Access control list

Access control lists define WiFi access permissions for SSIDs. When you create SSID profiles, you can select an access control list.

To view access control lists:

1. If using ADOMs, ensure that you are in the correct ADOM.
2. Go to AP Manager > WiFi Templates > Access Control List.

   The following options are available in the toolbar and right-click menu:

   Create New	Create a new access control list.
   Edit	Edit the selected access control list.
   Delete	Delete the selected access control list.
   Clone	Clone the selected access control list.
   Where Used	View where the selected access control list is used.
   Import	Import access control lists from a connected FortiGate (toolbar only).

To create access control lists:

1. If using ADOMs, ensure that you are in the correct ADOM.
2. Go to AP Manager > WiFi Templates > Access Control List.
3. In the toolbar, Create New.

   The Create New Access Control List pane opens.

   

4. Enter the following information:

   Name	Type a name for the access control list.
   Comment	Optionally, enter comments.
   Layer3 IPv4 Rules	Click Create New to define access control rules for IPv4 addresses in layer 3. Select the following, then click OK: Rule ID: Enter an ID for the rule. Comments: Optionally, enter a description. Source Address: Enter the source IP address. Source Port: Enter the source port. Destination Address: Enter the destination IP address. Destination Port: Enter the destination port. Protocol: Enter the protocol. Action: Select the policy action. Select Allow or Deny to allow or deny traffic matching the policy.
   Layer 3 IPv6 Rules	Click Create New to define access control rules for IPv6 addresses in layer 3. Select the following, then click OK: Rule ID: Enter an ID for the rule. Comments: Optionally, enter a description. Source Address: Enter the source IP address. Source Port: Enter the source port. Destination Address: Enter the destination IP address. Destination Port: Enter the destination port. Protocol: Enter the protocol. Action: Select the policy action. Select Allow or Deny to allow or deny traffic matching the policy.

5. Click OK to create the new access control list.

To edit access control lists:

1. Select the access control list.
2. In the toolbar, click Edit, or right-click the access control list and select Edit. You can also double-click an access control list to open it. The Edit Access Control List pane opens.
3. Edit the settings as required.
4. Click OK to apply your changes.

To delete access control lists:

1. Select one or more access control lists to be deleted.
2. In the toolbar, click Delete, or right-click the access control list and select Delete.
3. Click OK in the confirmation dialog box to delete the access control list.

To clone access control lists:

1. Select the access control list to be cloned.
2. In the toolbar, click More > Clone, or right-click the access control list and select Clone.
3. Edit the name, then edit the remaining settings as required.
4. Click OK to clone the access control list.

To view where an access control list is used:

1. Select the access control list.
2. In the toolbar, click More > Where Used, or right-click the access control list and select Where Used. The Where <profile name> is used pane is displayed.
3. Click Close.

To import access control lists:

1. In the toolbar, click More > Import . The Import dialog opens.
2. From the FortiGate dropdown, select a FortiGate from the list. The list will include all of the devices in the current ADOM.
3. From the Profiles dropdown, select one or more access control lists to be imported.
4. Click OK to import the access control lists.