Connecting to the FortiSandbox VM
- In the Prism Element web console, go to VM.
- Click the FortiSandbox-VM you created in Creating the FortiSandbox deployment image.
- Click Power On to power on the VM.
By default, the FortiSandbox-VM is shut down after initial creation.
- Click the Launch Console tab to check that the VM boots up successfully.
- When the console prompts for login credentials, log into FortiSandbox using the username admin and no password.
-
Configure the interface port1 IP address using the CLI command
set port1-ip
with the IP address when you registered. See Licensing on page 1.For example:
set port1-ip 1.1.1.2/24
- Access the FortiSandbox in your browser.
- Log into FortiSandbox-VM with the username admin and no password.
-
Upload your license (.lic) file to activate the FortiSandbox-VM.
The FortiSandbox-VM automatically restarts. After it restarts, wait about 30 minutes until the license is fully registered at Fortinet, then log in again.
- After you log in and you see the FortiSandbox dashboard, go to Network > Interfaces to check the network interface setting.
You can see and configure the assigned IP address.