Diagnose commands
The following diagnostic commands are available:
|
Command |
Description |
|---|---|
|
Record all CLI input and output. |
|
|
Display detailed debug logs of network share scan and communications with devices. |
|
|
Record the kernel ring buffer. |
|
|
Display system performance information. |
|
|
Display system top information. |
|
|
Display system disk attributes. This option is only available on hardware models. |
|
|
Display any system disk errors. This option is only available on hardware models. |
|
| Display disk health information. This option is only available on hardware models. | |
| Display disk hardware status information. This option is only available on hardware models. | |
|
Display general hardware status information. Use this option to view CPU, memory, disk, and RAID information, as well as system time settings, and hardware temperature, fan speed, Power Supply Status, hard-disk status. |
|
|
Display RAID hardware status information, including if auto RAID (AutoRebuild) is enabled. This option is only available on hardware models. |
|
|
A collection of config, diagnose, system, and utility commands for monitoring and troubleshooting purposes. |