SD-WAN supports BGP Neighbor Configuration (per-device management mode)
SD-WAN template supports BGP neighbor configuration in per-device management mode.
To configure BGP neighbor in per-device mode:
- Go to Device Manager > SD-WAN > Neighbor.
- Select a neighbor and click Edit. Configure the following settings and click OK.
FortiOS CLI configuration:
config system virtual-wan-link set status enable ... config members ... end config health-check ... end config service ... end config neighbor edit "10.254.0.1" set member 1 set role primary set health-check "http" set sla-id 1 next edit "10.254.1.1" set member 2 set role secondary set health-check "test_dc" set sla-id 1 next end end