Fortinet black logo

Diagnose commands

Diagnose commands

The following diagnostic commands are available:

Command

Description

diagnose-clilog

Record all CLI input and output.

See diagnose-clilog for details.

diagnose-debug

Display detailed debug logs of network share scan and communications with devices.

See diagnose-debug for details.

diagnose-krnlog

Record the kernel ring buffer.

See diagnose-krnlog for details.

diagnose-sys-perf

Display system performance information.

Optionally, specify how many previous hours to show with -m<hours> (maximum = 40320, default = 1).

diagnose-sys-top

Display system top information.

See diagnose-sys-top for details.

disk-attributes

Display system disk attributes. This option is only available on hardware models.

disk-errors

Display any system disk errors. This option is only available on hardware models.

disk-health

Display disk health information. This option is only available on hardware models.

disk-info

Display disk hardware status information. This option is only available on hardware models.

hardware-info

Display general hardware status information. Use this option to view CPU, memory, disk, and RAID information, as well as system time settings, and hardware temperature, fan speed, Power Supply Status, hard-disk status.

raid-hwinfo

Display RAID hardware status information, including if auto RAID (AutoRebuild) is enabled. This option is only available on hardware models.

tac-report

A collection of config, diagnose, system, and utility commands for monitoring and troubleshooting purposes.

test-network

Test the network connection. Use the output to detect network speed and connection to FDN servers and Microsoft servers.

Fort deatils, see test-network.

Diagnose commands

The following diagnostic commands are available:

Command

Description

diagnose-clilog

Record all CLI input and output.

See diagnose-clilog for details.

diagnose-debug

Display detailed debug logs of network share scan and communications with devices.

See diagnose-debug for details.

diagnose-krnlog

Record the kernel ring buffer.

See diagnose-krnlog for details.

diagnose-sys-perf

Display system performance information.

Optionally, specify how many previous hours to show with -m<hours> (maximum = 40320, default = 1).

diagnose-sys-top

Display system top information.

See diagnose-sys-top for details.

disk-attributes

Display system disk attributes. This option is only available on hardware models.

disk-errors

Display any system disk errors. This option is only available on hardware models.

disk-health

Display disk health information. This option is only available on hardware models.

disk-info

Display disk hardware status information. This option is only available on hardware models.

hardware-info

Display general hardware status information. Use this option to view CPU, memory, disk, and RAID information, as well as system time settings, and hardware temperature, fan speed, Power Supply Status, hard-disk status.

raid-hwinfo

Display RAID hardware status information, including if auto RAID (AutoRebuild) is enabled. This option is only available on hardware models.

tac-report

A collection of config, diagnose, system, and utility commands for monitoring and troubleshooting purposes.

test-network

Test the network connection. Use the output to detect network speed and connection to FDN servers and Microsoft servers.

Fort deatils, see test-network.