config system ICAP server

Use this command to configure ICAP server settings.

Syntax

config system icap server
     set conf-level <confidence_level_int> 
     set interface {port1 | port2}
     set enable {1 | 0}
     set rtavscan {1 | 0}
     set ssl-port <ssl_port_int>
     set ssl-support {1 | 0}
     set port <port_int>
     set timeout <timeout_int>
end

Variable	Description	Default
`conf-level <confidence_level_int>`	The confidence of detection. Value is between 0 and 100.	`80`
`interface {port1 \| port2}`	Interface name.	`Port1`
`enable {1 \| 0}`	Set to 1 to enable ICAP server. Set to 0 to disable the ICAP server.
`rtavscan {1\|0}`	Set to 1 to enable realtime FAI scan. Set to 0 to disable.
`timeout <timeout_int>`	The maximum waiting time for realtime FAI scan.	`10`
`ssl-port <ssl_port_int>`	ICAP server SSL port number.
`ssl-support {1 \| 0}`	Set to 1 to enable SSL support. Set to 0 to disable it.
`port <port_int>`	ICAP server port.

config system ICAP server

Use this command to configure ICAP server settings.

Syntax

config system icap server set conf-level <confidence_level_int> set interface {port1 | port2} set enable {1 | 0} set rtavscan {1 | 0} set ssl-port <ssl_port_int> set ssl-support {1 | 0} set port <port_int> set timeout <timeout_int> end

Variable

Description

Default

conf-level <confidence_level_int>

The confidence of detection. Value is between 0 and 100.

80

interface {port1 | port2}

Interface name.

Port1

enable {1 | 0}

Set to 1 to enable ICAP server. Set to 0 to disable the ICAP server.

rtavscan {1|0}

Set to 1 to enable realtime FAI scan. Set to 0 to disable.

timeout <timeout_int>

The maximum waiting time for realtime FAI scan.

10

ssl-port <ssl_port_int>

ICAP server SSL port number.

ssl-support {1 | 0}

Set to 1 to enable SSL support. Set to 0 to disable it.

port <port_int>

ICAP server port.

CLI reference

config system ICAP server