge-ext-id|...]

set ips-sniffer-mode [enable|disable]

set ident-accept [enable|disable]

set ipmac [enable|disable]

set subst [enable|disable]

set macaddr {mac-address}

set substitute-dst-mac {mac-address}

set speed [auto|10full|...]

set status [up|down]

set netbios-forward [disable|enable]

set wins-ip {ipv4-address}

set type [physical|vlan|...]

set dedicated-to [none|management]

set trust-ip-1 {ipv4-classnet-any}

set trust-ip-2 {ipv4-classnet-any}

set trust-ip-3 {ipv4-classnet-any}

set trust-ip6-1 {ipv6-prefix}

set trust-ip6-2 {ipv6-prefix}

set trust-ip6-3 {ipv6-prefix}

set mtu-override [enable|disable]

set mtu {integer}

set wccp [enable|disable]

set netflow-sampler [disable|tx|...]

set sflow-sampler [enable|disable]

set drop-overlapped-fragment [enable|disable]

set drop-fragment [enable|disable]

set src-check [enable|disable]

set sample-rate {integer}

set polling-interval {integer}

set sample-direction [tx|rx|...]

set explicit-web-proxy [enable|disable]

set explicit-ftp-proxy [enable|disable]

set proxy-captive-portal [enable|disable]

set tcp-mss {integer}

set inbandwidth {integer}

set outbandwidth {integer}

set egress-shaping-profile {string}

set ingress-shaping-profile {string}

set disconnect-threshold {integer}

set spillover-threshold {integer}

set ingress-spillover-threshold {integer}

set weight {integer}

set interface {string}

set external [enable|disable]

set vlan-protocol [8021q|8021ad]

set vlanid {integer}

set forward-domain {integer}

set remote-ip {ipv4-classnet-host}

set member <interface-name1>, <interface-name2>, ...

set lacp-mode [static|passive|...]

set lacp-ha-slave [enable|disable]

set lacp-speed [slow|fast]

set min-links {integer}

set min-links-down [operational|administrative]

set algorithm [L2|L3|...]

set link-up-delay {integer}

set priority-override [enable|disable]

set aggregate {string}

set redundant-interface {string}

set devindex {integer}

set vindex {integer}

set switch {string}

set description {var-string}

set alias {string}

set security-mode [none|captive-portal|...]

set security-mac-auth-bypass [mac-auth-only|enable|...]

set security-external-web {var-string}

set security-external-logout {string}

set replacemsg-override-group {string}

set security-redirect-url {var-string}

set security-exempt-list {string}

set security-groups <name1>, <name2>, ...

set device-identification [enable|disable]

set device-user-identification [enable|disable]

set lldp-reception [enable|disable|...]

set lldp-transmission [enable|disable|...]

set lldp-network-policy {string}

set estimated-upstream-bandwidth {integer}

set estimated-downstream-bandwidth {integer}

set measured-upstream-bandwidth {integer}

set measured-downstream-bandwidth {integer}

set bandwidth-measure-time {integer}

set monitor-bandwidth [enable|disable]

set vrrp-virtual-mac [enable|disable]

config vrrp

Description: VRRP configuration.

edit <vrid>

set version [2|3]

set vrgrp {integer}

set vrip {ipv4-address-any}

set priority {integer}

set adv-interval {integer}

set start-time {integer}

set preempt [enable|disable]

set accept-mode [enable|disable]

set vrdst {ipv4-address-any}

set vrdst-priority {integer}

set ignore-default-route [enable|disable]

set status [enable|disable]

config proxy-arp

Description: VRRP Proxy ARP configuration.

edit <id>

set ip {user}

next

end

next

end

set role [lan|wan|...]

set snmp-index {integer}

set secondary-IP [enable|disable]

config secondaryip

Description: Second IP address of interface.

edit <id>

set ip {ipv4-classnet-host}

set allowaccess {option1}, {option2}, ...

set gwdetect [enable|disable]

set ping-serv-status {integer}

set detectserver {user}

set detectprotocol {option1}, {option2}, ...

set ha-priority {integer}

next

end

set preserve-session-route [enable|disable]

set auto-auth-extension-device [enable|disable]

set ap-discover [enable|disable]

set fortilink-neighbor-detect [lldp|fortilink]

set ip-managed-by-fortiipam [enable|disable]

set managed-subnetwork-size [256|512|...]

set fortilink-split-interface [enable|disable]

set internal {integer}

set fortilink-backup-link {integer}

set switch-controller-access-vlan [enable|disable]

set switch-controller-traffic-policy {string}

set switch-controller-rspan-mode [disable|enable]

set switch-controller-mgmt-vlan {integer}

set switch-controller-igmp-snooping [enable|disable]

set switch-controller-igmp-snooping-proxy [enable|disable]

set switch-controller-igmp-snooping-fast-leave [enable|disable]

set switch-controller-dhcp-snooping [enable|disable]

set switch-controller-dhcp-snooping-verify-mac [enable|disable]

set switch-controller-dhcp-snooping-option82 [enable|disable]

set switch-controller-arp-inspection [enable|disable]

set switch-controller-learning-limit {integer}

set switch-controller-nac {string}

set switch-controller-dynamic {string}

set switch-controller-feature [none|default-vlan|...]

set switch-controller-iot-scanning [enable|disable]

set swc-vlan {integer}

set swc-first-create {integer}

set color {integer}

config tagging

Description: Config object tagging.

edit <name>

set category {string}

set tags <name1>, <name2>, ...

next

end

config egress-queues

Description: Configure queues of NP port on egress path.

set cos0 {string}

set cos1 {string}

set cos2 {string}

set cos3 {string}

set cos4 {string}

set cos5 {string}

set cos6 {string}

set cos7 {string}

end

set ingress-cos [disable|cos0|...]

set egress-cos [disable|cos0|...]

config ipv6

Description: IPv6 of interface.

set ip6-mode [static|dhcp|...]

set nd-mode [basic|SEND-compatible]

set nd-cert {string}

set nd-security-level {integer}

set nd-timestamp-delta {integer}

set nd-timestamp-fuzz {integer}

set nd-cga-modifier {user}

set ip6-dns-server-override [enable|disable]

set ip6-address {ipv6-prefix}

config ip6-extra-addr

Description: Extra IPv6 address prefixes of interface.

edit <prefix>

next

end

set ip6-allowaccess {option1}, {option2}, ...

set ip6-send-adv [enable|disable]

set icmp6-send-redirect [enable|disable]

set ip6-manage-flag [enable|disable]

set ip6-other-flag [enable|disable]

set ip6-max-interval {integer}

set ip6-min-interval {integer}

set ip6-link-mtu {integer}

set ra-send-mtu [enable|disable]

set ip6-reachable-time {integer}

set ip6-retrans-time {integer}

set ip6-default-life {integer}

set ip6-hop-limit {integer}

set autoconf [enable|disable]

set unique-autoconf-addr [enable|disable]

set interface-identifier {ipv6-address}

set ip6-prefix-mode [dhcp6|ra]

set ip6-upstream-interface {string}

set ip6-subnet {ipv6-prefix}

config ip6-prefix-list

Description: Advertised prefix list.

edit <prefix>

set autonomous-flag [enable|disable]

set onlink-flag [enable|disable]

set valid-life-time {integer}

set preferred-life-time {integer}

set rdnss {user}

set dnssl <domain1>, <domain2>, ...

next

end

config ip6-delegated-prefix-list

Description: Advertised IPv6 delegated prefix list.

edit <prefix-id>

set upstream-interface {string}

set autonomous-flag [enable|disable]

set onlink-flag [enable|disable]

set subnet {ipv6-network}

set rdnss-service [delegated|default|...]

set rdnss {user}

next

end

set dhcp6-relay-service [disable|enable]

set dhcp6-relay-type {option}

set dhcp6-relay-ip {user}

set dhcp6-client-options {option1}, {option2}, ...

set dhcp6-prefix-delegation [enable|disable]

set dhcp6-information-request [enable|disable]

set dhcp6-prefix-hint {ipv6-network}

set dhcp6-prefix-hint-plt {integer}

set dhcp6-prefix-hint-vlt {integer}

set cli-conn6-status {integer}

set vrrp-virtual-mac6 [enable|disable]

set vrip6_link_local {ipv6-address}

config vrrp6

Description: IPv6 VRRP configuration.

edit <vrid>

set vrgrp {integer}

set vrip6 {ipv6-address}

set priority {integer}

set adv-interval {integer}

set start-time {integer}

set preempt [enable|disable]

set accept-mode [enable|disable]

set vrdst6 {ipv6-address}

set status [enable|disable]

next

end

end

next

end

config system interface

Parameter

Description

Type

Size

Default

vdom

Interface is in this virtual domain (VDOM).

string

Maximum length: 31

vrf

Virtual Routing Forwarding ID.

integer

Minimum value: 0 Maximum value: 31

0

cli-conn-status

CLI connection status.

integer

Minimum value: 0 Maximum value: 4294967295

0

fortilink

Enable FortiLink to dedicate this interface to manage other Fortinet devices.

option

-

disable

Option

Description

enable

Enable FortiLink to dedicated interface for managing FortiSwitch devices.

disable

Disable FortiLink to dedicated interface for managing FortiSwitch devices.

switch-controller-source-ip

Source IP address used in FortiLink over L3 connections.

option

-

outbound

Option

Description

outbound

Source IP address is that of the outbound interface.

fixed

Source IP address is that of the FortiLink interface.

mode

Addressing mode (static, DHCP, PPPoE).

option

-

static

Option

Description

static

Static setting.

dhcp

External DHCP client mode.

pppoe

External PPPoE mode.

distance

Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.

integer

Minimum value: 1 Maximum value: 255

5

priority

Priority of learned routes.

integer

Minimum value: 0 Maximum value: 4294967295

0

dhcp-relay-interface-select-method

Specify how to select outgoing interface to reach server.

option

-

auto

Option

Description

auto

Set outgoing interface automatically.

sdwan

Set outgoing interface by SD-WAN or policy routing rules.

specify

Set outgoing interface manually.

dhcp-relay-interface

Specify outgoing interface to reach server.

string

Maximum length: 15

dhcp-relay-service

Enable/disable allowing this interface to act as a DHCP relay.

option

-

disable

Option

Description

disable

None.

enable

DHCP relay agent.

dhcp-relay-ip

DHCP relay IP address.

user

Not Specified

dhcp-relay-request-all-server

Enable/disable sending of DHCP requests to all servers.

option

-

disable

Option

Description

disable

Send DHCP requests only to a matching server.

enable

Send DHCP requests to all servers.

dhcp-relay-type

DHCP relay type (regular or IPsec).

option

-

regular

Option

Description

regular

Regular DHCP relay.

ipsec

DHCP relay for IPsec.

dhcp-relay-agent-option

Enable/disable DHCP relay agent option.

option

-

enable

Option

Description

enable

Enable DHCP relay agent option.

disable

Disable DHCP relay agent option.

management-ip

High Availability in-band management IP address of this interface.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

ip

Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

allowaccess

Permitted types of management access to this interface.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

radius-acct

RADIUS accounting access.

probe-response

Probe access.

fabric

Security Fabric access.

ftm

FTM access.

gwdetect

Enable/disable detect gateway alive for first.

option

-

disable

Option

Description

enable

Enable detect gateway alive for first.

disable

Disable detect gateway alive for first.

ping-serv-status

PING server status.

integer

Minimum value: 0 Maximum value: 255

0

detectserver

Gateway's ping server for this IP.

user

Not Specified

detectprotocol

Protocols used to detect the server.

option

-

ping

Option

Description

ping

PING.

tcp-echo

TCP echo.

udp-echo

UDP echo.

ha-priority

HA election priority for the PING server.

integer

Minimum value: 1 Maximum value: 50

1

fail-detect

Enable/disable fail detection features for this interface.

option

-

disable

Option

Description

enable

Enable interface failed option status.

disable

Disable interface failed option status.

fail-detect-option

Options for detecting that this interface has failed.

option

-

link-down

Option

Description

detectserver

Use a ping server to determine if the interface has failed.

link-down

Use port detection to determine if the interface has failed.

fail-alert-method

Select link-failed-signal or link-down method to alert about a failed link.

option

-

link-down

Option

Description

link-failed-signal

Link-failed-signal.

link-down

Link-down.

fail-action-on-extender

Action on extender when interface fail .

option

-

soft-restart

Option

Description

soft-restart

Soft-restart-on-extender.

hard-restart

Hard-restart-on-extender.

reboot

Reboot-on-extender.

fail-alert-interfaces <name>

Names of the FortiGate interfaces to which the link failure alert is sent.

Names of the non-virtual interface.

string

Maximum length: 79

dhcp-client-identifier

DHCP client identifier.

string

Maximum length: 48

dhcp-renew-time

DHCP renew time in seconds , 0 means use the renew time provided by the server.

integer

Minimum value: 300 Maximum value: 604800

0

ipunnumbered

Unnumbered IP used for PPPoE interfaces for which no unique local address is provided.

ipv4-address

Not Specified

0.0.0.0

username

Username of the PPPoE account, provided by your ISP.

string

Maximum length: 64

pppoe-unnumbered-negotiate

Enable/disable PPPoE unnumbered negotiation.

option

-

enable

Option

Description

enable

Enable IP address negotiating for unnumbered.

disable

Disable IP address negotiating for unnumbered.

password

PPPoE account's password.

password

Not Specified

idle-timeout

PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.

integer

Minimum value: 0 Maximum value: 32767

0

detected-peer-mtu

MTU of detected peer .

integer

Minimum value: 0 Maximum value: 4294967295

0

disc-retry-timeout

Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.

integer

Minimum value: 0 Maximum value: 4294967295

1

padt-retry-timeout

PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.

integer

Minimum value: 0 Maximum value: 4294967295

1

service-name

PPPoE service name.

string

Maximum length: 63

ac-name

PPPoE server name.

string

Maximum length: 63

lcp-echo-interval

Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.

integer

Minimum value: 0 Maximum value: 32767

5

lcp-max-echo-fails

Maximum missed LCP echo messages before disconnect.

integer

Minimum value: 0 Maximum value: 32767

3

defaultgw

Enable to get the gateway IP from the DHCP or PPPoE server.

option

-

enable

Option

Description

enable

Enable default gateway.

disable

Disable default gateway.

dns-server-override

Enable/disable use DNS acquired by DHCP or PPPoE.

option

-

enable

Option

Description

enable

Use DNS acquired by DHCP or PPPoE.

disable

No not use DNS acquired by DHCP or PPPoE.

auth-type

PPP authentication type to use.

option

-

auto

Option

Description

auto

Automatically choose authentication.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

pptp-client

Enable/disable PPTP client.

option

-

disable

Option

Description

enable

Enable PPTP client.

disable

Disable PPTP client.

pptp-user

PPTP user name.

string

Maximum length: 64

pptp-password

PPTP password.

password

Not Specified

pptp-server-ip

PPTP server IP address.

ipv4-address

Not Specified

0.0.0.0

pptp-auth-type

PPTP authentication type.

option

-

auto

Option

Description

auto

Automatically choose authentication.

pap

PAP authentication.

chap

CHAP authentication.

mschapv1

MS-CHAPv1 authentication.

mschapv2

MS-CHAPv2 authentication.

pptp-timeout

Idle timer in minutes (0 for disabled).

integer

Minimum value: 0 Maximum value: 65535

0

arpforward

Enable/disable ARP forwarding.

option

-

enable

Option

Description

enable

Enable ARP forwarding.

disable

Disable ARP forwarding.

ndiscforward

Enable/disable NDISC forwarding.

option

-

enable

Option

Description

enable

Enable NDISC forwarding.

disable

Disable NDISC forwarding.

broadcast-forward

Enable/disable broadcast forwarding.

option

-

disable

Option

Description

enable

Enable broadcast forwarding.

disable

Disable broadcast forwarding.

bfd

Bidirectional Forwarding Detection (BFD) settings.

option

-

global

Option

Description

global

BFD behavior of this interface will be based on global configuration.

enable

Enable BFD on this interface and ignore global configuration.

disable

Disable BFD on this interface and ignore global configuration.

bfd-desired-min-tx

BFD desired minimal transmit interval.

integer

Minimum value: 1 Maximum value: 100000

250

bfd-detect-mult

BFD detection multiplier.

integer

Minimum value: 1 Maximum value: 50

3

bfd-required-min-rx

BFD required minimal receive interval.

integer

Minimum value: 1 Maximum value: 100000

250

l2forward

Enable/disable l2 forwarding.

option

-

disable

Option

Description

enable

Enable L2 forwarding.

disable

Disable L2 forwarding.

icmp-send-redirect

Enable/disable sending of ICMP redirects.

option

-

enable

Option

Description

enable

Enable sending of ICMP redirects.

disable

Disable sending of ICMP redirects.

icmp-accept-redirect

Enable/disable ICMP accept redirect.

option

-

enable

Option

Description

enable

Enable ICMP accept redirect.

disable

Disable ICMP accept redirect.

vlanforward

Enable/disable traffic forwarding between VLANs on this interface.

option

-

disable

Option

Description

enable

Enable traffic forwarding.

disable

Disable traffic forwarding.

stpforward

Enable/disable STP forwarding.

option

-

disable

Option

Description

enable

Enable STP forwarding.

disable

Disable STP forwarding.

stpforward-mode

Configure STP forwarding mode.

option

-

rpl-all-ext-id

Option

Description

rpl-all-ext-id

Replace all extension IDs (root, bridge).

rpl-bridge-ext-id

Replace the bridge extension ID only.

rpl-nothing

Replace nothing.

ips-sniffer-mode

Enable/disable the use of this interface as a one-armed sniffer.

option

-

disable

Option

Description

enable

Enable IPS sniffer mode.

disable

Disable IPS sniffer mode.

ident-accept

Enable/disable authentication for this interface.

option

-

disable

Option

Description

enable

Enable determining a user's identity from packet identification.

disable

Disable determining a user's identity from packet identification.

ipmac

Enable/disable IP/MAC binding.

option

-

disable

Option

Description

enable

Enable IP/MAC binding.

disable

Disable IP/MAC binding.

subst

Enable to always send packets from this interface to a destination MAC address.

option

-

disable

Option

Description

enable

Send packets from this interface.

disable

Do not send packets from this interface.

macaddr

Change the interface's MAC address.

mac-address

Not Specified

00:00:00:00:00:00 **

substitute-dst-mac

Destination MAC address that all packets are sent to from this interface.

mac-address

Not Specified

00:00:00:00:00:00

speed

Interface speed. The default setting and the options available depend on the interface hardware.

option

-

auto

Option

Description

auto

Automatically adjust speed.

10full

10M full-duplex.

10half

10M half-duplex.

100full

100M full-duplex.

100half

100M half-duplex.

1000full

1000M full-duplex.

1000half

1000M half-duplex.

1000auto

1000M auto adjust.

10000full

10G full-duplex.

status

Bring the interface up or shut the interface down.

option

-

up

Option

Description

up

Bring the interface up.

down

Shut the interface down.

netbios-forward

Enable/disable NETBIOS forwarding.

option

-

disable

Option

Description

disable

Disable NETBIOS forwarding.

enable

Enable NETBIOS forwarding.

wins-ip

WINS server IP.

ipv4-address

Not Specified

0.0.0.0

type

Interface type.

option

-

vlan

Option

Description

physical

Physical interface.

vlan

VLAN interface.

aggregate

Aggregate interface.

redundant

Redundant interface.

tunnel

Tunnel interface.

vdom-link

VDOM link interface.

loopback

Loopback interface.

switch

Software switch interface.

vap-switch

VAP interface.

wl-mesh

WLAN mesh interface.

fext-wan

FortiExtender interface.

vxlan

VXLAN interface.

geneve

GENEVE interface.

hdlc

T1/E1 interface.

switch-vlan

Switch VLAN interface.

emac-vlan

EMAC VLAN interface.

ssl

SSL VPN client interface.

dedicated-to

Configure interface for single purpose.

option

-

none

Option

Description

none

Interface not dedicated for any purpose.

management

Dedicate this interface for management purposes only.

trust-ip-1

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip-2

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip-3

Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

trust-ip6-1

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

trust-ip6-2

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

trust-ip6-3

Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).

ipv6-prefix

Not Specified

::/0

mtu-override

Enable to set a custom MTU for this interface.

option

-

disable

Option

Description

enable

Override default MTU.

disable

Use default MTU.

mtu

MTU value for this interface.

integer

Minimum value: 0 Maximum value: 4294967295

1500

wccp

Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.

option

-

disable

Option

Description

enable

Enable WCCP protocol on this interface.

disable

Disable WCCP protocol on this interface.

netflow-sampler

Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).

option

-

disable

Option

Description

disable

Disable NetFlow protocol on this interface.

tx

Monitor transmitted traffic on this interface.

rx

Monitor received traffic on this interface.

both

Monitor transmitted/received traffic on this interface.

sflow-sampler

Enable/disable sFlow on this interface.

option

-

disable

Option

Description

enable

Enable sFlow protocol on this interface.

disable

Disable sFlow protocol on this interface.

drop-overlapped-fragment

Enable/disable drop overlapped fragment packets.

option

-

disable

Option

Description

enable

Enable drop of overlapped fragment packets.

disable

Disable drop of overlapped fragment packets.

drop-fragment

Enable/disable drop fragment packets.

option

-

disable

Option

Description

enable

Enable/disable drop fragment packets.

disable

Do not drop fragment packets.

src-check

Enable/disable source IP check.

option

-

enable

Option

Description

enable

Enable source IP check.

disable

Disable source IP check.

sample-rate

sFlow sample rate .

integer

Minimum value: 10 Maximum value: 99999

2000

polling-interval

sFlow polling interval .

integer

Minimum value: 1 Maximum value: 255

20

sample-direction

Data that NetFlow collects (rx, tx, or both).

option

-

both

Option

Description

tx

Monitor transmitted traffic on this interface.

rx

Monitor received traffic on this interface.

both

Monitor transmitted/received traffic on this interface.

explicit-web-proxy

Enable/disable the explicit web proxy on this interface.

option

-

disable

Option

Description

enable

Enable explicit Web proxy on this interface.

disable

Disable explicit Web proxy on this interface.

explicit-ftp-proxy

Enable/disable the explicit FTP proxy on this interface.

option

-

disable

Option

Description

enable

Enable explicit FTP proxy on this interface.

disable

Disable explicit FTP proxy on this interface.

proxy-captive-portal

Enable/disable proxy captive portal on this interface.

option

-

disable

Option

Description

enable

Enable proxy captive portal on this interface.

disable

Disable proxy captive portal on this interface.

tcp-mss

TCP maximum segment size. 0 means do not change segment size.

integer

Minimum value: 0 Maximum value: 4294967295

0

inbandwidth

Bandwidth limit for incoming traffic , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

outbandwidth

Bandwidth limit for outgoing traffic , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

egress-shaping-profile

Outgoing traffic shaping profile.

string

Maximum length: 35

ingress-shaping-profile

Incoming traffic shaping profile.

string

Maximum length: 35

disconnect-threshold

Time in milliseconds to wait before sending a notification that this interface is down or disconnected.

integer

Minimum value: 0 Maximum value: 10000

0

spillover-threshold

Egress Spillover threshold , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

ingress-spillover-threshold

Ingress Spillover threshold , 0 means unlimited.

integer

Minimum value: 0 Maximum value: 16776000

0

weight

Default weight for static routes (if route has no weight configured).

integer

Minimum value: 0 Maximum value: 255

0

interface

Interface name.

string

Maximum length: 15

external

Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).

option

-

disable

Option

Description

enable

Enable identifying the interface as an external interface.

disable

Disable identifying the interface as an external interface.

vlan-protocol

Ethernet protocol of VLAN.

option

-

8021q

Option

Description

8021q

IEEE 802.1Q.

8021ad

IEEE 802.1AD.

vlanid

VLAN ID .

integer

Minimum value: 1 Maximum value: 4094

0

forward-domain

Transparent mode forward domain.

integer

Minimum value: 0 Maximum value: 2147483647

0

remote-ip

Remote IP address of tunnel.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

member <interface-name>

Physical interfaces that belong to the aggregate or redundant interface.

Physical interface name.

string

Maximum length: 79

lacp-mode

LACP mode.

option

-

active

Option

Description

static

Use static aggregation, do not send and ignore any LACP messages.

passive

Passively use LACP to negotiate 802.3ad aggregation.

active

Actively use LACP to negotiate 802.3ad aggregation.

lacp-ha-slave

LACP HA slave.

option

-

enable

Option

Description

enable

Allow HA slave to send/receive LACP messages.

disable

Block HA slave from sending/receiving LACP messages.

lacp-speed

How often the interface sends LACP messages.

option

-

slow

Option

Description

slow

Send LACP message every 30 seconds.

fast

Send LACP message every second.

min-links

Minimum number of aggregated ports that must be up.

integer

Minimum value: 1 Maximum value: 32

1

min-links-down

Action to take when less than the configured minimum number of links are active.

option

-

operational

Option

Description

operational

Set the aggregate operationally down.

administrative

Set the aggregate administratively down.

algorithm

Frame distribution algorithm.

option

-

L4

Option

Description

L2

Use layer 2 address for distribution.

L3

Use layer 3 address for distribution.

L4

Use layer 4 information for distribution.

link-up-delay

Number of milliseconds to wait before considering a link is up.

integer

Minimum value: 50 Maximum value: 3600000

50

priority-override

Enable/disable fail back to higher priority port once recovered.

option

-

enable

Option

Description

enable

Enable fail back to higher priority port once recovered.

disable

Disable fail back to higher priority port once recovered.

aggregate

Aggregate interface.

string

Maximum length: 15

redundant-interface

Redundant interface.

string

Maximum length: 15

devindex

Device Index.

integer

Minimum value: 0 Maximum value: 4294967295

0

vindex

Switch control interface VLAN ID.

integer

Minimum value: 0 Maximum value: 65535

0

switch

Contained in switch.

string

Maximum length: 15

description

Description.

var-string

Maximum length: 255

alias

Alias will be displayed with the interface name to make it easier to distinguish.

string

Maximum length: 25

security-mode

Turn on captive portal authentication for this interface.

option

-

none

Option

Description

none

No security option.

captive-portal

Captive portal authentication.

802.1X

802.1X port-based authentication.

security-mac-auth-bypass

Enable/disable MAC authentication bypass.

option

-

disable

Option

Description

mac-auth-only

Enable MAC authentication bypass without EAP.

enable

Enable MAC authentication bypass.

disable

Disable MAC authentication bypass.

security-external-web

URL of external authentication web server.

var-string

Maximum length: 1023

security-external-logout

URL of external authentication logout server.

string

Maximum length: 127

replacemsg-override-group

Replacement message override group.

string

Maximum length: 35

security-redirect-url

URL redirection after disclaimer/authentication.

var-string

Maximum length: 1023

security-exempt-list

Name of security-exempt-list.

string

Maximum length: 35

security-groups <name>

User groups that can authenticate with the captive portal.

Names of user groups that can authenticate with the captive portal.

string

Maximum length: 79

device-identification

Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.

option

-

disable

Option

Description

enable

Enable passive gathering of identity information about hosts.

disable

Disable passive gathering of identity information about hosts.

device-user-identification

Enable/disable passive gathering of user identity information about users on this interface.

option

-

enable

Option

Description

enable

Enable passive gathering of user identity information about users.

disable

Disable passive gathering of user identity information about users.

lldp-reception

Enable/disable Link Layer Discovery Protocol (LLDP) reception.

option

-

vdom

Option

Description

enable

Enable reception of Link Layer Discovery Protocol (LLDP).

disable

Disable reception of Link Layer Discovery Protocol (LLDP).

vdom

Use VDOM Link Layer Discovery Protocol (LLDP) reception configuration setting.

lldp-transmission

Enable/disable Link Layer Discovery Protocol (LLDP) transmission.

option

-

vdom

Option

Description

enable

Enable transmission of Link Layer Discovery Protocol (LLDP).

disable

Disable transmission of Link Layer Discovery Protocol (LLDP).

vdom

Use VDOM Link Layer Discovery Protocol (LLDP) transmission configuration setting.

lldp-network-policy

LLDP-MED network policy profile.

string

Maximum length: 35

estimated-upstream-bandwidth

Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.

integer

Minimum value: 0 Maximum value: 4294967295

0

estimated-downstream-bandwidth

Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.

integer

Minimum value: 0 Maximum value: 4294967295

0

measured-upstream-bandwidth

Measured upstream bandwidth (kbps).

integer

Minimum value: 0 Maximum value: 4294967295

0

measured-downstream-bandwidth

Measured downstream bandwidth (kbps).

integer

Minimum value: 0 Maximum value: 4294967295

0

bandwidth-measure-time

Bandwidth measure time

integer

Minimum value: 0 Maximum value: 4294967295

0

monitor-bandwidth

Enable monitoring bandwidth on this interface.

option

-

disable

Option

Description

enable

Enable monitoring bandwidth on this interface.

disable

Disable monitoring bandwidth on this interface.

vrrp-virtual-mac

Enable/disable use of virtual MAC for VRRP.

option

-

disable

Option

Description

enable

Enable use of virtual MAC for VRRP.

disable

Disable use of virtual MAC for VRRP.

role

Interface role.

option

-

undefined

Option

Description

lan

Connected to local network of endpoints.

wan

Connected to Internet.

dmz

Connected to server zone.

undefined

Interface has no specific role.

snmp-index

Permanent SNMP Index of the interface.

integer

Minimum value: 1 Maximum value: 2147483647

0

secondary-IP

Enable/disable adding a secondary IP to this interface.

option

-

disable

Option

Description

enable

Enable secondary IP.

disable

Disable secondary IP.

preserve-session-route

Enable/disable preservation of session route when dirty.

option

-

disable

Option

Description

enable

Enable preservation of session route when dirty.

disable

Disable preservation of session route when dirty.

auto-auth-extension-device

Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.

option

-

disable

Option

Description

enable

Enable automatic authorization of dedicated Fortinet extension device on this interface.

disable

Disable automatic authorization of dedicated Fortinet extension device on this interface.

ap-discover

Enable/disable automatic registration of unknown FortiAP devices.

option

-

enable

Option

Description

enable

Enable automatic registration of unknown FortiAP devices.

disable

Disable automatic registration of unknown FortiAP devices.

fortilink-neighbor-detect

Protocol for FortiGate neighbor discovery.

option

-

fortilink

Option

Description

lldp

Detect FortiLink neighbors using LLDP protocol.

fortilink

Detect FortiLink neighbors using FortiLink protocol.

ip-managed-by-fortiipam

Enable/disable automatic IP address assignment of this interface by FortiIPAM.

option

-

disable

Option

Description

enable

Enable automatic IP address assignment of this interface by FortiIPAM.

disable

Disable automatic IP address assignment of this interface by FortiIPAM.

managed-subnetwork-size

Number of IP addresses to be allocated by FortiIPAM and used by this FortiGate unit's DHCP server settings.

option

-

256

Option

Description

256

Allocate a subnet with 256 IP addresses.

512

Allocate a subnet with 512 IP addresses.

1024

Allocate a subnet with 1024 IP addresses.

2048

Allocate a subnet with 2048 IP addresses.

4096

Allocate a subnet with 4096 IP addresses.

8192

Allocate a subnet with 8192 IP addresses.

16384

Allocate a subnet with 16384 IP addresses.

32768

Allocate a subnet with 32768 IP addresses.

65536

Allocate a subnet with 65536 IP addresses.

fortilink-split-interface

Enable/disable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy.

option

-

enable

Option

Description

enable

Enable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy.

disable

Disable FortiLink split interface.

internal

Implicitly created.

integer

Minimum value: 0 Maximum value: 255

0

fortilink-backup-link

fortilink split interface backup link.

integer

Minimum value: 0 Maximum value: 255

0

switch-controller-access-vlan

Block FortiSwitch port-to-port traffic.

option

-

disable

Option

Description

enable

Block FortiSwitch port-to-port traffic on the VLAN, only permitting traffic to and from the FortiGate.

disable

Allow normal VLAN traffic.

switch-controller-traffic-policy

Switch controller traffic policy for the VLAN.

string

Maximum length: 63

switch-controller-rspan-mode

Stop Layer2 MAC learning and interception of BPDUs and other packets on this interface.

option

-

disable

Option

Description

disable

Disable RSPAN passthrough mode on this VLAN interface.

enable

Enable RSPAN passthrough mode on this VLAN interface.

switch-controller-mgmt-vlan

VLAN to use for FortiLink management purposes.

integer

Minimum value: 1 Maximum value: 4094

4094

switch-controller-igmp-snooping

Switch controller IGMP snooping.

option

-

disable

Option

Description

enable

Enable IGMP snooping.

disable

Disable IGMP snooping.

switch-controller-igmp-snooping-proxy

Switch controller IGMP snooping proxy.

option

-

disable

Option

Description

enable

Enable IGMP snooping proxy.

disable

Disable IGMP snooping proxy.

switch-controller-igmp-snooping-fast-leave

Switch controller IGMP snooping fast-leave.

option

-

disable

Option

Description

enable

Enable IGMP snooping fast-leave.

disable

Disable IGMP snooping fast-leave.

switch-controller-dhcp-snooping

Switch controller DHCP snooping.

option

-

disable

Option

Description

enable

Enable DHCP snooping for FortiSwitch devices.

disable

Disable DHCP snooping for FortiSwitch devices.

switch-controller-dhcp-snooping-verify-mac

Switch controller DHCP snooping verify MAC.

option

-

disable

Option

Description

enable

Enable DHCP snooping verify source MAC for FortiSwitch devices.

disable

Disable DHCP snooping verify source MAC for FortiSwitch devices.

switch-controller-dhcp-snooping-option82

Switch controller DHCP snooping option82.

option

-

disable

Option

Description

enable

Enable DHCP snooping insert option82 for FortiSwitch devices.

disable

Disable DHCP snooping insert option82 for FortiSwitch devices.

switch-controller-arp-inspection

Enable/disable FortiSwitch ARP inspection.

option

-

disable

Option

Description

enable

Enable ARP inspection for FortiSwitch devices.

disable

Disable ARP inspection for FortiSwitch devices.

switch-controller-learning-limit

Limit the number of dynamic MAC addresses on this VLAN .

integer

Minimum value: 0 Maximum value: 128

0

switch-controller-nac

Integrated FortiLink settings for managed FortiSwitch.

string

Maximum length: 35

switch-controller-dynamic

Integrated FortiLink settings for managed FortiSwitch.

string

Maximum length: 35

switch-controller-feature

Interface's purpose when assigning traffic (read only).

option

-

none

Option

Description

none

VLAN for generic purpose.

default-vlan

Default VLAN (native) assigned to all switch ports upon discovery.

quarantine

VLAN for quarantined traffic.

rspan

VLAN for RSPAN/ERSPAN mirrored traffic.

voice

VLAN dedicated for voice devices.

video

VLAN dedicated for camera devices.

nac

VLAN dedicated for NAC onboarding devices.

switch-controller-iot-scanning

Enable/disable managed FortiSwitch IoT scanning.

option

-

disable

Option

Description

enable

Enable IoT scanning for managed FortiSwitch devices.

disable

Disable IoT scanning for managed FortiSwitch devices.

swc-vlan

Creation status for switch-controller VLANs.

integer

Minimum value: 0 Maximum value: 4294967295

0

swc-first-create

Initial create for switch-controller VLANs.

integer

Minimum value: 0 Maximum value: 4294967295

0

color

Color of icon on the GUI.

integer

Minimum value: 0 Maximum value: 32

0

ingress-cos *

Override incoming CoS in user VLAN tag on VLAN interface or assign a priority VLAN tag on physical interface.

option

-

disable

Option

Description

disable

Disable.

cos0

CoS 0.

cos1

CoS 1.

cos2

CoS 2.

cos3

CoS 3.

cos4

CoS 4.

cos5

CoS 5.

cos6

CoS 6.

cos7

CoS 7.

egress-cos *

Override outgoing CoS in user VLAN tag.

option

-

disable

Option

Description

disable

Disable.

cos0

CoS 0.

cos1

CoS 1.

cos2

CoS 2.

cos3

CoS 3.

cos4

CoS 4.

cos5

CoS 5.

cos6

CoS 6.

cos7

CoS 7.

* This parameter may not exist in some models.

** Values may differ between models.

config client-options

Parameter

Description

Type

Size

Default

code

DHCP client option code.

integer

Minimum value: 0 Maximum value: 255

0

type

DHCP client option type.

option

-

hex

Option

Description

hex

DHCP option in hex.

string

DHCP option in string.

ip

DHCP option in IP.

fqdn

DHCP option in domain search option format.

value

DHCP client option value.

string

Maximum length: 312

ip

DHCP option IPs.

user

Not Specified

config vrrp

Parameter

Description

Type

Size

Default

version

VRRP version.

option

-

2

Option

Description

2

VRRP version 2.

3

VRRP version 3.

vrgrp

VRRP group ID .

integer

Minimum value: 1 Maximum value: 65535

0

vrip

IP address of the virtual router.

ipv4-address-any

Not Specified

0.0.0.0

priority

Priority of the virtual router .

integer

Minimum value: 1 Maximum value: 255

100

adv-interval

Advertisement interval .

integer

Minimum value: 1 Maximum value: 255

1

start-time

Startup time .

integer

Minimum value: 1 Maximum value: 255

3

preempt

Enable/disable preempt mode.

option

-

enable

Option

Description

enable

Enable preempt mode.

disable

Disable preempt mode.

accept-mode

Enable/disable accept mode.

option

-

enable

Option

Description

enable

Enable accept mode.

disable

Disable accept mode.

vrdst

Monitor the route to this destination.

ipv4-address-any

Not Specified

vrdst-priority

Priority of the virtual router when the virtual router destination becomes unreachable .

integer

Minimum value: 0 Maximum value: 254

0

ignore-default-route

Enable/disable ignoring of default route when checking destination.

option

-

disable

Option

Description

enable

Enable ignoring of default route when checking destination.

disable

Disable ignoring of default route when checking destination.

status

Enable/disable this VRRP configuration.

option

-

enable

Option

Description

enable

Enable this VRRP configuration.

disable

Disable this VRRP configuration.

config proxy-arp

Parameter

Description

Type

Size

Default

ip

Set IP addresses of proxy ARP.

user

Not Specified

config secondaryip

Parameter

Description

Type

Size

Default

ip

Secondary IP address of the interface.

ipv4-classnet-host

Not Specified

0.0.0.0 0.0.0.0

allowaccess

Management access settings for the secondary IP address.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

radius-acct

RADIUS accounting access.

probe-response

Probe access.

fabric

Security Fabric access.

ftm

FTM access.

gwdetect

Enable/disable detect gateway alive for first.

option

-

disable

Option

Description

enable

Enable detect gateway alive for first.

disable

Disable detect gateway alive for first.

ping-serv-status

PING server status.

integer

Minimum value: 0 Maximum value: 255

0

detectserver

Gateway's ping server for this IP.

user

Not Specified

detectprotocol

Protocols used to detect the server.

option

-

ping

Option

Description

ping

PING.

tcp-echo

TCP echo.

udp-echo

UDP echo.

ha-priority

HA election priority for the PING server.

integer

Minimum value: 1 Maximum value: 50

1

config tagging

Parameter

Description

Type

Size

Default

category

Tag category.

string

Maximum length: 63

tags <name>

Tags.

Tag name.

string

Maximum length: 79

config egress-queues

Parameter

Description

Type

Size

Default

cos0

CoS profile name for CoS 0.

string

Maximum length: 35

cos1

CoS profile name for CoS 1.

string

Maximum length: 35

cos2

CoS profile name for CoS 2.

string

Maximum length: 35

cos3

CoS profile name for CoS 3.

string

Maximum length: 35

cos4

CoS profile name for CoS 4.

string

Maximum length: 35

cos5

CoS profile name for CoS 5.

string

Maximum length: 35

cos6

CoS profile name for CoS 6.

string

Maximum length: 35

cos7

CoS profile name for CoS 7.

string

Maximum length: 35

config ipv6

Parameter

Description

Type

Size

Default

ip6-mode

Addressing mode (static, DHCP, delegated).

option

-

static

Option

Description

static

Static setting.

dhcp

DHCPv6 client mode.

pppoe

IPv6 over PPPoE mode.

delegated

IPv6 address with delegated prefix.

nd-mode

Neighbor discovery mode.

option

-

basic

Option

Description

basic

Do not support SEND.

SEND-compatible

Support SEND.

nd-cert

Neighbor discovery certificate.

string

Maximum length: 35

nd-security-level

Neighbor discovery security level .

integer

Minimum value: 0 Maximum value: 7

0

nd-timestamp-delta

Neighbor discovery timestamp delta value .

integer

Minimum value: 1 Maximum value: 3600

300

nd-timestamp-fuzz

Neighbor discovery timestamp fuzz factor .

integer

Minimum value: 1 Maximum value: 60

1

nd-cga-modifier

Neighbor discovery CGA modifier.

user

Not Specified

ip6-dns-server-override

Enable/disable using the DNS server acquired by DHCP.

option

-

enable

Option

Description

enable

Enable using the DNS server acquired by DHCP.

disable

Disable using the DNS server acquired by DHCP.

ip6-address

Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx

ipv6-prefix

Not Specified

::/0

ip6-allowaccess

Allow management access to the interface.

option

-

Option

Description

ping

PING access.

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

http

HTTP access.

telnet

TELNET access.

fgfm

FortiManager access.

fabric

Fabric access.

ip6-send-adv

Enable/disable sending advertisements about the interface.

option

-

disable

Option

Description

enable

Enable sending advertisements about this interface.

disable

Disable sending advertisements about this interface.

icmp6-send-redirect

Enable/disable sending of ICMPv6 redirects.

option

-

enable

Option

Description

enable

Enable sending of ICMPv6 redirects.

disable

Disable sending of ICMPv6 redirects.

ip6-manage-flag

Enable/disable the managed flag.

option

-

disable

Option

Description

enable

Enable the managed IPv6 flag.

disable

Disable the managed IPv6 flag.

ip6-other-flag

Enable/disable the other IPv6 flag.

option

-

disable

Option

Description

enable

Enable the other IPv6 flag.

disable

Disable the other IPv6 flag.

ip6-max-interval

IPv6 maximum interval (4 to 1800 sec).

integer

Minimum value: 4 Maximum value: 1800

600

ip6-min-interval

IPv6 minimum interval (3 to 1350 sec).

integer

Minimum value: 3 Maximum value: 1350

198

ip6-link-mtu

IPv6 link MTU.

integer

Minimum value: 1280 Maximum value: 16000

0

ra-send-mtu

Enable/disable sending link MTU in RA packet.

option

-

enable

Option

Description

enable

Enable sending link MTU in RA packet.

disable

Disable sending link MTU in RA packet.

ip6-reachable-time

IPv6 reachable time (milliseconds; 0 means unspecified).

integer

Minimum value: 0 Maximum value: 3600000

0

ip6-retrans-time

IPv6 retransmit time (milliseconds; 0 means unspecified).

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-default-life

Default life (sec).

integer

Minimum value: 0 Maximum value: 9000

1800

ip6-hop-limit

Hop limit (0 means unspecified).

integer

Minimum value: 0 Maximum value: 255

0

autoconf

Enable/disable address auto config.

option

-

disable

Option

Description

enable

Enable auto-configuration.

disable

Disable auto-configuration.

unique-autoconf-addr

Enable/disable unique auto config address.

option

-

disable

Option

Description

enable

Enable unique auto-configuration address.

disable

Disable unique auto-configuration address.

interface-identifier

IPv6 interface identifier.

ipv6-address

Not Specified

::

ip6-prefix-mode

Assigning a prefix from DHCP or RA.

option

-

dhcp6

Option

Description

dhcp6

Use delegated prefix from a DHCPv6 client to form a delegated IPv6 address.

ra

Use prefix from RA to form a delegated IPv6 address.

ip6-upstream-interface

Interface name providing delegated information.

string

Maximum length: 15

ip6-subnet

Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx

ipv6-prefix

Not Specified

::/0

dhcp6-relay-service

Enable/disable DHCPv6 relay.

option

-

disable

Option

Description

disable

Disable DHCPv6 relay

enable

Enable DHCPv6 relay.

dhcp6-relay-type

DHCPv6 relay type.

option

-

regular

Option

Description

regular

Regular DHCP relay.

dhcp6-relay-ip

DHCPv6 relay IP address.

user

Not Specified

dhcp6-client-options

DHCPv6 client options.

option

-

Option

Description

rapid

Send rapid commit option.

iapd

Send including IA-PD option.

iana

Send including IA-NA option.

dhcp6-prefix-delegation

Enable/disable DHCPv6 prefix delegation.

option

-

disable

Option

Description

enable

Enable DHCPv6 prefix delegation.

disable

Disable DHCPv6 prefix delegation.

dhcp6-information-request

Enable/disable DHCPv6 information request.

option

-

disable

Option

Description

enable

Enable DHCPv6 information request.

disable

Disable DHCPv6 information request.

dhcp6-prefix-hint

DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server.

ipv6-network

Not Specified

::/0

dhcp6-prefix-hint-plt

DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time.

integer

Minimum value: 0 Maximum value: 4294967295

604800

dhcp6-prefix-hint-vlt

DHCPv6 prefix hint valid life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

2592000

cli-conn6-status

CLI IPv6 connection status.

integer

Minimum value: 0 Maximum value: 4294967295

0

vrrp-virtual-mac6

Enable/disable virtual MAC for VRRP.

option

-

disable

Option

Description

enable

Enable virtual MAC for VRRP.

disable

Disable virtual MAC for VRRP.

vrip6_link_local

Link-local IPv6 address of virtual router.

ipv6-address

Not Specified

::

config ip6-prefix-list

Parameter

Description

Type

Size

Default

autonomous-flag

Enable/disable the autonomous flag.

option

-

enable

Option

Description

enable

Enable the autonomous flag.

disable

Disable the autonomous flag.

onlink-flag

Enable/disable the onlink flag.

option

-

enable

Option

Description

enable

Enable the onlink flag.

disable

Disable the onlink flag.

valid-life-time

Valid life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

2592000

preferred-life-time

Preferred life time (sec).

integer

Minimum value: 0 Maximum value: 4294967295

604800

rdnss

Recursive DNS server option.

user

Not Specified

dnssl <domain>

DNS search list option.

Domain name.

string

Maximum length: 79

config ip6-delegated-prefix-list

Parameter

Description

Type

Size

Default

upstream-interface

Name of the interface that provides delegated information.

string

Maximum length: 15

autonomous-flag

Enable/disable the autonomous flag.

option

-

enable

Option

Description

enable

Enable the autonomous flag.

disable

Disable the autonomous flag.

onlink-flag

Enable/disable the onlink flag.

option

-

enable

Option

Description

enable

Enable the onlink flag.

disable

Disable the onlink flag.

subnet

Add subnet ID to routing prefix.

ipv6-network

Not Specified

::/0

rdnss-service

Recursive DNS service option.

option

-

specify

Option

Description

delegated

Delegated RDNSS settings.

default

System RDNSS settings.

specify

Specify recursive DNS servers.

rdnss

Recursive DNS server option.

user

Not Specified

config vrrp6

Parameter

Description

Type

Size

Default

vrgrp

VRRP group ID .

integer

Minimum value: 1 Maximum value: 65535

0

vrip6

IPv6 address of the virtual router.

ipv6-address

Not Specified

::

priority

Priority of the virtual router .

integer

Minimum value: 1 Maximum value: 255

100

adv-interval

Advertisement interval .

integer

Minimum value: 1 Maximum value: 255

1

start-time

Startup time .

integer

Minimum value: 1 Maximum value: 255

3

preempt

Enable/disable preempt mode.

option

-

enable

Option

Description

enable

Enable preempt mode.

disable

Disable preempt mode.

accept-mode

Enable/disable accept mode.

option

-

enable

Option

Description

enable

Enable accept mode.

disable

Disable accept mode.

vrdst6

Monitor the route to this destination.

ipv6-address

Not Specified

status

Enable/disable VRRP.

option

-

enable

Option

Description

enable

Enable VRRP.

disable

Disable VRRP.