config system wccp
Configure WCCP.
config system wccp
Description: Configure WCCP.
edit <service-id>
set router-id {ipv4-address}
set cache-id {ipv4-address}
set group-address {ipv4-address-multicast}
set server-list {user}
set router-list {user}
set ports-defined [source|destination]
set server-type [forward|proxy]
set ports {user}
set authentication [enable|disable]
set password {password}
set forward-method [GRE|L2|...]
set cache-engine-method [GRE|L2]
set service-type [auto|standard|...]
set primary-hash {option1}, {option2}, ...
set priority {integer}
set protocol {integer}
set assignment-weight {integer}
set assignment-bucket-format [wccp-v2|cisco-implementation]
set return-method [GRE|L2|...]
set assignment-method [HASH|MASK|...]
set assignment-srcaddr-mask {ipv4-netmask-any}
set assignment-dstaddr-mask {ipv4-netmask-any}
next
end
config system wccp
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
router-id |
IP address known to all cache engines. If all cache engines connect to the same FortiProxy interface, use the default 0.0.0.0. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||||||
|
cache-id |
IP address known to all routers. If the addresses are the same, use the default 0.0.0.0. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||||||
|
group-address |
IP multicast address used by the cache routers. For the FortiProxy to ignore multicast WCCP traffic, use the default 0.0.0.0. |
ipv4-address-multicast |
Not Specified |
0.0.0.0 |
||||||||||
|
server-list |
IP addresses and netmasks for up to four cache servers. |
user |
Not Specified |
|
||||||||||
|
router-list |
IP addresses of one or more WCCP routers. |
user |
Not Specified |
|
||||||||||
|
ports-defined |
Match method. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
server-type |
Cache server type. |
option |
- |
forward |
||||||||||
|
|
|
|||||||||||||
|
ports |
Service ports. |
user |
Not Specified |
|
||||||||||
|
authentication |
Enable/disable MD5 authentication. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
password |
Password for MD5 authentication. |
password |
Not Specified |
|
||||||||||
|
forward-method |
Method used to forward traffic to the cache servers. |
option |
- |
GRE |
||||||||||
|
|
|
|||||||||||||
|
cache-engine-method |
Method used to forward traffic to the routers or to return to the cache engine. |
option |
- |
GRE |
||||||||||
|
|
|
|||||||||||||
|
service-type |
WCCP service type used by the cache server for logical interception and redirection of traffic. |
option |
- |
auto |
||||||||||
|
|
|
|||||||||||||
|
primary-hash |
Hash method. |
option |
- |
dst-ip |
||||||||||
|
|
|
|||||||||||||
|
priority |
Service priority. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||||||
|
protocol |
Service protocol. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||||||
|
assignment-weight |
Assignment of hash weight/ratio for the WCCP cache engine. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||||||
|
assignment-bucket-format |
Assignment bucket format for the WCCP cache engine. |
option |
- |
cisco-implementation |
||||||||||
|
|
|
|||||||||||||
|
return-method |
Method used to decline a redirected packet and return it to the FortiProxy unit. |
option |
- |
GRE |
||||||||||
|
|
|
|||||||||||||
|
assignment-method |
Hash key assignment preference. |
option |
- |
HASH |
||||||||||
|
|
|
|||||||||||||
|
assignment-srcaddr-mask |
Assignment source address mask. |
ipv4-netmask-any |
Not Specified |
0.0.23.65 |
||||||||||
|
assignment-dstaddr-mask |
Assignment destination address mask. |
ipv4-netmask-any |
Not Specified |
0.0.0.0 |
||||||||||