Creating new DMZ settings
When creating a profile, you can also create new DMZ settings.
To create new DMZ settings:
- Go to Configuration > Profile.
The list of profiles is displayed.
- Create a new profile, or open a profile for updating.
The Profile <name> dialog box is displayed.
- Click the Network tab.
The Network pane is displayed. For a description of the options, see Network tab.
- Expand the DMZ section, and click +Create New.
The DMZ dialog box is displayed.
Option
Description
Name
Type a name for the interface.
Port Type
Select the type of port. Choose from VLAN or AGGREGATE.
Physical Port
Available when Port Type is set to VLAN.
Select the port number.
VLAN ID
Available when Port Type is set to VLAN.
Type an ID for the VLAN.
Allow Overlap Between Devices
Toggle on to allow overlap between devices and specify the IP address of the other device.
IP Address
Available when Allow Overlap Between Devices is toggled on.
Type the IP address of the device that can be overlapped.
IP Auto Assign
Available when Allow Overlap Between Devices is toggled off.
Toggle on to allow automatic IP assignment from a pool of IP addresses.
IP Pool
Available when IP Auto Assign is toggled on.
Select the pool of IP addresses to use for automatic assignment.
If you have not yet created a pool of IP addresses, you can create one. In the dropdown list, click Create. See also Creating intranet IP pools.
Subnet Mask Length
Type the prefix of the IP address or subnet mask.
DHCP Mode
Specify whether to use DHCP for automatic IP assignment. Select one of the following options:
- None - DHCP is not used.
- Server - Enable DHCP server.
- Relay - Enable DHCP relay agent.
DHCP
When DHCP Mode is set to Server, select a server from shared resources. See Creating DHCP servers.
When DHCP Mode is set to Relay, select a relay agent from shared resources. See Creating DHCP relay agents.
DHCP Pool Auto Assign
Available when DHCP Mode is set to Server.
Toggle on to enable and specify the pool size.
Access Types
Select the types of access to allow on the interface.
- Complete the options, and click OK.
The DMZ setting is created.
- If you set Port Type to AGGREGATE, open the DMZ settings for editing, select interface members, and click OK.
Interface members are added to the DMZ settings.