config system virtual-switch

This command is available for reference model(s) FortiGate 140E-POE, FortiWiFi 61F. It is not available for FortiGate 601E, FortiGate 2201E, FortiGate VM64.

Configure virtual hardware switch interfaces.

config system virtual-switch

Description: Configure virtual hardware switch interfaces.

edit <name>

set physical-switch {string}

set vlan {integer}

config port

Description: Configure member ports.

edit <name>

set alias {string}

set poe [enable|disable]

next

end

set span [disable|enable]

set span-source-port {string}

set span-dest-port {string}

set span-direction [rx|tx|...]

next

end

config system virtual-switch

Parameter	Description	Type	Size	Default
physical-switch	Physical switch parent.	string	Not Specified
vlan *	VLAN.	integer	Minimum value: 0 Maximum value: 4294967295	0
span	Enable/disable SPAN.	option	-	disable
	Option Description disable Disable SPAN. enable Enable SPAN.
span-source-port	SPAN source port.	string	Not Specified
span-dest-port	SPAN destination port.	string	Not Specified
span-direction	SPAN direction.	option	-	both
	Option Description rx SPAN receive direction only. tx SPAN transmit direction only. both SPAN both directions.

* This parameter may not exist in some models.

config port

Parameter	Description	Type	Size	Default
alias	Alias.	string	Not Specified
poe *	Enable/disable PoE status.	option	-	enable
	Option Description enable Enable PoE status. disable Disable PoE status.

* This parameter may not exist in some models.