Assign SD-WAN templates to devices and device groups
You can assign SD-WAN templates to FortiGate devices. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.
To assign an SD-WAN template to a FortiGate device or device group:
- If using ADOMs, ensure that you are in the correct ADOM.
-
Go to SD-WAN Manager > Rules .
The SD-WAN templates are displayed in the content pane.
- Select a template, and click Assign to Device/Group.
The Assign to Device/Group dialog opens.
- In the Available Entries list, select a FortiGate, and click > to move the FortiGate to the Selected Entries list.
- Click OK.
To edit an assigned device:
- If using ADOMs, ensure that you are in the correct ADOM.
-
Go to SD-WAN Manager > Rules .
The SD-WAN templates are displayed in the content pane.
- Select the template with the assigned device, and click Assign to Device/Groups in the toolbar, or right-click the device and select Assign to Device/Groups.
The Assign to Device/Groups page opens.
- Edit the assigned devices or device groups, and click OK to apply your changes.