config wireless-controller hotspot20 h2qp-wan-metric

Configure WAN metrics.

config wireless-controller hotspot20 h2qp-wan-metric
    Description: Configure WAN metrics.
    edit <name>
        set downlink-load {integer}
        set downlink-speed {integer}
        set link-at-capacity [enable|disable]
        set link-status [up|down|...]
        set load-measurement-duration {integer}
        set name {string}
        set symmetric-wan-link [symmetric|asymmetric]
        set uplink-load {integer}
        set uplink-speed {integer}
    next
end

config wireless-controller hotspot20 h2qp-wan-metric

Parameter	Description	Type	Size	Default
downlink-load	Downlink load.	integer	Minimum value: 0 Maximum value: 255	0
downlink-speed	Downlink speed (in kilobits/s).	integer	Minimum value: 0 Maximum value: 4294967295	2400
link-at-capacity	Link at capacity.	option	-	disable
	Option Description enable Link at capacity (not allow additional mobile devices to associate). disable Link not at capacity (allow additional mobile devices to associate).
link-status	Link status.	option	-	up
	Option Description up Link up. down Link down. in-test Link in test state.
load-measurement-duration	Load measurement duration (in tenths of a second).	integer	Minimum value: 0 Maximum value: 65535	0
name	WAN metric name.	string	Not Specified
symmetric-wan-link	WAN link symmetry.	option	-	asymmetric
	Option Description symmetric Symmetric WAN link (uplink and downlink speeds are the same). asymmetric Asymmetric WAN link (uplink and downlink speeds are not the same).
uplink-load	Uplink load.	integer	Minimum value: 0 Maximum value: 255	0
uplink-speed	Uplink speed (in kilobits/s).	integer	Minimum value: 0 Maximum value: 4294967295	2400