Sensors

The Sensors page shows the sensors deployed in your account, both in the aggregate and individually. Use this page to generate provisioning codes, check the status of individual sensors, and view telemetry data.

To access to the Sensors page, click the gear icon at the top-right of the page and select Sensors.

Sensor ID	Click the Sensor ID to view the sensor Status, Telemetry and Settings pages. For information, see Sensor status
Status	The sensor connection status. Online Sensor is connected to FortiNDR Cloud within last hour. Offline No telemetry data received by the sensor for at least an hour. Provisioning Provisioning code has been created and made initial connection but provisioning process is not complete. Decommissioned Sensor has been factory reset (only applicable for 1.12 or above). Decommissioned (legacy) A sensor earlier than 1.12 has been marked as decommissioned and has not sent any additional data. If sensor sends data to FortiNDR Cloud, status will change to Online. Decommissioned (auto) A sensor 1.12 or later has been marked as decommissioned, but has not communicated with FortiNDR Cloud in the last 7 days. If the sensor later connects to FortiNDR Cloud, it should factory reset itself and switch to Decommissioned status. Shutdown A Zscaler virtual sensor is no longer active. All other statuses are written by the sensor itself.
Version	The sensor version. Unknown is displayed when there is no data for the version.
Labels	Annotations that are applied to the sensor. See, Manage Annotations
Location	The sensor location.
EPS (7 Day Average)	The average throughput over last 7 days as Events Per Second
BITS/S (7 Day Average)	The average throughput over last 7 days as Bits Per Second.
Type	The platform the sensor was deployed on.
Actions	Click to edit the sensor settings. See Sensor settings.

To filter the Sensors page:

1. In the toolbar, click the filter icon.

   

2. Click the Status dropdown to filter by status. The default filter is any status that is not Decommissioned.The filter only displays the available statuses.
3. Click the Type dropdown to filter the page by the sensor type.

You can use the Search function to search for a sensor by ID, label or location.